alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
e8fc27da7d
esp-idf/components/idf_test/integration_test/TC_IT_WIFI_CONN.yml
He Yin Ling f1bf446410 test: split CI test environment: 
Currently CI test environment is complicated, usually includes NIC, AP.
These devices are not used for a lot test cases. Therefore we split the
test environment, remove unnecessary devices. Then it will be easier to
create CI runners.
2018-09-06 16:35:34 +08:00

2113 lines
55 KiB
YAML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

test cases:
- CI ready: 'Yes'
ID: WIFI_CONN_0101
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <target_ssid> -t 0
- - R SSC1 C +SAP:OK
- - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
- - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t 2
- - R SSC1 C +SAP:OK
- - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
- - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
- - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t 4
- - R SSC1 C +SAP:OK
- - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
- - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t 1
- - R SSC1 C +SAP:OK
- - SSC SSC2 sta -S
- - R SSC2 RE "\+SCAN:%%s,.+,0,\d+"%%(<target_ssid>) C +SCANDONE
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t 5
- - R SSC1 C +SAP:OK
- - SSC SSC2 sta -S
- - R SSC2 RE "\+SCAN:%%s,.+,0,\d+"%%(<target_ssid>) C +SCANDONE
execution time: 0.0
expected result: "1.target1 set AP,open, \n2.target 2 jap succeed\n3.target1 set
AP,wpa_psk \n4.target 2 jap succeed\n5.target1 set AP, wpa2_psk \n6.target 2 jap
succeed\n7.target1 set AP,wap_wpa2_psk\n8.target 2 jap succeed\n9.target1 set
AP,加密方式为t 1\n10.target 2 上查询到target_ssid\n11.target1 set AP,加密方式为t 5\n12.target
2 上查询到target_ssid"
initial condition: T2_1
level: Integration
module: WIFI MAC
steps: "1.target1下设置ssid 和pwd,加密方式 open\n2.target2 jap target1\n3.target1下设置ssid
和pwd,加密方式 wpa_psk \n4.target2 jap target1\n5.target1下设置ssid 和pwd,加密方式 wpa2_psk
\n6.target 2 jap target1\n7.target1下设置ssid 和pwd,加密方式 wap_wpa2_psk\n8.target2 jap
target1\n9.target1下设置ssid 和pwd,加密方式 wep \n10.target2上查询target_ssid\n11.target1下设置ssid
和pwd,加密方式 t 5 错误的加密方式\n12.target2上查询 target_ssid"
sub module: WIFI Connect
summary: station SAP+JAP test, different encryption
test environment: SSC_T2_5
test point 1: basic function
test point 2: SAP/JAP with different config
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_0102
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <target_ssid> -t 0 -n 1
- - R SSC1 C +SAP:OK
- - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
- - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
- - SSC SSC1 ap -S -s <target_ssid> -t 0 -n 13
- - R SSC1 C +SAP:OK
- - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
- - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
- - SSC SSC1 ap -S -s <target_ssid> -n 15
- - R SSC1 C +SAP:OK
- - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
- - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
- - SSC SSC2 sta -S
- - R SSC2 RE "\+SCAN:%%s,.+,\d+,1"%%(<target_ssid>)
execution time: 0.0
expected result: |-
1. target1 set AP,set channel 1
2.target 2 jap succeed
3.target1 set AP,set channel 10
4.target 2 jap succeed
5.target1 set AP,set channel 15
6.target 2 上查询到target_ssid
initial condition: T2O_1
level: Integration
module: WIFI MAC
steps: |-
1. target1下设置ssid 和pwd 加密方式,set channel 1
2.target2 jap target 1
3.target1下设置ssid 和pwd 加密方式,set channel 10
4.target2 jap target 1
5.target1下设置ssid 和pwd 加密方式,set channel 15
6.target 2 上查询target_ssid
sub module: WIFI Connect
summary: station SAP+JAP test, different channel
test environment: SSC_T2_5
test point 1: basic function
test point 2: SAP/JAP with different config
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_0103
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum> -h
0
- - R SSC1 C +SAP:OK
- - SSC SSC2 sta -S -h 0
- - R SSC2 P <target_ap_mac>
- R SSC2 C +SCANDONE
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum> -h
1
- - R SSC1 C +SAP:OK
- - DELAY 3
- - ''
- - SSC SSC2 sta -S -h 0
- - R SSC2 C +SCANDONE
- - DELAY 3
- - ''
- - SSC SSC2 sta -S -h 0
- - R SSC2 NP <target_ap_mac> C +SCANDONE
execution time: 0.0
expected result: |-
1.target1 set AP,set ssid broad cast
2.target 2上scan target_ap_mac
3.target1 set AP,set ssid hidden,
4.target 2上不能scan target_ap_mac
initial condition: T2_1
level: Integration
module: WIFI MAC
steps: |-
1. target1下设置ssid 和pwd 加密方式,set ssid broad cast
2.target 2上scan target_ap_mac
3. target1下设置ssid 和pwd 加密方式,set ssid hidden,
4.target 2上scan target_ap_mac
sub module: WIFI Connect
summary: station SAP+JAP test, ssid hidden
test environment: SSC_T2_5
test point 1: basic function
test point 2: SAP/JAP with different config
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_0104
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: '1/2'
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum> -m
1
- - R SSC1 C +SAP:OK
- - WIFI <pc_wifi_nic> DISCONN
- - R PC_COM C +WIFIDISCONN:OK
- - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
- - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- - R PC_COM C +WIFICONN:ERROR
execution time: 0.0
expected result: |-
1. target1 set AP,set max allowed sta as 1
2. use PC disconnect,
3.target 2 jap succeed
4.PC WIFI can not CONN
initial condition: T2_1
level: Integration
module: WIFI MAC
steps: |-
1.target1下设置ssid 和pwd 加密方式,set max allowed sta as 1
2.use PC disconnect target1
3.target 2 jap target1
4.PC WIFI CONNECT target1
sub module: WIFI Connect
