esp-idf/components/idf_test/integration_test/TC_IT_WIFI_CONN.yml

test cases:
- CI ready: 'Yes'
  ID: WIFI_CONN_0101
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 ap -S -s <target_ssid> -t 0
    - - R SSC1 C +SAP:OK
  - - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
    - - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
  - - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t 2
    - - R SSC1 C +SAP:OK
  - - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
    - - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
  - - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
    - - R SSC1 C +SAP:OK
  - - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
    - - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
  - - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t 4
    - - R SSC1 C +SAP:OK
  - - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
    - - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
  - - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t 1
    - - R SSC1 C +SAP:OK
  - - SSC SSC2 sta -S
    - - R SSC2 RE "\+SCAN:%%s,.+,0,\d+"%%(<target_ssid>) C +SCANDONE
  - - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t 5
    - - R SSC1 C +SAP:OK
  - - SSC SSC2 sta -S
    - - R SSC2 RE "\+SCAN:%%s,.+,0,\d+"%%(<target_ssid>) C +SCANDONE
  execution time: 0.0
  expected result: "1.target1 set AP,open, \n2.target 2 jap succeed\n3.target1 set
    AP,wpa_psk \n4.target 2 jap succeed\n5.target1 set AP, wpa2_psk \n6.target 2 jap
    succeed\n7.target1 set AP,wap_wpa2_psk\n8.target 2 jap succeed\n9.target1 set
    AP,加密方式为t 1\n10.target 2 上查询到target_ssid\n11.target1 set AP,加密方式为t 5\n12.target
    2 上查询到target_ssid"
  initial condition: T2_1
  level: Integration
  module: WIFI MAC
  steps: "1.target1下设置ssid 和pwd,加密方式 open\n2.target2 jap target1\n3.target1下设置ssid
    和pwd,加密方式 wpa_psk \n4.target2 jap target1\n5.target1下设置ssid 和pwd,加密方式 wpa2_psk
    \n6.target 2 jap target1\n7.target1下设置ssid 和pwd,加密方式 wap_wpa2_psk\n8.target2 jap
    target1\n9.target1下设置ssid 和pwd,加密方式 wep \n10.target2上查询target_ssid\n11.target1下设置ssid
    和pwd,加密方式 t 5 错误的加密方式\n12.target2上查询 target_ssid"
  sub module: WIFI Connect
  summary: station SAP+JAP test, different encryption
  test environment: SSC_T2_5
  test point 1: basic function
  test point 2: SAP/JAP with different config
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_0102
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 ap -S -s <target_ssid> -t 0 -n 1
    - - R SSC1 C +SAP:OK
  - - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
    - - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
  - - SSC SSC1 ap -S -s <target_ssid> -t 0 -n 13
    - - R SSC1 C +SAP:OK
  - - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
    - - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
  - - SSC SSC1 ap -S -s <target_ssid> -n 15
    - - R SSC1 C +SAP:OK
  - - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
    - - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
  - - SSC SSC2 sta -S
    - - R SSC2 RE "\+SCAN:%%s,.+,\d+,1"%%(<target_ssid>)
  execution time: 0.0
  expected result: |-
    1. target1 set AP,set channel 1
    2.target 2 jap succeed
    3.target1 set AP,set channel 10
    4.target 2 jap succeed
    5.target1 set AP,set channel 15
    6.target 2 上查询到target_ssid
  initial condition: T2O_1
  level: Integration
  module: WIFI MAC
  steps: |-
    1. target1下设置ssid 和pwd 加密方式,set channel 1
    2.target2 jap target 1
    3.target1下设置ssid 和pwd 加密方式,set channel 10
    4.target2 jap target 1
    5.target1下设置ssid 和pwd 加密方式,set channel 15
    6.target 2 上查询target_ssid
  sub module: WIFI Connect
  summary: station SAP+JAP test, different channel
  test environment: SSC_T2_5
  test point 1: basic function
  test point 2: SAP/JAP with different config
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_0103
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum> -h
      0
    - - R SSC1 C +SAP:OK
  - - SSC SSC2 sta -S -h 0
    - - R SSC2 P <target_ap_mac>
      - R SSC2 C +SCANDONE
  - - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum> -h
      1
    - - R SSC1 C +SAP:OK
  - - DELAY 3
    - - ''
  - - SSC SSC2 sta -S -h 0
    - - R SSC2 C +SCANDONE
  - - DELAY 3
    - - ''
  - - SSC SSC2 sta -S -h 0
    - - R SSC2 NP <target_ap_mac> C +SCANDONE
  execution time: 0.0
  expected result: |-
    1.target1 set AP,set ssid broad cast
    2.target 2上scan target_ap_mac
    3.target1 set AP,set ssid hidden,
    4.target 2上不能scan target_ap_mac
  initial condition: T2_1
  level: Integration
  module: WIFI MAC
  steps: |-
    1. target1下设置ssid 和pwd 加密方式,set ssid broad cast
    2.target 2上scan target_ap_mac
    3. target1下设置ssid 和pwd 加密方式,set ssid hidden,
    4.target 2上scan target_ap_mac
  sub module: WIFI Connect
  summary: station SAP+JAP test, ssid hidden
  test environment: SSC_T2_5
  test point 1: basic function
  test point 2: SAP/JAP with different config
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_0104
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  allow fail: '1/2'
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum> -m
      1
    - - R SSC1 C +SAP:OK
  - - WIFI <pc_wifi_nic> DISCONN
    - - R PC_COM C +WIFIDISCONN:OK
  - - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
    - - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
  - - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
      <target_encryption>
    - - R PC_COM C +WIFICONN:ERROR
  execution time: 0.0
  expected result: |-
    1. target1 set AP,set max allowed sta as 1
    2. use PC disconnect,
    3.target 2 jap succeed
    4.PC WIFI can not CONN
  initial condition: T2_1
  level: Integration
  module: WIFI MAC
  steps: |-
    1.target1下设置ssid 和pwd 加密方式,set max allowed sta as 1
    2.use PC disconnect target1
    3.target 2 jap target1
    4.PC WIFI CONNECT target1
  sub module: WIFI Connect
  summary: station SAP test, max allowed sta
  test environment: SSC_T2_2
  test point 1: basic function
  test point 2: SAP/JAP with different config
