mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
872058f086
This feature can be enabled at runtime, by setting esp_lcd_dpi_panel_config_t:🎏:use_dma2d
84 lines
3.8 KiB
Markdown
84 lines
3.8 KiB
Markdown
| Supported Targets | ESP32-P4 |
|
|
| ----------------- | -------- |
|
|
|
|
# MIPI DSI LCD Panel Example
|
|
|
|
[esp_lcd](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/peripherals/lcd.html) supports MIPI DSI interfaced LCD panel, with frame buffer(s) managed by the driver itself.
|
|
|
|
This example shows the general process of installing a MIPI DSI LCD driver, and displays a LVGL widget on the screen.
|
|
|
|
## How to use the example
|
|
|
|
### Hardware Required
|
|
|
|
* An ESP development board, which with MIPI DSI peripheral supported
|
|
* A general MIPI DSI LCD panel, with 2 data lanes and 1 clock lane, this example will use the [ILI9881C](https://components.espressif.com/components/espressif/esp_lcd_ili9881c) for demonstration
|
|
* An USB cable for power supply and programming
|
|
|
|
### Hardware Connection
|
|
|
|
The connection between ESP Board and the LCD is as follows:
|
|
|
|
```text
|
|
ESP Board MIPI DSI LCD Panel
|
|
+-----------------------+ +-------------------+
|
|
| GND +--------------+ GND |
|
|
| | | |
|
|
| 3V3 +--------------+ VCC |
|
|
| | | |
|
|
| DSI_CLK_P +--------------+ DSI_CLK_P |
|
|
| DSI_CLK_N + + DSI_CLK_N |
|
|
| | | |
|
|
| DSI_DAT0_P +--------------+ DSI_DAT0_P |
|
|
| DAI_DAT0_N + + DAI_DAT0_N |
|
|
| | | |
|
|
| DSI_DAT1_P +--------------+ DSI_DAT1_P |
|
|
| DSI_DAT1_N + + DSI_DAT1_N |
|
|
| | | |
|
|
| | | |
|
|
| BK_LIGHT +--------------+ BLK |
|
|
| | | |
|
|
| Reset +--------------+ Reset |
|
|
| | | |
|
|
+-----------------------+ +-------------------+
|
|
```
|
|
|
|
Before testing your LCD, you also need to read your LCD spec carefully, and then adjust the values like "resolution" and "blank time" in the [main](./main/mipi_dsi_lcd_example_main.c) file.
|
|
|
|
### Configure
|
|
|
|
Run `idf.py menuconfig` and go to `Example Configuration`:
|
|
|
|
* Choose whether to `Use DMA2D to copy draw buffer to frame buffer` asynchronously. If you choose `No`, the draw buffer will be copied to the frame buffer synchronously by CPU.
|
|
|
|
### Build and Flash
|
|
|
|
Run `idf.py -p PORT build flash monitor` to build, flash and monitor the project. A LVGL widget should show up on the LCD as expected.
|
|
|
|
The first time you run `idf.py` for the example will cost extra time as the build system needs to address the component dependencies and downloads the missing components from registry into `managed_components` folder.
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the [Getting Started Guide](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/index.html) for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
### Example Output
|
|
|
|
```bash
|
|
...
|
|
I (1629) example: MIPI DSI PHY Powered on
|
|
I (1629) example: Install MIPI DSI LCD control panel
|
|
I (1639) ili9881c: ID1: 0x98, ID2: 0x81, ID3: 0x5c
|
|
I (1779) example: Install MIPI DSI LCD data panel
|
|
I (1799) example: Initialize LVGL library
|
|
I (1799) example: Allocate separate LVGL draw buffers from PSRAM
|
|
I (1809) example: Use esp_timer as LVGL tick timer
|
|
I (1809) example: Create LVGL task
|
|
I (1809) example: Starting LVGL task
|
|
I (1919) example: Display LVGL Meter Widget
|
|
...
|
|
```
|
|
|
|
## Troubleshooting
|
|
|
|
For any technical queries, please open an [issue](https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
|