summary: station SAP test, max allowed sta
test environment: SSC_T2_2
test point 1: basic function
test point 2: SAP/JAP with different config
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_0201
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- - R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)
- - SSC SSC1 sta -Q
- - R SSC1 RE "\+JAP:CONNECTED,%%s,%%s"%%(<ap_mac>,<ap_ssid>)
- - SSC SSC1 sta -D
- - R SSC1 C +QAP:OK
- - SSC SSC1 sta -Q
- - R SSC1 C +JAP:DISCONNECTED
execution time: 0.0
expected result: |-
1.target1 jion AP 成功
2.查询JAP的状态
3.target1 断开AP
4.查询target1 JAP 是DISCONN
initial condition: STAM1
level: Integration
module: WIFI MAC
steps: |-
1.target1 jion AP 成功
2.查询JAP的状态
3.target1 断开AP
4.查询target1 JAP 是DISCONN
sub module: WIFI Connect
summary: JAP query test
test environment: SSC_T1_5
test point 1: basic function
test point 2: query JAP status
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_0301
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum> -h
0 -m 8
- - R SSC1 C +SAP:OK
- - SSC SSC1 ap -Q
- - R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,3,0,8,\d+"%%(<target_ssid>,<target_password>)
execution time: 0.0
expected result: |
1. target1 set AP
2.target 1上查询到跟设置AP时一致
initial condition: APM1
level: Integration
module: WIFI MAC
steps: |
1. target1 set AP
2.target 1上查询到跟设置AP时一致
sub module: WIFI Connect
summary: AP config query test
test environment: SSC_T1_4
test point 1: basic function
test point 2: query AP config
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_0302
SDK: |-
8266_NonOS
8266_RTOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 sta -S
- - R SSC1 C +SCAN_DONE:OK
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- - P SSC1 C +JAP:CONNECTED
- P SSC1 C +SCANDONE
- - SSC SSC1 sta -D
- - R SSC1 C +QAP:OK
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- - ''
- - SSC SSC1 sta -S
- - P SSC1 C +JAP:CONNECTED
- P SSC1 C +SCANDONE
execution time: 0.0
expected result: |
2. scan succeed, JAP succeed
5. JAP succeed, scan succeed
initial condition: STAM1
level: Integration
module: WIFI MAC
steps: |
1. target 1 STA join AP
2. target 1 STA scan before JAP succeed
3. target 1 quite AP
4. target 1 scan
5. target 1 JAP before scan succeed
sub module: WIFI Connect
summary: JAP during scan
test environment: SSC_T1_5
test point 1: interaction
test point 2: Conn interact with other WiFi operation
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_0302
SDK: |-
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 sta -S
- - R SSC1 C +SCAN_DONE:OK
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- - P SSC1 C +JAP:CONNECTED
- P SSC1 C +SCANFAIL
- - SSC SSC1 sta -D
- - R SSC1 C +QAP:OK
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- - ''
- - SSC SSC1 sta -S
- - P SSC1 C +JAP:CONNECTED
- P SSC1 C +SCAN:ERROR
execution time: 0.0
expected result: |
2. scan failed, JAP succeed
5. JAP succeed, scan failed
initial condition: STAM1
level: Integration
module: WIFI MAC
steps: |
1. target 1 STA join AP
2. target 1 STA scan before JAP succeed
3. target 1 quite AP
4. target 1 scan
5. target 1 JAP before scan succeed
sub module: WIFI Connect
summary: JAP during scan
test environment: SSC_T1_5
test point 1: interaction
test point 2: Conn interact with other WiFi operation
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_0401
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 sta -R -a 0
- - R SSC1 C +AUTORECONN:OK
- - SSC SSC1 sta -R -a 2
- - R SSC1 C +AUTORECONN:0
- - SSC SSC1 reboot
- - ''
- - DELAY 15
- - ''
- - SSC SSC1 sta -Q
- - R SSC1 C JAP:DISCONNECTED
- - SSC SSC1 sta -R -a 1
- - R SSC1 C +AUTORECONN:OK
- - SSC SSC1 sta -R -a 2
- - R SSC1 C +AUTORECONN:1
- - SSC SSC1 reboot
- - R SSC1 C +JAP:CONNECTED
execution time: 0.0
expected result: |-
1.设置autoreconn,关闭
2.查询当前autoreconn状态是否关闭
3.重启系统，等待15s
4.查询target1 未自动重连AP
5.设置autoreconn,开启
6.查询当前autoreconn状态是否开启
7.系统重启后target1 自动重连AP
initial condition: STAM2
level: Integration
module: WIFI MAC
steps: |-
1.设置autoreconn,关闭
2.查询当前autoreconn状态是否关闭
3.重启系统，等待15s
4.查询target1 未自动重连AP
5.设置autoreconn,开启
6.查询当前autoreconn状态是否开启
7.系统重启后target1 自动重连AP
sub module: WIFI Connect
summary: auto reconnect test
test environment: SSC_T1_5
test point 1: basic function
test point 2: power on auto reconnect test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_0501
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC2 sta -R -r 1
- - R SSC2 C +RECONN:OK
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
- - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
- - SSC SSC1 op -S -o 1
- - R SSC1 C +MODE:OK
- - DELAY 10
- - ''
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - DELAY 15
- - R SSC2 C +JAP:CONNECTED
- - SSC SSC2 sta -R -r 0
- - R SSC2 C +RECONN:OK
- - SSC SSC2 sta -R -r 2
- - R SSC2 C +RECONN:0
- - SSC SSC1 op -S -o 1
- - R SSC1 C +MODE:OK
- - DELAY 10
- - ''
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - DELAY 15
- - P PC_COM C +DELAYDONE
- P SSC2 NC +JAP:CONNECTED
- - SSC SSC2 sta -R -r 1
- - R SSC2 C +RECONN:OK
execution time: 0.0
expected result: |-
1.设置reconn,开启（此功能不需要重启系统）
2.target1 set AP
3.target2 JAP target1 成功
4.target2 断开target1 连接
5.等待10s，target2 自动重连target1
6.成功
7.查询reconn状态，关闭
8.修改mode 成功
9.等待15s，target2 不会自动重连target1
initial condition: T2_1
level: Integration
module: WIFI MAC
steps: "1.设置reconn,开启（此功能不需要重启系统）\n2.target1下设置ssid 和pwd 加密方式\n3.target2 JAP target1
\n4.target1 修改mode 为sta mode\n5.等待10s，target1 修改mode 为softAP mode\n6.设置reconn，关闭\n7.查询reconn状态，关闭\n8.target1
修改mode 为sta mode\n9.等待15s，target1 修改mode 为softAP mode"