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_0201
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
    - - R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)
  - - SSC SSC1 sta -Q
    - - R SSC1 RE "\+JAP:CONNECTED,%%s,%%s"%%(<ap_mac>,<ap_ssid>)
  - - SSC SSC1 sta -D
    - - R SSC1 C +QAP:OK
  - - SSC SSC1 sta -Q
    - - R SSC1 C +JAP:DISCONNECTED
  execution time: 0.0
  expected result: |-
    1.target1 jion AP 成功
    2.查询JAP的状态
    3.target1 断开AP
    4.查询target1 JAP 是DISCONN
  initial condition: STAM1
  level: Integration
  module: WIFI MAC
  steps: |-
    1.target1 jion AP 成功
    2.查询JAP的状态
    3.target1 断开AP
    4.查询target1 JAP 是DISCONN
  sub module: WIFI Connect
  summary: JAP query test
  test environment: SSC_T1_5
  test point 1: basic function
  test point 2: query JAP status
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_0301
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum> -h
      0 -m 8
    - - R SSC1 C +SAP:OK
  - - SSC SSC1 ap -Q
    - - R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,3,0,8,\d+"%%(<target_ssid>,<target_password>)
  execution time: 0.0
  expected result: |
    1. target1 set AP
    2.target 1上查询到跟设置AP时一致
  initial condition: APM1
  level: Integration
  module: WIFI MAC
  steps: |
    1. target1 set AP
    2.target 1上查询到跟设置AP时一致
  sub module: WIFI Connect
  summary: AP config query test
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: query AP config
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_0302
  SDK: |-
    8266_NonOS
    8266_RTOS
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 sta -S
    - - R SSC1 C +SCAN_DONE:OK
  - - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
    - - P SSC1 C +JAP:CONNECTED
      - P SSC1 C +SCANDONE
  - - SSC SSC1 sta -D
    - - R SSC1 C +QAP:OK
  - - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
    - - ''
  - - SSC SSC1 sta -S
    - - P SSC1 C +JAP:CONNECTED
      - P SSC1 C +SCANDONE
  execution time: 0.0
  expected result: |
    2. scan succeed, JAP succeed
    5. JAP succeed, scan succeed
  initial condition: STAM1
  level: Integration
  module: WIFI MAC
  steps: |
    1. target 1 STA join AP
    2. target 1 STA scan before JAP succeed
    3. target 1 quite AP
    4. target 1 scan
    5. target 1 JAP before scan succeed
  sub module: WIFI Connect
  summary: JAP during scan
  test environment: SSC_T1_5
  test point 1: interaction
  test point 2: Conn interact with other WiFi operation
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_0302
  SDK: |-
    ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 sta -S
    - - R SSC1 C +SCAN_DONE:OK
  - - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
    - - P SSC1 C +JAP:CONNECTED
      - P SSC1 C +SCANFAIL
  - - SSC SSC1 sta -D
    - - R SSC1 C +QAP:OK
  - - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
    - - ''
  - - SSC SSC1 sta -S
    - - P SSC1 C +JAP:CONNECTED
      - P SSC1 C +SCAN:ERROR
  execution time: 0.0
  expected result: |
    2. scan failed, JAP succeed
    5. JAP succeed, scan failed
  initial condition: STAM1
  level: Integration
  module: WIFI MAC
  steps: |
    1. target 1 STA join AP
    2. target 1 STA scan before JAP succeed
    3. target 1 quite AP
    4. target 1 scan
    5. target 1 JAP before scan succeed
  sub module: WIFI Connect
  summary: JAP during scan
  test environment: SSC_T1_5
  test point 1: interaction
  test point 2: Conn interact with other WiFi operation
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_0401
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 sta -R -a 0
    - - R SSC1 C +AUTORECONN:OK
  - - SSC SSC1 sta -R -a 2
    - - R SSC1 C +AUTORECONN:0
  - - SSC SSC1 reboot
    - - ''
  - - DELAY 15
    - - ''
  - - SSC SSC1 sta -Q
    - - R SSC1 C JAP:DISCONNECTED
  - - SSC SSC1 sta -R -a 1
    - - R SSC1 C +AUTORECONN:OK
  - - SSC SSC1 sta -R -a 2
    - - R SSC1 C +AUTORECONN:1
  - - SSC SSC1 reboot
    - - R SSC1 C +JAP:CONNECTED
  execution time: 0.0
  expected result: |-
    1.设置autoreconn,关闭
    2.查询当前autoreconn状态是否关闭
    3.重启系统，等待15s
    4.查询target1 未自动重连AP
    5.设置autoreconn,开启
    6.查询当前autoreconn状态是否开启
    7.系统重启后target1 自动重连AP
  initial condition: STAM2
  level: Integration
  module: WIFI MAC
  steps: |-
    1.设置autoreconn,关闭
    2.查询当前autoreconn状态是否关闭
    3.重启系统，等待15s
    4.查询target1 未自动重连AP
    5.设置autoreconn,开启
    6.查询当前autoreconn状态是否开启
    7.系统重启后target1 自动重连AP
  sub module: WIFI Connect
  summary: auto reconnect test
  test environment: SSC_T1_5
  test point 1: basic function
  test point 2: power on auto reconnect test
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_0501
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC2 sta -R -r 1
    - - R SSC2 C +RECONN:OK
  - - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
    - - R SSC1 C +SAP:OK
  - - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
    - - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
  - - SSC SSC1 op -S -o 1
    - - R SSC1 C +MODE:OK
  - - DELAY 10
    - - ''
  - - SSC SSC1 op -S -o 2
    - - R SSC1 C +MODE:OK
  - - DELAY 15
    - - R SSC2 C +JAP:CONNECTED
  - - SSC SSC2 sta -R -r 0
    - - R SSC2 C +RECONN:OK
  - - SSC SSC2 sta -R -r 2
    - - R SSC2 C +RECONN:0
  - - SSC SSC1 op -S -o 1
    - - R SSC1 C +MODE:OK
  - - DELAY 10
    - - ''
  - - SSC SSC1 op -S -o 2
    - - R SSC1 C +MODE:OK
  - - DELAY 15
    - - P PC_COM C +DELAYDONE
      - P SSC2 NC +JAP:CONNECTED
  - - SSC SSC2 sta -R -r 1
    - - R SSC2 C +RECONN:OK
  execution time: 0.0
  expected result: |-
    1.设置reconn,开启（此功能不需要重启系统）
    2.target1 set AP
    3.target2 JAP target1 成功
    4.target2 断开target1 连接
    5.等待10s，target2 自动重连target1
    6.成功
    7.查询reconn状态，关闭
    8.修改mode 成功
    9.等待15s，target2 不会自动重连target1
  initial condition: T2_1
  level: Integration
  module: WIFI MAC
  steps: "1.设置reconn,开启（此功能不需要重启系统）\n2.target1下设置ssid 和pwd 加密方式\n3.target2 JAP target1
    \n4.target1 修改mode 为sta mode\n5.等待10s，target1 修改mode 为softAP mode\n6.设置reconn，关闭\n7.查询reconn状态，关闭\n8.target1
    修改mode 为sta mode\n9.等待15s，target1 修改mode 为softAP mode"
  sub module: WIFI Connect
  summary: reconnect policy test
  test environment: SSC_T2_5
  test point 1: basic function
  test point 2: reconnect policy test
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_0502
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
    - - R SSC1 C +SAP:OK
  - - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
    - - R SSC2 C +JAP:CONNECTED
  - - SSC SSC2 sta -R -r 1
    - - R SSC2 C +RECONN:OK
  - - SSC SSC1 op -S -o 1
    - - R SSC1 C +MODE:OK
  - - DELAY 5
    - - R SSC2 C +JAP:DISCONNECTED
  - - SSC SSC1 op -S -o 2
    - - R SSC1 C +MODE:OK
  - - DELAY 10
    - - R SSC2 C +JAP:CONNECTED
  - - SSC SSC2 sta -D
    - - R SSC2 C +QAP:OK
  - - DELAY 10
    - - P PC_COM C +DELAYDONE
      - P SSC2 NC +JAP:CONNECTED
  execution time: 0.0
  expected result: |-
    1.target1 set AP
    2.target2 jap target 1
    3.设置reconn,开启（此功能不需要重启系统）
    4.target2 断开target1 连接
    5.等待10s，target2 自动重连target1
    6.target2 断开target1 连接
  initial condition: T2_1
  level: Integration
  module: WIFI MAC
  steps: |-
    1.target1下设置ssid 和pwd 加密方式
    2.target2 jap target 1
    3.设置reconn,开启（此功能不需要重启系统）
    4.target2 断开target1 连接
    5.等待10s，target2 自动重连target1
    6.target2 断开target1 连接
  sub module: WIFI Connect
  summary: will not do reconnect after manually disconnected
  test environment: SSC_T2_5
  test point 1: abnormal/special use
  test point 2: reconnect policy test
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_0503
  SDK: |-
    8266_NonOS
    8266_RTOS
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 sta -R -r 0
    - - R SSC1 C OK
  - - SSC SSC1 sta -C -s <random_string> -p <random_string>
    - - R SSC1 C +JAP:OK
      - R SSC1 NC +JAP:DISCONNECTED,1 C +JAP:DISCONNECTED,3
  - - DELAY 5
    - - R SSC1 NC +JAP:DISCONNECTED
      - P PC_COM C +DELAYDONE
  - - SSC SSC1 sta -C -s <ap_ssid> -p <random_string>
    - - R SSC1 C +JAP:OK
      - R SSC1 NC +JAP:DISCONNECTED,1 C +JAP:DISCONNECTED,2
  - - DELAY 5
    - - R SSC1 NC +JAP:DISCONNECTED
      - P PC_COM C +DELAYDONE
  - - SSC SSC1 sta -R -r 1
    - - SSC SSC1 C OK
  execution time: 0.0
  expected result: |-
    1. succeed
    2. not reconnect when connect failed, status when recv disconnect event is correct
    3. not reconnect when connect failed, status when recv disconnect event is correct
    4. succeed
  initial condition: STAM1
  level: Integration
  module: WIFI MAC
  steps: |
    1. set sta reconnect policy as not reconnect
    2. sta connect to ap not exist
    3. sta connect to ap with wrong password
    4. reset sta reconnect policy as auto reconnect
  sub module: WIFI Connect
  summary: reconnect policy interact with failed STA connect/reconnect
  test environment: SSC_T1_1
  test point 1: basic function
  test point 2: reconnect policy test
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_0601
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
    - - R SSC1 C +SAP:OK
  - - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
      <target_encryption>
    - - R PC_COM C +WIFICONN:OK
  - - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
    - - R SSC2 C +JAP:CONNECTED
  - - SSC SSC1 ap -L
    - - 'R SSC1 C +LSTA:'
      - 'R SSC1 C +LSTA:'
      - R SSC1 C +LSTADONE
  execution time: 0.0
  expected result: |-
    1.target1 set AP
    2.PC WIFI CONNECTED
    3.target2 jap target 1
    4.查询到两个sta 连接到target1 上
  initial condition: T2_1
  level: Integration
  module: WIFI MAC
  steps: |-
    1. target1下设置ssid 和pwd 加密方式
    2.PC WIFI CONNECTED target1
    3.target2 jap target 1
    4.查询到两个sta 连接到target1 上
  sub module: WIFI Connect
  summary: list stations connected to soft ap test
  test environment: SSC_T2_2
  test point 1: basic function
  test point 2: list SoftAP connected station
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_0701
  SDK: |-
    8266_NonOS
    8266_RTOS
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 sta -D
    - - R SSC1 C QAP
  - - SSC SSC1 sta -Q
    - - R SSC1 C +STA_STATUS:0
  - - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
    - - R SSC1 C +JAP:OK
  - - SSC SSC1 sta -Q
    - - R SSC1 C +STA_STATUS:1
      - R SSC1 C +JAP:CONNECTED
  - - SSC SSC1 sta -Q
    - - R SSC1 C +STA_STATUS:5
  - - APC <APC1> OFF <ap_apc>
    - - P PC_COM L OK
      - P SSC1 C bcn_timout
  - - SSC SSC1 sta -Q
    - - R SSC1 C +STA_STATUS:4
  - - APC <APC1> ON <ap_apc>
    - - P PC_COM L OK
  execution time: 0.0
  expected result: |-
    1. idle state
    2. connecting state
    3. got IP state
    4. connect fail state
  initial condition: STAM1
  level: Integration
  module: WIFI MAC
  steps: |-
    1. sta disconnected, query status
    2. sta connect to AP, query status
    3. got IP, query status
    4. AP power off, query status when beacon timeout
  sub module: WIFI Connect
  summary: check wifi status idle, connecting, got ip and connect fail
  test environment: SSC_T1_APC
  test point 1: basic function
  test point 2: wifi connect status check
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_0702
  SDK: |-
    8266_NonOS
    8266_RTOS
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 sta -C -s <random_string> -p <random_string>
    - - R SSC1 C +JAP:OK
      - R SSC1 C +JAP:DISCONNECTED,3
  - - SSC SSC1 sta -C -s <ap_ssid> -p <random_string>
    - - R SSC1 C +JAP:OK
      - R SSC1 C +JAP:DISCONNECTED,2
  execution time: 0.0
  expected result: |-
    1. get status AP not exist in disconnect event
    2. get status wrong password in disconnect event
  initial condition: STAM1
  level: Integration
  module: WIFI MAC
  steps: |
    1. sta connect to ap not exist
    2. sta connect to ap with wrong password
  sub module: WIFI Connect
  summary: check wifi status wrong password, no ap found
  test environment: SSC_T1_1
  test point 1: basic function
  test point 2: wifi connect status check
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_0703
  SDK: |-
    8266_NonOS
    8266_RTOS
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 sta -C -s <wep_ap_ssid> -p bacfd