sub module: WIFI Connect
summary: reconnect policy test
test environment: SSC_T2_5
test point 1: basic function
test point 2: reconnect policy test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_0502
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
- - R SSC2 C +JAP:CONNECTED
- - SSC SSC2 sta -R -r 1
- - R SSC2 C +RECONN:OK
- - SSC SSC1 op -S -o 1
- - R SSC1 C +MODE:OK
- - DELAY 5
- - R SSC2 C +JAP:DISCONNECTED
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - DELAY 10
- - R SSC2 C +JAP:CONNECTED
- - SSC SSC2 sta -D
- - R SSC2 C +QAP:OK
- - DELAY 10
- - P PC_COM C +DELAYDONE
- P SSC2 NC +JAP:CONNECTED
execution time: 0.0
expected result: |-
1.target1 set AP
2.target2 jap target 1
3.设置reconn,开启（此功能不需要重启系统）
4.target2 断开target1 连接
5.等待10s，target2 自动重连target1
6.target2 断开target1 连接
initial condition: T2_1
level: Integration
module: WIFI MAC
steps: |-
1.target1下设置ssid 和pwd 加密方式
2.target2 jap target 1
3.设置reconn,开启（此功能不需要重启系统）
4.target2 断开target1 连接
5.等待10s，target2 自动重连target1
6.target2 断开target1 连接
sub module: WIFI Connect
summary: will not do reconnect after manually disconnected
test environment: SSC_T2_5
test point 1: abnormal/special use
test point 2: reconnect policy test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_0503
SDK: |-
8266_NonOS
8266_RTOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 sta -R -r 0
- - R SSC1 C OK
- - SSC SSC1 sta -C -s <random_string> -p <random_string>
- - R SSC1 C +JAP:OK
- R SSC1 NC +JAP:DISCONNECTED,1 C +JAP:DISCONNECTED,3
- - DELAY 5
- - R SSC1 NC +JAP:DISCONNECTED
- P PC_COM C +DELAYDONE
- - SSC SSC1 sta -C -s <ap_ssid> -p <random_string>
- - R SSC1 C +JAP:OK
- R SSC1 NC +JAP:DISCONNECTED,1 C +JAP:DISCONNECTED,2
- - DELAY 5
- - R SSC1 NC +JAP:DISCONNECTED
- P PC_COM C +DELAYDONE
- - SSC SSC1 sta -R -r 1
- - SSC SSC1 C OK
execution time: 0.0
expected result: |-
1. succeed
2. not reconnect when connect failed, status when recv disconnect event is correct
3. not reconnect when connect failed, status when recv disconnect event is correct
4. succeed
initial condition: STAM1
level: Integration
module: WIFI MAC
steps: |
1. set sta reconnect policy as not reconnect
2. sta connect to ap not exist
3. sta connect to ap with wrong password
4. reset sta reconnect policy as auto reconnect
sub module: WIFI Connect
summary: reconnect policy interact with failed STA connect/reconnect
test environment: SSC_T1_1
test point 1: basic function
test point 2: reconnect policy test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_0601
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- - R PC_COM C +WIFICONN:OK
- - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
- - R SSC2 C +JAP:CONNECTED
- - SSC SSC1 ap -L
- - 'R SSC1 C +LSTA:'
- 'R SSC1 C +LSTA:'
- R SSC1 C +LSTADONE
execution time: 0.0
expected result: |-
1.target1 set AP
2.PC WIFI CONNECTED
3.target2 jap target 1
4.查询到两个sta 连接到target1 上
initial condition: T2_1
level: Integration
module: WIFI MAC
steps: |-
1. target1下设置ssid 和pwd 加密方式
2.PC WIFI CONNECTED target1
3.target2 jap target 1
4.查询到两个sta 连接到target1 上
sub module: WIFI Connect
summary: list stations connected to soft ap test
test environment: SSC_T2_2
test point 1: basic function
test point 2: list SoftAP connected station
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_0701
SDK: |-
8266_NonOS
8266_RTOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 sta -D
- - R SSC1 C QAP
- - SSC SSC1 sta -Q
- - R SSC1 C +STA_STATUS:0
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- - R SSC1 C +JAP:OK
- - SSC SSC1 sta -Q
- - R SSC1 C +STA_STATUS:1
- R SSC1 C +JAP:CONNECTED
- - SSC SSC1 sta -Q
- - R SSC1 C +STA_STATUS:5
- - APC <APC1> OFF <ap_apc>
- - P PC_COM L OK
- P SSC1 C bcn_timout
- - SSC SSC1 sta -Q
- - R SSC1 C +STA_STATUS:4
- - APC <APC1> ON <ap_apc>
- - P PC_COM L OK
execution time: 0.0
expected result: |-
1. idle state
2. connecting state
3. got IP state
4. connect fail state
initial condition: STAM1
level: Integration
module: WIFI MAC
steps: |-
1. sta disconnected, query status
2. sta connect to AP, query status
3. got IP, query status
4. AP power off, query status when beacon timeout
sub module: WIFI Connect
summary: check wifi status idle, connecting, got ip and connect fail
test environment: SSC_T1_APC
test point 1: basic function
test point 2: wifi connect status check
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_0702
SDK: |-
8266_NonOS
8266_RTOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 sta -C -s <random_string> -p <random_string>
- - R SSC1 C +JAP:OK
- R SSC1 C +JAP:DISCONNECTED,3
- - SSC SSC1 sta -C -s <ap_ssid> -p <random_string>
- - R SSC1 C +JAP:OK
- R SSC1 C +JAP:DISCONNECTED,2
execution time: 0.0
expected result: |-
1. get status AP not exist in disconnect event
2. get status wrong password in disconnect event
initial condition: STAM1
level: Integration
module: WIFI MAC
steps: |
1. sta connect to ap not exist
2. sta connect to ap with wrong password
sub module: WIFI Connect
summary: check wifi status wrong password, no ap found
test environment: SSC_T1_1
test point 1: basic function
test point 2: wifi connect status check
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_0703
SDK: |-
8266_NonOS
8266_RTOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 sta -C -s <wep_ap_ssid> -p bacfd
- - R SSC1 C +JAP:DISCONNECTED,4,2
execution time: 0.0
expected result: 1. connect status connect fail in disconnect evnet
initial condition: STAM1
level: Integration
module: WIFI MAC
steps: 1. connect WEP ap with error password (valid wep password)
sub module: WIFI Connect
summary: check wifi status connect fail
test environment: SSC_T1_WEP
test point 1: basic function
test point 2: wifi connect status check
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_0801
SDK: |-
8266_NonOS
8266_RTOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 0
- - R SSC1 C +SAP:OK
- - SSC SSC2 sta -C -s <random_string> -p <random_string>
- - R SSC2 C +JAP:CONNECTED
- - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 2
- - P SSC1 C +SAP:OK
- P SSC2 C +JAP:AUTHCHANGED,2,0
- - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 3
- - P SSC1 C +SAP:OK
- P SSC2 C +JAP:AUTHCHANGED,3,2
- - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 4
- - P SSC1 C +SAP:OK
- P SSC2 C +JAP:AUTHCHANGED,4,3
- - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 0
- - P SSC1 C +SAP:OK
- P SSC2 C +JAP:AUTHCHANGED,0,4
execution time: 0.0
expected result: |-
1. succeed
2. succeed
3. auth change event old mode 0 new mode 2
4. auth change event old mode 2 new mode 3
5. auth change event old mode 3 new mode 4
6. auth change event old mode 4 new mode 0
initial condition: T2_1
level: Integration
module: WIFI MAC
steps: |-
1. set target1 softap auth mode 0
2. target2 connect to target1
3. set target1 softap auth mode 2, wait sta connected
4. set target1 softap auth mode 3, wait sta connected
5. set target1 softap auth mode 4, wait sta connected
6. set target1 softap auth mode 0, wait sta connected
sub module: WIFI Connect
summary: test auth change event
test environment: SSC_T2_5
test point 1: basic function
test point 2: wifi auth changed event test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_0901
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: basic function
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- - R SSC1 C +JAP:CONNECTED
- - SSC SSC1 sta -D
- - R SSC1 RE JAP:DISCONNECTED,\d+,8
- - SSC SSC1 sta -C -s <ap_ssid> -p <random_string>
- - R SSC1 RE JAP:DISCONNECTED,\d+,15
- - SSC SSC1 sta -C -s <random_string> -p <ap_password>
- - R SSC1 RE JAP:DISCONNECTED,\d+,201
execution time: 0.0
expected result: |-
1. disconnect event reason REASON_ASSOC_LEAVE
2. disconnect event reason REASON_4WAY_HANDSHAKE_TIMEOUT
3. disconnect event reason REASON_NO_AP_FOUND
initial condition: STAM1
level: Integration
module: WIFI MAC
steps: |-
1. sta connect to AP, and disconnect
2. connect to AP with wrong password
3. connect to AP not exist
sub module: WIFI Connect
summary: test wifi disconnect reason REASON_ASSOC_LEAVE, REASON_4WAY_HANDSHAKE_TIMEOUT,
REASON_NO_AP_FOUND
test environment: SSC_T1_1
test point 1: basic function
test point 2: wifi disconnect reason test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_0902
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - APC <APC1> OFF <ap_apc>
- - P PC_COM L OK
- R SSC1 RE JAP:DISCONNECTED,\d+,200
- - APC <APC1> ON <ap_apc>
- - P PC_COM L OK
execution time: 0.0
expected result: |-
1. succeed
2. disconnect event REASON_BEACON_TIMEOUT
initial condition: STAM2
level: Integration
module: WIFI MAC
steps: |-
1. connect to AP
2. AP power off
sub module: WIFI Connect
summary: test wifi disconnect reason REASON_BEACON_TIMEOUT
test environment: SSC_T1_APC
test point 1: basic function
test point 2: wifi disconnect reason test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: WIFI_CONN_0903
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: '1/2'
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 sta -C -s <wep_ap_ssid> -p bacfd
- - R SSC1 RE JAP:DISCONNECTED,\d+,2
execution time: 0.0
expected result: 1. disconect event reason REASON_AUTH_EXPIRE
initial condition: STAM1
level: Integration
module: WIFI MAC
steps: 1. connect WEP ap with error password (valid wep password)
sub module: WIFI Connect
summary: test wifi disconnect reason REASON_AUTH_EXPIRE
test environment: SSC_T1_WEP
test point 1: basic function
test point 2: wifi disconnect reason test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_0904
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: '2/3'
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 3 -m 1
- - R SSC1 C +SAP:OK
- - SSC SSC2 sta -C -s <random_string> -p 1234567890
- - R SSC2 RE JAP:DISCONNECTED,\d+,204
- - SSC SSC2 sta -D
- - R SSC2 C +QAP:OK
- - WIFI <pc_wifi_nic> CONN <random_string> <random_string> <pc_ip_wifi>
- - R PC_COM NC ERROR C +WIFICONN:OK
- - SSC SSC2 sta -C -s <random_string> -p <random_string>
- - R SSC2 RE JAP:DISCONNECTED,\d+,5
execution time: 0.0
expected result: |-
1. succeed
2. disconnect event REASON_HANDSHAKE_TIMEOUT
3. succeed
4. succeed
5. disconnect event REASON_ASSOC_TOOMANY
initial condition: T2_1
level: Integration
module: WIFI MAC
steps: |-
1. config target1 softap max sta allowed 1
2. target2 connect to target1 with wrong password
3. target2 disconnect
4. PC WIFI NIC connect to target1
5. target2 connect to target1 with correct password
sub module: WIFI Connect
summary: test wifi disconnect reason REASON_ASSOC_TOOMANY, REASON_HANDSHAKE_TIMEOUT
test environment: SSC_T2_2
test point 1: basic function
test point 2: wifi disconnect reason test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: WIFI_CONN_1001
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'No'
category: Function
cmd set: ''
execution time: 1.0
expected result: 4.平均beacon delay时间小于10ms
initial condition: None
level: Integration
module: WIFI MAC
steps: |-
1.target设置成AP 模式
2.PC 端启动wireshark 抓包工具抓取target beacon包
3.停止抓包将抓取的beacon 包以txt格式导出
4.利用脚本计算beacon delay时间
sub module: WIFI Connect
summary: beacon delay