    - - R SSC1 C +JAP:DISCONNECTED,4,2
  execution time: 0.0
  expected result: 1. connect status connect fail in disconnect evnet
  initial condition: STAM1
  level: Integration
  module: WIFI MAC
  steps: 1. connect WEP ap with error password (valid wep password)
  sub module: WIFI Connect
  summary: check wifi status connect fail
  test environment: SSC_T1_WEP
  test point 1: basic function
  test point 2: wifi connect status check
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_0801
  SDK: |-
    8266_NonOS
    8266_RTOS
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 0
    - - R SSC1 C +SAP:OK
  - - SSC SSC2 sta -C -s <random_string> -p <random_string>
    - - R SSC2 C +JAP:CONNECTED
  - - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 2
    - - P SSC1 C +SAP:OK
      - P SSC2 C +JAP:AUTHCHANGED,2,0
  - - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 3
    - - P SSC1 C +SAP:OK
      - P SSC2 C +JAP:AUTHCHANGED,3,2
  - - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 4
    - - P SSC1 C +SAP:OK
      - P SSC2 C +JAP:AUTHCHANGED,4,3
  - - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 0
    - - P SSC1 C +SAP:OK
      - P SSC2 C +JAP:AUTHCHANGED,0,4
  execution time: 0.0
  expected result: |-
    1. succeed
    2. succeed
    3. auth change event old mode 0 new mode 2
    4. auth change event old mode 2 new mode 3
    5. auth change event old mode 3 new mode 4
    6. auth change event old mode 4 new mode 0
  initial condition: T2_1
  level: Integration
  module: WIFI MAC
  steps: |-
    1. set target1 softap auth mode 0
    2. target2 connect to target1
    3. set target1 softap auth mode 2, wait sta connected
    4. set target1 softap auth mode 3, wait sta connected
    5. set target1 softap auth mode 4, wait sta connected
    6. set target1 softap auth mode 0, wait sta connected
  sub module: WIFI Connect
  summary: test auth change event
  test environment: SSC_T2_5
  test point 1: basic function
  test point 2: wifi auth changed event test
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_0901
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: basic function
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
    - - R SSC1 C +JAP:CONNECTED
  - - SSC SSC1 sta -D
    - - R SSC1 RE JAP:DISCONNECTED,\d+,8
  - - SSC SSC1 sta -C -s <ap_ssid> -p <random_string>
    - - R SSC1 RE JAP:DISCONNECTED,\d+,15
  - - SSC SSC1 sta -C -s <random_string> -p <ap_password>
    - - R SSC1 RE JAP:DISCONNECTED,\d+,201
  execution time: 0.0
  expected result: |-
    1. disconnect event reason REASON_ASSOC_LEAVE
    2. disconnect event reason REASON_4WAY_HANDSHAKE_TIMEOUT
    3. disconnect event reason REASON_NO_AP_FOUND
  initial condition: STAM1
  level: Integration
  module: WIFI MAC
  steps: |-
    1. sta connect to AP, and disconnect
    2. connect to AP with wrong password
    3. connect to AP not exist
  sub module: WIFI Connect
  summary: test wifi disconnect reason REASON_ASSOC_LEAVE, REASON_4WAY_HANDSHAKE_TIMEOUT,
    REASON_NO_AP_FOUND
  test environment: SSC_T1_1
  test point 1: basic function
  test point 2: wifi disconnect reason test
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_0902
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - APC <APC1> OFF <ap_apc>
    - - P PC_COM L OK
      - R SSC1 RE JAP:DISCONNECTED,\d+,200
  - - APC <APC1> ON <ap_apc>
    - - P PC_COM L OK
  execution time: 0.0
  expected result: |-
    1. succeed
    2. disconnect event REASON_BEACON_TIMEOUT
  initial condition: STAM2
  level: Integration
  module: WIFI MAC
  steps: |-
    1. connect to AP
    2. AP power off
  sub module: WIFI Connect
  summary: test wifi disconnect reason REASON_BEACON_TIMEOUT
  test environment: SSC_T1_APC
  test point 1: basic function
  test point 2: wifi disconnect reason test
  version: v1 (2016-8-15)
- CI ready: 'No'
  ID: WIFI_CONN_0903
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  allow fail: '1/2'
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 sta -C -s <wep_ap_ssid> -p bacfd
    - - R SSC1 RE JAP:DISCONNECTED,\d+,2
  execution time: 0.0
  expected result: 1. disconect event reason REASON_AUTH_EXPIRE
  initial condition: STAM1
  level: Integration
  module: WIFI MAC
  steps: 1. connect WEP ap with error password (valid wep password)
  sub module: WIFI Connect
  summary: test wifi disconnect reason REASON_AUTH_EXPIRE
  test environment: SSC_T1_WEP
  test point 1: basic function
  test point 2: wifi disconnect reason test
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_0904
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  allow fail: '2/3'
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 3 -m 1
    - - R SSC1 C +SAP:OK
  - - SSC SSC2 sta -C -s <random_string> -p 1234567890
    - - R SSC2 RE JAP:DISCONNECTED,\d+,204
  - - SSC SSC2 sta -D
    - - R SSC2 C +QAP:OK
  - - WIFI <pc_wifi_nic> CONN <random_string> <random_string> <pc_ip_wifi>
    - - R PC_COM NC ERROR C +WIFICONN:OK
  - - SSC SSC2 sta -C -s <random_string> -p <random_string>
    - - R SSC2 RE JAP:DISCONNECTED,\d+,5
  execution time: 0.0
  expected result: |-
    1. succeed
    2. disconnect event REASON_HANDSHAKE_TIMEOUT
    3. succeed
    4. succeed
    5. disconnect event REASON_ASSOC_TOOMANY
  initial condition: T2_1
  level: Integration
  module: WIFI MAC
  steps: |-
    1. config target1 softap max sta allowed 1
    2. target2 connect to target1 with wrong password
    3. target2 disconnect
    4. PC WIFI NIC connect to target1
    5. target2 connect to target1 with correct password
  sub module: WIFI Connect
  summary: test wifi disconnect reason REASON_ASSOC_TOOMANY, REASON_HANDSHAKE_TIMEOUT
  test environment: SSC_T2_2
  test point 1: basic function
  test point 2: wifi disconnect reason test
  version: v1 (2016-8-15)
- CI ready: 'No'
  ID: WIFI_CONN_1001
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'No'
  category: Function
  cmd set: ''
  execution time: 1.0
  expected result: 4.平均beacon delay时间小于10ms
  initial condition: None