test environment: SSC_T1_1
test point 1: basic function
test point 2: beacon delay
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_1101
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ram -Q
- - R SSC1 A <FREg>:\+FREEHEAP:(\d+)\r\n
- - SSC SSC1 op -W -a start
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a stop
- - R SSC1 C +MODE:OK
- - SSC SSC1 ram -Q
- - R SSC1 P <FREg>
execution time: 0
expected result: |
1. get current heap size
2.OK
3.OK
4.heap size unchanged
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. check heap size
2. wifi start
3. wifi stop
4. check heap size
sub module: WIFI Connect
summary: wifi start and stop, heap size unchanged
test environment: SSC_T1_4
test point 1: basic function
test point 2: wifi start and stop, heap size unchanged
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1201
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- - R SSC1 C +JAP:ERROR
execution time: 0
expected result: |
1. ERROR
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. sta connect
sub module: WIFI Connect
summary: sta connect after WiFi stop
test environment: SSC_T1_4
test point 1: basic function
test point 2: use WiFi API after WiFi stop
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1202
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 sta -R -a 1
- - R SSC1 C +AUTORECONN:OK
- - SSC SSC1 sta -Q
- - R SSC1 C +JAP:DISCONNECTED
execution time: 0
expected result: |
1. OK
2. DISCONNECTED
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. sta reconnect start
2. query sta state
sub module: WIFI Connect
summary: sta reconnect start and connect fail after WiFi stop
test environment: SSC_T1_5
test point 1: basic function
test point 2: use WiFi API after WiFi stop
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1203
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 sta -D
- - R SSC1 C +QAP:ERROR
execution time: 0
expected result: |
1. ERROR
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. sta disconnect
sub module: WIFI Connect
summary: station disconnect after WiFi stop
test environment: SSC_T1_4
test point 1: basic function
test point 2: use WiFi API after WiFi stop
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1204
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 sta -Q
- - R SSC1 C +JAP:DISCONNECTED
execution time: 0
expected result: |
1. DISCONNECTED
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. query sta state
sub module: WIFI Connect
summary: query sta state after WiFi stop
test environment: SSC_T1_4
test point 1: basic function
test point 2: use WiFi API after WiFi stop
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1205
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 sta -S -s <ap_ssid>
- - R SSC1 C +SCAN:ERROR,1
execution time: 0
expected result: |
1. ERROR
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. sta scan ssid and pwd
sub module: WIFI Connect
summary: sta scan after WiFi stop
test environment: SSC_T1_4
test point 1: basic function
test point 2: use WiFi API after WiFi stop
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1206
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -C -s <target_ssid> -p <target_password>
- - R SSC1 C +JAP:ERROR
execution time: 0
expected result: |
1. ERROR
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. ap connect ssid and pwd
sub module: WIFI Connect
summary: ap connect after WiFi stop
test environment: SSC_T1_4
test point 1: basic function
test point 2: use WiFi API after WiFi stop
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1207
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -D
- - R SSC1 C +QAP:ERROR
execution time: 0
expected result: |
1. ERROR
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. ap disconnect
sub module: WIFI Connect
summary: ap disconnect after WiFi stop
test environment: SSC_T1_4
test point 1: basic function
test point 2: use WiFi API after WiFi stop
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1208
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -L
- - R SSC1 C +LSTADONE
execution time: 0
expected result: |
1. +LSTADONE
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. ap list station
sub module: WIFI Connect
summary: ap list station after WiFi stop
test environment: SSC_T1_4
test point 1: basic function
test point 2: use WiFi API after WiFi stop
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1209
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -Q
- - 'R SSC1 C +APCONFIG:'
execution time: 0
expected result: |
1. +APCONFIG:ssid and pwd
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. query ap config
sub module: WIFI Connect
summary: query ap config after WiFi stop
test environment: SSC_T1_4
test point 1: basic function
test point 2: use WiFi API after WiFi stop
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1210
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password>
- - R SSC1 C +SAP:OK
- - SSC SSC1 op -S -o 1
- - R SSC1 C +MODE:OK
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password>
- - R SSC1 C +SAP:ERROR
execution time: 0
expected result: |
1. OK
2. OK
3. OK
4. ERROR
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. set ap mode
2. ap set ssid and pwd
3. set station mode
4. ap set ssid and pwd
sub module: WIFI Connect
summary: ap set ssid and pwd after WiFi stop
test environment: SSC_T1_4
test point 1: basic function
test point 2: use WiFi API after WiFi stop
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1211
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 mac -Q
- - 'R SSC1 C MAC:'
execution time: 0
expected result: |
1. MAC:
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. query mac
sub module: WIFI Connect
summary: query mac after WiFi stop
test environment: SSC_T1_4
test point 1: basic function
test point 2: use WiFi API after WiFi stop
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1212
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,OK
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- - R SSC1 C +MAC:STA,ERROR
execution time: 0
expected result: |
1. OK
2. OK
3. ERROR
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. set ap mode
2. set ap mac
3. set station mac
sub module: WIFI Connect
summary: enable AP mode after WiFi stop and set AP mac
test environment: SSC_T1_4
test point 1: basic function
test point 2: use WiFi API after WiFi stop
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1213
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 op -S -o 1
- - R SSC1 C +MODE:OK
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- - R SSC1 C +MAC:STA,OK
- - SSC SSC1 mac -Q -o 1
- - 'R SSC1 C +STAMAC:'
execution time: 0
expected result: |
1. OK
2. OK
3. get station mac
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. set station mode
2. set station mac
3. query station mac
sub module: WIFI Connect
summary: enable STA mode after WiFi stop and set STA mac
test environment: SSC_T1_4
test point 1: basic function
test point 2: use WiFi API after WiFi stop
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1214
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 op -S -o 1
- - R SSC1 C +MODE:OK
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- - R SSC1 C +MAC:STA,OK
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,ERROR
execution time: 0
expected result: |
1. OK
2. OK
3. ERROR
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. set station mode
2. set station mac
3. set ap mac
sub module: WIFI Connect
summary: enable STA mode after WiFi stop and set AP mac
test environment: SSC_T1_4
test point 1: basic function
test point 2: use WiFi API after WiFi stop
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1215
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 channel -S -c 13
- - R SSC1 C +CHANNEL:ERROR
execution time: 0
expected result: |
1. +CHANNEL:ERROR
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. set channel
sub module: WIFI Connect
summary: set channel after WiFi stop
test environment: SSC_T1_4
test point 1: basic function
test point 2: use WiFi API after WiFi stop
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1216
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 channel -S -c 13
- - R SSC1 C +CHANNEL:ERROR
- - SSC SSC1 channel -G
- - R SSC1 C +CHANNEL
execution time: 0
expected result: |
1. +CHANNEL:ERROR
2. +CHANNEL
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. set channel
2. query channel
sub module: WIFI Connect
summary: query channel after WiFi stop
test environment: SSC_T1_4
test point 1: basic function
test point 2: use WiFi API after WiFi stop
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1217
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 op -Q
- - R SSC1 C +MODE:OK
execution time: 0
expected result: |
1. +CURMODE:2
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. query current mode
sub module: WIFI Connect
summary: be AP mode after WiFi stop
test environment: SSC_T1_4
test point 1: basic function
test point 2: use WiFi API after WiFi stop
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1218
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 op -S -o 1
- - R SSC1 C +MODE:OK
execution time: 0
expected result: |
1. OK
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. set STA mode
sub module: WIFI Connect
summary: set STA mode after WiFi stop
test environment: SSC_T1_4
test point 1: basic function
test point 2: use WiFi API after WiFi stop
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1219
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
execution time: 0
expected result: |
1. OK
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. set AP mode
sub module: WIFI Connect
summary: set ap mode after WiFi stop
test environment: SSC_T1_4
test point 1: basic function
test point 2: use WiFi API after WiFi stop
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1301
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 op -W -a init
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a start
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a deinit
- - R SSC1 C +MODE:ERROR
- - SSC SSC1 op -W -a stop
- - R SSC1 C +MODE:OK
execution time: 0
expected result: |
1. OK
2. OK
3. ERROR
4. OK
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. wifi init
2. wifi start
3. wifi deinit
4. wifi stop
sub module: WIFI Connect
summary: incorrect deinit stop flow
test environment: SSC_T1_4
test point 1: basic function
test point 2: WiFi deinit and stop
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1302
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 op -W -a init
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a deinit
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a start
- - R SSC1 C +MODE:ERROR
- - SSC SSC1 op -W -a stop
- - R SSC1 C +MODE:ERROR
execution time: 0
expected result: |
1. OK
2. OK
3. ERROR
4. ERROR
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. wifi init
2. wifi deinit
3. wifi start
4. wifi stop
sub module: WIFI Connect
summary: incorrect deinit start flow
test environment: SSC_T1_4
test point 1: basic function