  level: Integration
  module: WIFI MAC
  steps: |-
    1.target设置成AP 模式
    2.PC 端启动wireshark 抓包工具抓取target beacon包
    3.停止抓包将抓取的beacon 包以txt格式导出
    4.利用脚本计算beacon delay时间
  sub module: WIFI Connect
  summary: beacon delay
  test environment: SSC_T1_1
  test point 1: basic function
  test point 2: beacon delay
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_1101
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 ram -Q
    - - R SSC1 A <FREg>:\+FREEHEAP:(\d+)\r\n
  - - SSC SSC1 op -W -a start
    - - R SSC1 C +MODE:OK
  - - SSC SSC1 op -W -a stop
    - - R SSC1 C +MODE:OK
  - - SSC SSC1 ram -Q
    - - R SSC1 P <FREg>
  execution time: 0
  expected result: |
    1. get current heap size
    2.OK
    3.OK
    4.heap size unchanged
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. check heap size
    2. wifi start
    3. wifi stop
    4. check heap size
  sub module: WIFI Connect
  summary: wifi start and stop, heap size unchanged
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: wifi start and stop, heap size unchanged
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1201
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
    - - R SSC1 C +JAP:ERROR
  execution time: 0
  expected result: |
    1. ERROR
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. sta connect
  sub module: WIFI Connect
  summary: sta connect after WiFi stop
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: use WiFi API after WiFi stop
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1202
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 sta -R -a 1
    - - R SSC1 C +AUTORECONN:OK
  - - SSC SSC1 sta -Q
    - - R SSC1 C +JAP:DISCONNECTED
  execution time: 0
  expected result: |
    1. OK
    2. DISCONNECTED
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. sta reconnect start
    2. query sta state
  sub module: WIFI Connect
  summary: sta reconnect start and connect fail after WiFi stop
  test environment: SSC_T1_5
  test point 1: basic function
  test point 2: use WiFi API after WiFi stop
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1203
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 sta -D
    - - R SSC1 C +QAP:ERROR
  execution time: 0
  expected result: |
    1. ERROR
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. sta disconnect
  sub module: WIFI Connect
  summary: station disconnect after WiFi stop
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: use WiFi API after WiFi stop
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1204
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 sta -Q
    - - R SSC1 C +JAP:DISCONNECTED
  execution time: 0
  expected result: |
    1. DISCONNECTED
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. query sta state
  sub module: WIFI Connect
  summary: query sta state after WiFi stop
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: use WiFi API after WiFi stop
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1205
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 sta -S -s <ap_ssid>
    - - R SSC1 C +SCAN:ERROR,1
  execution time: 0
  expected result: |
    1. ERROR
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. sta scan ssid and pwd
  sub module: WIFI Connect
  summary: sta scan after WiFi stop
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: use WiFi API after WiFi stop
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1206
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 ap -C -s <target_ssid> -p <target_password>
    - - R SSC1 C +JAP:ERROR
  execution time: 0
  expected result: |
    1. ERROR
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. ap connect ssid and pwd
  sub module: WIFI Connect
  summary: ap connect after WiFi stop
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: use WiFi API after WiFi stop
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1207
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 ap -D
    - - R SSC1 C +QAP:ERROR
  execution time: 0
  expected result: |
    1. ERROR
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. ap disconnect
  sub module: WIFI Connect
  summary: ap disconnect after WiFi stop
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: use WiFi API after WiFi stop
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1208
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 ap -L
    - - R SSC1 C +LSTADONE
  execution time: 0
  expected result: |
    1. +LSTADONE
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. ap list station
  sub module: WIFI Connect
  summary: ap list station after WiFi stop
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: use WiFi API after WiFi stop
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1209
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 ap -Q
    - - 'R SSC1 C +APCONFIG:'
  execution time: 0
  expected result: |
    1. +APCONFIG:ssid and pwd
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. query ap config
  sub module: WIFI Connect
  summary: query ap config after WiFi stop
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: use WiFi API after WiFi stop
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1210
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 op -S -o 2
    - - R SSC1 C +MODE:OK
  - - SSC SSC1 ap -S -s <target_ssid> -p <target_password>
    - - R SSC1 C +SAP:OK
  - - SSC SSC1 op -S -o 1
    - - R SSC1 C +MODE:OK
  - - SSC SSC1 ap -S -s <target_ssid> -p <target_password>
    - - R SSC1 C +SAP:ERROR
  execution time: 0
  expected result: |
    1. OK
    2. OK
    3. OK
    4. ERROR
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. set ap mode
    2. ap set ssid and pwd
    3. set station mode
    4. ap set ssid and pwd
  sub module: WIFI Connect
  summary: ap set ssid and pwd after WiFi stop
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: use WiFi API after WiFi stop
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1211
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 mac -Q
    - - 'R SSC1 C MAC:'
  execution time: 0