test point 2: WiFi deinit and start
version: v1 (2016-12-31)
- CI ready: 'Yes'
ID: WIFI_CONN_1303
SDK: ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 op -W -a init
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a init
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a start
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a deinit
- - R SSC1 C +MODE:ERROR
- - SSC SSC1 op -W -a deinit
- - R SSC1 C +MODE:ERROR
- - SSC SSC1 op -W -a stop
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a deinit
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a start
- - R SSC1 C +MODE:ERROR
execution time: 0
expected result: |
1. OK
2. OK
3. OK
4. ERROR
5. ERROR
6. OK
7. OK
8. ERROR
initial condition: WIFISTO
level: Integration
module: WIFI MAC
steps: |
1. wifi init
2. wifi init
3. wifi start
4. wifi deinit
5. wifi deinit
6. wifi stop
7. wifi deinit
8. wifi start
sub module: WIFI Connect
summary: incorrect init start flow
test environment: SSC_T1_4
test point 1: basic function
test point 2: WiFi deinit and stop
version: v1 (2016-12-31)
- CI ready: 'No'
ID: WIFI_CONN_5001
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- WiFiStress/WifiJAP
- - target_ap_num = 10
- - '["TENDA123456", 11, "1234567890", 10, 10, 3, 2]'
- - test_count = 500
- - '["not_pig_head", 12, "", 0, 10, 0, 3]'
- - join_test_method = ["Normal", "OFF_ON"]
- - '["MW300R_T", 8, "12345", 5, 9, 0, 5]'
- - join_delay = [[0, 4], [0, 5]]
- - '["AC750", 5, "1234567890", 10, 1, 0, 8]'
- - step_config = [0x0B, 0x07, 0x02]
- - '["AUF", 3, "1234567890", 10, 9, 0, 1]'
- - reconnect_test_method = ["OFF_ON"]
- - ''
- - reconnect_delay = [[0, 10], [2, 10]]
- - ''
execution time: 5.0
expected result: |-
1. SAP succeed
2. JAP succeed
3. reconnect succeed
initial condition: None
level: Integration
module: WIFI MAC
steps: |-
1. random generate test parameter (ssid, password, auth type, ssid hidden/broadcast), SAP and JAP
2. power off AP during JAP, power on AP
3. power off AP after JAP succeed, power on AP
Loop step 1-3
sub module: WIFI Connect
summary: 使用各种可能的 ssid+password+auth type 组合进行SAP和JAP；JAP过程中AP随机断电或更改设置；AP随机断电后重连
test environment: SSC_T2_JAP
test point 1: function + performance + stress
test point 2: JAP stress test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_5101
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- WiFiStress/SoftAPNSTA
- - sta_num = 4
- - dummy
- - max_sta = 4
- - ''
- - test_time = 300
- - ''
- - delay1 = [0, 1]
- - ''
- - delay2 = [0, 1]
- - ''
- - change_mac = True
- - ''
- - channel = 1
- - ''
execution time: 5.0
expected result: |-
1. succeed
2. JAP succeed
initial condition: None
level: Integration
module: WIFI MAC
steps: |-
1. 1 target set to softap mode and rest set to sta mode
2. all sta random join and disconnect from softap
Loop step 2
sub module: WIFI Connect
summary: max sta connect to SotfAP and disconnect
test environment: SSC_T5_1
test point 1: stress
test point 2: SoftAP WIFI connect/disconnect stress test
version: v2 (2016-11-15)
- CI ready: 'No'
ID: WIFI_CONN_5102
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- WiFiStress/WifiJAPAtt
- - test_count = 5
- - dummy
execution time: 5.0
expected result: |-
2. Scan succeed with RSSI > -90
3. Join succeed with RSSI > -90
initial condition: STAM1
level: Integration
module: WIFI MAC
steps: |-
1. config attenuator (0-59)
2. scan AP to get AP RSSI
3. try to join AP
Loop step 1 - 3
sub module: WIFI Connect
summary: connect AP with rssi from -50 to -100
test environment: SSC_T1_ShieldBox
test point 1: stress
test point 2: JAP with different RSSI
version: v1 (2016-8-15)
- CI ready: 'No'
ID: WIFI_CONN_5103
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- WiFiStress/WifiJAPAtt
- - test_count = 5
- - dummy
- - att_test_list = range(30, 50)
- - ''
execution time: 5.0
expected result: |-
2. Scan succeed with RSSI > -90
3. Join succeed with RSSI > -90
initial condition: STAM1
level: Integration
module: WIFI MAC
steps: |-
1. config attenuator (30-59)
2. scan AP to get AP RSSI
3. try to join AP
Loop step 1 - 3
sub module: WIFI Connect
summary: connect AP with rssi from -80 to -100
test environment: SSC_T1_ShieldBox
test point 1: stress
test point 2: JAP with different RSSI
version: v1 (2016-8-15)
- CI ready: 'No'
ID: WIFI_CONN_5104
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- WiFiStress/WifiJAPScanSpecified
- - target_ap_num = 6
- []
- - test_count = 50
- []
- - test_times = 2
- []
execution time: 5.0
expected result: |-
1. JAP succeed
2. reconnect succeed and connection time less than 1.5s
3. connect succeed, and connection time less than 1.5s
initial condition: None
level: Integration
module: WIFI MAC
steps: 1. SSC target connect the first five AP, first 5 AP which will be stored
to connected AP cached of DUT. 2. SSC target reconnect ap. 3. SSC target connect
the last AP, last AP will not be stored in AP cache and DUT do not know the channel
of this AP. Loop step 1-3
sub module: WIFI Connect
summary: 1 STA 6 AP, count connect AP requires time by scanning the specified channel.
test environment: SSC_T1_SCANSPECIFIED
test point 1: function + performance + stress
test point 2: JAP stress test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: WIFI_CONN_5105
SDK: ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- WiFiStress/WifiJAPCSA
- - test_count = 2
- - ''
- - test_times = 10
- - ''
execution time: 5.0
expected result: 3. connect success 4. PC stay connected
initial condition: None
level: Integration
module: WIFI MAC
steps: |-
1. 1 SSC target connect PC by Uart.