  expected result: |
    1. MAC:
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. query mac
  sub module: WIFI Connect
  summary: query mac after WiFi stop
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: use WiFi API after WiFi stop
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1212
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 op -S -o 2
    - - R SSC1 C +MODE:OK
  - - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
    - - R SSC1 C +MAC:AP,OK
  - - SSC SSC1 mac -S -o 1 -m <target_mac>
    - - R SSC1 C +MAC:STA,ERROR
  execution time: 0
  expected result: |
    1. OK
    2. OK
    3. ERROR
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. set ap mode
    2. set ap mac
    3. set station mac
  sub module: WIFI Connect
  summary: enable AP mode after WiFi stop and set AP mac
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: use WiFi API after WiFi stop
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1213
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 op -S -o 1
    - - R SSC1 C +MODE:OK
  - - SSC SSC1 mac -S -o 1 -m <target_mac>
    - - R SSC1 C +MAC:STA,OK
  - - SSC SSC1 mac -Q -o 1
    - - 'R SSC1 C +STAMAC:'
  execution time: 0
  expected result: |
    1. OK
    2. OK
    3. get station mac
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. set station mode
    2. set station mac
    3. query station mac
  sub module: WIFI Connect
  summary: enable STA mode after WiFi stop and set STA mac
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: use WiFi API after WiFi stop
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1214
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 op -S -o 1
    - - R SSC1 C +MODE:OK
  - - SSC SSC1 mac -S -o 1 -m <target_mac>
    - - R SSC1 C +MAC:STA,OK
  - - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
    - - R SSC1 C +MAC:AP,ERROR
  execution time: 0
  expected result: |
    1. OK
    2. OK
    3. ERROR
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. set station mode
    2. set station mac
    3. set ap mac
  sub module: WIFI Connect
  summary: enable STA mode after WiFi stop and set AP mac
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: use WiFi API after WiFi stop
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1215
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 channel -S -c 13
    - - R SSC1 C +CHANNEL:ERROR
  execution time: 0
  expected result: |
    1. +CHANNEL:ERROR
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. set channel
  sub module: WIFI Connect
  summary: set channel after WiFi stop
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: use WiFi API after WiFi stop
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1216
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 channel -S -c 13
    - - R SSC1 C +CHANNEL:ERROR
  - - SSC SSC1 channel -G
    - - R SSC1 C +CHANNEL
  execution time: 0
  expected result: |
    1. +CHANNEL:ERROR
    2. +CHANNEL
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. set channel
    2. query channel
  sub module: WIFI Connect
  summary: query channel after WiFi stop
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: use WiFi API after WiFi stop
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1217
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 op -Q
    - - R SSC1 C +MODE:OK
  execution time: 0
  expected result: |
    1. +CURMODE:2
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. query current mode
  sub module: WIFI Connect
  summary: be AP mode after WiFi stop
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: use WiFi API after WiFi stop
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1218
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 op -S -o 1
    - - R SSC1 C +MODE:OK
  execution time: 0
  expected result: |
    1. OK
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. set STA mode
  sub module: WIFI Connect
  summary: set STA mode after WiFi stop
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: use WiFi API after WiFi stop
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1219
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 op -S -o 2
    - - R SSC1 C +MODE:OK
  execution time: 0
  expected result: |
    1. OK
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. set AP mode
  sub module: WIFI Connect
  summary: set ap mode after WiFi stop
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: use WiFi API after WiFi stop
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1301
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 op -W -a init
    - - R SSC1 C +MODE:OK
  - - SSC SSC1 op -W -a start
    - - R SSC1 C +MODE:OK
  - - SSC SSC1 op -W -a deinit
    - - R SSC1 C +MODE:ERROR
  - - SSC SSC1 op -W -a stop
    - - R SSC1 C +MODE:OK
  execution time: 0
  expected result: |
    1. OK
    2. OK
    3. ERROR
    4. OK
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. wifi init
    2. wifi start
    3. wifi deinit
    4. wifi stop
  sub module: WIFI Connect
  summary: incorrect deinit stop flow
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: WiFi deinit and stop
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1302
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 op -W -a init
    - - R SSC1 C +MODE:OK
  - - SSC SSC1 op -W -a deinit
    - - R SSC1 C +MODE:OK
  - - SSC SSC1 op -W -a start
    - - R SSC1 C +MODE:ERROR
  - - SSC SSC1 op -W -a stop
    - - R SSC1 C +MODE:ERROR
  execution time: 0
  expected result: |
    1. OK
    2. OK
    3. ERROR
    4. ERROR
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. wifi init
    2. wifi deinit
    3. wifi start
    4. wifi stop
  sub module: WIFI Connect
  summary: incorrect deinit start flow
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: WiFi deinit and start
  version: v1 (2016-12-31)
- CI ready: 'Yes'
  ID: WIFI_CONN_1303
  SDK: ESP32_IDF
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 op -W -a init
    - - R SSC1 C +MODE:OK
  - - SSC SSC1 op -W -a init
    - - R SSC1 C +MODE:OK