2. SSC target set as softap+sta mode.
3. PC wireless NIC connect softap.
4. sta connect AP ,softap and AP should in different channel
sub module: WIFI Connect
summary: channel switch announcements verify
test environment: SSC_T1_1
test point 1: function + stress
test point 2: channel switch announcements
version: v2 (2016-11-15)
- CI ready: 'No'
ID: WIFI_CONN_5106
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stable
cmd set:
- WiFiStress/WifiConnStable
- - check_count = 1440
- - dummy
- - check_time = 60
- - ''
- - sleep_mode = "NoneSleep"
- - ''
execution time: 24.0
expected result: 3. no disconnected
initial condition: None
level: Integration
module: WIFI MAC
steps: |-
1. set SSC as sta mode and disable sleep function
2. 1 SSC connect with AP
3. check connection status within 24 hours
sub module: WIFI Connect
summary: WiFi STA connection stable test
test environment: SSC_T1_1
test point 1: stress + function
test point 2: connection keep alive stress test
version: v2 (2016-10-23)
- CI ready: 'No'
ID: WIFI_CONN_5107
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stable
cmd set:
- WiFiStress/WifiSendpktSwitchChan
- - test_count = 1000
- - dummy
- - test_time = 20
- - ''
- - send_len = 1000
- - ''
- - send_count = 1000
- - ''
- - send_delay = 20
- - ''
execution time: 24.0
expected result: 4. connect suc
initial condition: None
level: Integration
module: WIFI MAC
steps: |-
1. set SSC as sta mode send UDP broadcast pkt
2. switch SSC send pkt channel
3. SSC stop send pkt
4. SSC connect ap
sub module: WIFI Connect
summary: Switch channel when sending WiFi packets
test environment: SSC_T1_1
test point 1: stress
test point 2: connect ap
version: v2 (2016-10-23)
- CI ready: 'No'
ID: WIFI_CONN_5201
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: IOT
cmd set:
- ''
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- - R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)
execution time: TBD
expected result: |-
1. 配置成功，如有需要就重启路由
2. target 连接AP成功
initial condition: STAM1
level: Integration
module: WIFI MAC
steps: |-
1. 将每个需要测试的AP手动配置为该AP所有可能的模式（bgn），带宽，加密模式的组合
2. 控制 target 连接 AP
sub module: WIFI Connect
summary: basic join ap
test environment: SSC_T1_IOT1
test point 1: interoperability
test point 2: JAP inter operablity test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: WIFI_CONN_5202
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: IOT
cmd set:
- ''
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- - R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)
- - DELAY 60
- - P PC_COM C +DELAYDONE
- P SSC1 NC +JAP:DISCONNECTED
execution time: TBD
expected result: |-
1. 配置成功，如有需要就重启路由
2. target 连接AP成功
3. target 没有从AP断开
initial condition: STAM1
level: Integration
module: WIFI MAC
steps: |-
1. 将每个需要测试的AP手动配置为该AP所有可能的模式（bgn），带宽，加密模式的组合
2. 控制 target 连接 AP
3. 等待60s
sub module: WIFI Connect
summary: join ap not disconnected in 60 seconds
test environment: SSC_T1_IOT1
test point 1: interoperability
test point 2: JAP inter operablity test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: WIFI_CONN_5203
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'No'
category: IOT
cmd set: ''
execution time: TBD
expected result: |-
1. 配置成功，如有需要就重启路由
2. 开始连接AP
3. target 最终连接AP成功
4. target 从 AP 断开
5. target 重连AP成功
initial condition: STAM1
level: Integration
module: WIFI MAC
steps: |-
1. 将每个需要测试的AP手动配置为该AP所有可能的模式（bgn），带宽，加密模式的组合
2. 控制 target 连接 AP
3. 快速在连接AP过程中对AP断电上电
4. AP断电后再上电
5. 等待 target 重连 AP
sub module: WIFI Connect
summary: power off and power on AP during JAP， reconnect after AP power off and
power on
test environment: SSC_T1_IOT1
test point 1: interoperability
test point 2: JAP inter operablity test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: WIFI_CONN_5301
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'No'
category: IOT
cmd set: ''
execution time: TBD
expected result: 3. get test result form smart phone APK
initial condition: None
level: Integration
module: WIFI MAC
steps: |-
1. setup a few SoftAP with different configs (special character in ssid/passwd, differnt auth type)
2. install and config APK on all smart phones
3. use APK to test WiFi connect
sub module: WIFI Connect
summary: connect to softap IOT test
test environment: SSC_T5_IOT1
test point 1: interoperability
test point 2: Connect to SoftAP inter operablity test
version: v1 (2016-10-18)
- CI ready: 'No'
ID: WIFI_CONN_9901
SDK: All
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Performance
cmd set:
- WiFiStress/WifiJAPCompatibility
- - test_count = 10
- - ''
- - retry_count = 1
- - ''
execution time: 1
expected result: 1. set succeed 2. disconnect succeed 3. connect succeed
initial condition: STAM1
level: Integration
module: WIFI MAC
steps: 1. set sta mode 2. disconnect sta 3. sta connect ap
sub module: WIFI Connect
summary: STA connect to AP compatibility test
test environment: SSC_T1_IOT1
test point 1: Compatibility Test test point
test point 2: WIFI compatibility test
version: v1 (2016-10-23)
- CI ready: 'No'
ID: WIFI_CONN_0704
SDK: All
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 sta -C -s <wep_ap_ssid> -p <wep_ap_password>
- - R SSC1 C +JAP:OK
- R SSC1 NC +JAPAUTHCHANGED C +JAP:CONNECTED
execution time: 0
expected result: 1. sta connect ap suc and no +JAPAUTHCHANGED found
initial condition: STAM1
level: Integration
module: WIFI MAC
steps: 1. sta JAP
sub module: WIFI Connect
summary: sta connect wep encrypt ap
test environment: SSC_T1_WEP
test point 1: basic function
test point 2: ap connect test
version: v1 (2016-10-23)
- CI ready: 'No'
ID: WIFI_CONN_9902
SDK: All
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Performance
cmd set:
- WiFiStress/WifiStaConnectionHolder
- - test_count = 10
- - ''
- - retry_count = 1
- - ''
execution time: 1
expected result: |-
1. set SSC1 AP+STA mode, SSC2 AP mode, SSC3 STA mode
2. SSC3 connect SSC1
3. SSC2 random set ap channel
4. SSC1 connect SSC2
initial condition: T3_1
level: Integration
module: WIFI MAC
steps: |-
1. set mode suc
2. connect suc
3. set channel suc
4. connect suc
sub module: WIFI Connect
summary: STA keep connected with AP stable test
test environment: SSC_T3_1
test point 1: AP switch channel dut Connection holder Test test point
test point 2: WIFI Connection holder test
version: v1 (2016-10-23)
Reference in New Issue View Git Blame Copy Permalink