  - - SSC SSC1 op -W -a start
    - - R SSC1 C +MODE:OK
  - - SSC SSC1 op -W -a deinit
    - - R SSC1 C +MODE:ERROR
  - - SSC SSC1 op -W -a deinit
    - - R SSC1 C +MODE:ERROR
  - - SSC SSC1 op -W -a stop
    - - R SSC1 C +MODE:OK
  - - SSC SSC1 op -W -a deinit
    - - R SSC1 C +MODE:OK
  - - SSC SSC1 op -W -a start
    - - R SSC1 C +MODE:ERROR
  execution time: 0
  expected result: |
    1. OK
    2. OK
    3. OK
    4. ERROR
    5. ERROR
    6. OK
    7. OK
    8. ERROR
  initial condition: WIFISTO
  level: Integration
  module: WIFI MAC
  steps: |
    1. wifi init
    2. wifi init
    3. wifi start
    4. wifi deinit
    5. wifi deinit
    6. wifi stop
    7. wifi deinit
    8. wifi start
  sub module: WIFI Connect
  summary: incorrect init start flow
  test environment: SSC_T1_4
  test point 1: basic function
  test point 2: WiFi deinit and stop
  version: v1 (2016-12-31)
- CI ready: 'No'
  ID: WIFI_CONN_5001
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  auto test: 'Yes'
  category: Stress
  cmd set:
  - WiFiStress/WifiJAP
  - - target_ap_num = 10
    - - '["TENDA123456", 11, "1234567890", 10, 10, 3, 2]'
  - - test_count = 500
    - - '["not_pig_head", 12, "", 0, 10, 0, 3]'
  - - join_test_method = ["Normal", "OFF_ON"]
    - - '["MW300R_T", 8, "12345", 5, 9, 0, 5]'
  - - join_delay = [[0, 4], [0, 5]]
    - - '["AC750", 5, "1234567890", 10, 1, 0, 8]'
  - - step_config = [0x0B, 0x07, 0x02]
    - - '["AUF", 3, "1234567890", 10, 9, 0, 1]'
  - - reconnect_test_method = ["OFF_ON"]
    - - ''
  - - reconnect_delay = [[0, 10], [2, 10]]
    - - ''
  execution time: 5.0
  expected result: |-
    1. SAP succeed
    2. JAP succeed
    3. reconnect succeed
  initial condition: None
  level: Integration
  module: WIFI MAC
  steps: |-
    1. random generate test parameter (ssid, password, auth type, ssid hidden/broadcast), SAP and JAP
    2. power off AP during JAP, power on AP
    3. power off AP after JAP succeed, power on AP
    Loop step 1-3
  sub module: WIFI Connect
  summary: 使用各种可能的 ssid+password+auth type 组合进行SAP和JAP；JAP过程中AP随机断电或更改设置；AP随机断电后重连
  test environment: SSC_T2_JAP
  test point 1: function + performance + stress
  test point 2: JAP stress test
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_5101
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  auto test: 'Yes'
  category: Stress
  cmd set:
  - WiFiStress/SoftAPNSTA
  - - sta_num = 4
    - - dummy
  - - max_sta = 4
    - - ''
  - - test_time = 300
    - - ''
  - - delay1 = [0, 1]
    - - ''
  - - delay2 = [0, 1]
    - - ''
  - - change_mac = True
    - - ''
  - - channel = 1
    - - ''
  execution time: 5.0
  expected result: |-
    1. succeed
    2. JAP succeed
  initial condition: None
  level: Integration
  module: WIFI MAC
  steps: |-
    1. 1 target set to softap mode and rest set to sta mode
    2. all sta random join and disconnect from softap
    Loop step 2
  sub module: WIFI Connect
  summary: max sta connect to SotfAP and disconnect
  test environment: SSC_T5_1
  test point 1: stress
  test point 2: SoftAP WIFI connect/disconnect stress test
  version: v2 (2016-11-15)
- CI ready: 'No'
  ID: WIFI_CONN_5102
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  auto test: 'Yes'
  category: Stress
  cmd set:
  - WiFiStress/WifiJAPAtt
  - - test_count = 5
    - - dummy
  execution time: 5.0
  expected result: |-
    2. Scan succeed with RSSI > -90
    3. Join succeed with RSSI > -90
  initial condition: STAM1
  level: Integration
  module: WIFI MAC
  steps: |-
    1. config attenuator (0-59)
    2. scan AP to get AP RSSI
    3. try to join AP
    Loop step 1 - 3
  sub module: WIFI Connect
  summary: connect AP with rssi from -50 to -100
  test environment: SSC_T1_ShieldBox
  test point 1: stress
  test point 2: JAP with different RSSI
  version: v1 (2016-8-15)
- CI ready: 'No'
  ID: WIFI_CONN_5103
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  auto test: 'Yes'
  category: Stress
  cmd set:
  - WiFiStress/WifiJAPAtt
  - - test_count = 5
    - - dummy
  - - att_test_list = range(30, 50)
    - - ''
  execution time: 5.0
  expected result: |-
    2. Scan succeed with RSSI > -90
    3. Join succeed with RSSI > -90
  initial condition: STAM1
  level: Integration
  module: WIFI MAC
  steps: |-
    1. config attenuator (30-59)
    2. scan AP to get AP RSSI
    3. try to join AP
    Loop step 1 - 3
  sub module: WIFI Connect
  summary: connect AP with rssi from -80 to -100
  test environment: SSC_T1_ShieldBox
  test point 1: stress
  test point 2: JAP with different RSSI
  version: v1 (2016-8-15)
- CI ready: 'No'
  ID: WIFI_CONN_5104
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  auto test: 'Yes'
  category: Stress
  cmd set:
  - WiFiStress/WifiJAPScanSpecified
  - - target_ap_num = 6
    - []
  - - test_count = 50
    - []
  - - test_times = 2
    - []
  execution time: 5.0
  expected result: |-
    1. JAP succeed
    2. reconnect succeed and connection time less than 1.5s
    3. connect succeed, and connection time less than 1.5s
  initial condition: None
  level: Integration
  module: WIFI MAC
  steps: 1. SSC target connect the first five AP, first 5 AP which will be stored
    to connected AP cached of DUT. 2. SSC target reconnect ap. 3. SSC target connect
    the last AP, last AP will not be stored in AP cache and DUT do not know the channel
    of this AP. Loop step 1-3
  sub module: WIFI Connect
  summary: 1 STA 6 AP, count connect AP requires time by scanning the specified channel.
  test environment: SSC_T1_SCANSPECIFIED
  test point 1: function + performance + stress
  test point 2: JAP stress test
  version: v1 (2016-8-15)
- CI ready: 'Yes'
  ID: WIFI_CONN_5105
  SDK: ESP32_IDF
  Test App: SSC
  auto test: 'Yes'
  category: Stress
  cmd set:
  - WiFiStress/WifiJAPCSA
  - - test_count = 2
    - - ''
  - - test_times = 10
    - - ''
  execution time: 5.0
  expected result: 3. connect success 4. PC stay connected
  initial condition: None
  level: Integration
  module: WIFI MAC
  steps: |-
    1. 1 SSC target connect PC by Uart.
    2. SSC target set as softap+sta mode.
    3. PC wireless NIC connect softap.
    4. sta connect AP ,softap and AP should in different channel
  sub module: WIFI Connect
  summary: channel switch announcements verify
  test environment: SSC_T1_1
  test point 1: function + stress
  test point 2: channel switch announcements
  version: v2 (2016-11-15)
- CI ready: 'No'
  ID: WIFI_CONN_5106
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  auto test: 'Yes'
  category: Stable
  cmd set:
  - WiFiStress/WifiConnStable
  - - check_count = 1440
    - - dummy
  - - check_time = 60
    - - ''
  - - sleep_mode = "NoneSleep"
    - - ''
  execution time: 24.0
  expected result: 3. no disconnected
  initial condition: None
  level: Integration
  module: WIFI MAC
  steps: |-
    1. set SSC as sta mode and disable sleep function
    2. 1 SSC connect with AP
    3. check connection status within 24 hours
  sub module: WIFI Connect
  summary: WiFi STA connection stable test
  test environment: SSC_T1_1
  test point 1: stress + function
  test point 2: connection keep alive stress test
  version: v2 (2016-10-23)
- CI ready: 'No'
  ID: WIFI_CONN_5107
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  auto test: 'Yes'
  category: Stable
  cmd set:
  - WiFiStress/WifiSendpktSwitchChan
  - - test_count = 1000
    - - dummy
  - - test_time = 20
    - - ''
  - - send_len = 1000
    - - ''
  - - send_count = 1000
    - - ''
  - - send_delay = 20
    - - ''
  execution time: 24.0
  expected result: 4. connect suc
  initial condition: None
  level: Integration
  module: WIFI MAC
  steps: |-
    1. set SSC as sta mode send UDP broadcast pkt
    2. switch SSC send pkt channel
    3. SSC stop send pkt
    4. SSC connect ap
  sub module: WIFI Connect
  summary: Switch channel when sending WiFi packets
  test environment: SSC_T1_1
  test point 1: stress
  test point 2: connect ap
  version: v2 (2016-10-23)
- CI ready: 'No'
  ID: WIFI_CONN_5201
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  auto test: 'Yes'
  category: IOT
  cmd set:
  - ''
  - - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
    - - R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)
  execution time: TBD
  expected result: |-
    1. 配置成功，如有需要就重启路由
    2. target 连接AP成功
  initial condition: STAM1
  level: Integration
  module: WIFI MAC
  steps: |-
    1. 将每个需要测试的AP手动配置为该AP所有可能的模式（bgn），带宽，加密模式的组合
    2. 控制 target 连接 AP
  sub module: WIFI Connect
  summary: basic join ap
  test environment: SSC_T1_IOT1
  test point 1: interoperability
  test point 2: JAP inter operablity test
  version: v1 (2016-8-15)
- CI ready: 'No'
  ID: WIFI_CONN_5202
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  auto test: 'Yes'
  category: IOT
  cmd set:
  - ''
  - - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
    - - R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)
  - - DELAY 60
    - - P PC_COM C +DELAYDONE
      - P SSC1 NC +JAP:DISCONNECTED
  execution time: TBD
  expected result: |-
    1. 配置成功，如有需要就重启路由
    2. target 连接AP成功
    3. target 没有从AP断开
  initial condition: STAM1
  level: Integration
  module: WIFI MAC
  steps: |-
    1. 将每个需要测试的AP手动配置为该AP所有可能的模式（bgn），带宽，加密模式的组合
    2. 控制 target 连接 AP
    3. 等待60s
  sub module: WIFI Connect
  summary: join ap not disconnected in 60 seconds
  test environment: SSC_T1_IOT1
  test point 1: interoperability
  test point 2: JAP inter operablity test
  version: v1 (2016-8-15)
- CI ready: 'No'
  ID: WIFI_CONN_5203
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  auto test: 'No'
  category: IOT
  cmd set: ''
  execution time: TBD
  expected result: |-
    1. 配置成功，如有需要就重启路由
    2. 开始连接AP
    3. target 最终连接AP成功
    4. target 从 AP 断开
    5. target 重连AP成功
  initial condition: STAM1
  level: Integration
  module: WIFI MAC
  steps: |-
    1. 将每个需要测试的AP手动配置为该AP所有可能的模式（bgn），带宽，加密模式的组合
    2. 控制 target 连接 AP
    3. 快速在连接AP过程中对AP断电上电
    4. AP断电后再上电
    5. 等待 target 重连 AP
  sub module: WIFI Connect
  summary: power off and power on AP during JAP， reconnect after AP power off and
    power on
  test environment: SSC_T1_IOT1
  test point 1: interoperability
  test point 2: JAP inter operablity test
  version: v1 (2016-8-15)
- CI ready: 'No'
  ID: WIFI_CONN_5301
  SDK: |-
    8266_NonOS
    8266_RTOS
    ESP32_IDF
  Test App: SSC
  auto test: 'No'
  category: IOT
  cmd set: ''
  execution time: TBD
  expected result: 3. get test result form smart phone APK
  initial condition: None
  level: Integration
  module: WIFI MAC
  steps: |-
    1. setup a few SoftAP with different configs (special character in ssid/passwd, differnt auth type)
    2. install and config APK on all smart phones
    3. use APK to test WiFi connect
  sub module: WIFI Connect
  summary: connect to softap IOT test
  test environment: SSC_T5_IOT1
  test point 1: interoperability
  test point 2: Connect to SoftAP inter operablity test
  version: v1 (2016-10-18)
- CI ready: 'No'
  ID: WIFI_CONN_9901
  SDK: All
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Performance
  cmd set:
  - WiFiStress/WifiJAPCompatibility
  - - test_count = 10
    - - ''
  - - retry_count = 1
    - - ''
  execution time: 1
  expected result: 1. set succeed 2. disconnect succeed 3. connect succeed
  initial condition: STAM1
  level: Integration
  module: WIFI MAC
  steps: 1. set sta mode 2. disconnect sta 3. sta connect ap
  sub module: WIFI Connect
  summary: STA connect to AP compatibility test
  test environment: SSC_T1_IOT1
  test point 1: Compatibility Test test point
  test point 2: WIFI compatibility test
  version: v1 (2016-10-23)
- CI ready: 'No'
  ID: WIFI_CONN_0704
  SDK: All
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Function
  cmd set:
  - ''
  - - SSC SSC1 sta -C -s <wep_ap_ssid> -p <wep_ap_password>
    - - R SSC1 C +JAP:OK
      - R SSC1 NC +JAPAUTHCHANGED C +JAP:CONNECTED
  execution time: 0
  expected result: 1. sta connect ap suc and no +JAPAUTHCHANGED found
  initial condition: STAM1
  level: Integration
  module: WIFI MAC
  steps: 1. sta JAP
  sub module: WIFI Connect
  summary: sta connect wep encrypt ap
  test environment: SSC_T1_WEP
  test point 1: basic function
  test point 2: ap connect test
  version: v1 (2016-10-23)
- CI ready: 'No'
  ID: WIFI_CONN_9902
  SDK: All
  Test App: SSC
  allow fail: ''
  auto test: 'Yes'
  category: Performance
  cmd set:
  - WiFiStress/WifiStaConnectionHolder
  - - test_count = 10
    - - ''
  - - retry_count = 1
    - - ''
  execution time: 1
  expected result: |-
    1. set SSC1 AP+STA mode, SSC2 AP mode, SSC3 STA mode
    2. SSC3 connect SSC1
    3. SSC2 random set ap channel
    4. SSC1 connect SSC2
  initial condition: T3_1
  level: Integration
  module: WIFI MAC
  steps: |-
    1. set mode suc
    2. connect suc
    3. set channel suc
    4. connect suc
  sub module: WIFI Connect
  summary: STA keep connected with AP stable test
  test environment: SSC_T3_1
  test point 1: AP switch channel dut Connection holder Test test point
  test point 2: WIFI Connection holder test
  version: v1 (2016-10-23)