| .. |
|
include
|
esp32h2: Enable ECC accelerator
|
2022-06-23 12:59:13 +05:30 |
|
ld
|
soc: Adds efuse hal
|
2022-02-24 22:20:09 +08:00 |
|
adc_periph.c
|
adc: create common adc hal layer
|
2022-05-07 19:20:44 +08:00 |
|
CMakeLists.txt
|
temperature_sensor: Add temperature sensor support for ESP32-C2
|
2022-06-23 15:36:43 +08:00 |
|
dedic_gpio_periph.c
|
fast_gpio: driver support on esp32c3
|
2021-09-06 19:39:09 +08:00 |
|
gdma_periph.c
|
gdma: support IRAM interrupt
|
2021-11-08 16:14:51 +08:00 |
|
gpio_periph.c
|
esp32h2: support GPIO peripheral, IO_MUX, GPIO matrix.
|
2022-03-04 11:25:05 +08:00 |
|
i2c_bbpll.h
|
esp32h2: add rtc clock support
|
2021-08-26 11:25:39 +08:00 |
|
i2c_bias.h
|
esp32h2: add rtc clock support
|
2021-08-26 11:25:39 +08:00 |
|
i2c_periph.c
|
esp32h2: copy driver/hal/soc components from esp32c3
|
2021-07-01 19:53:11 +08:00 |
|
i2c_pmu.h
|
esp32h2: add rtc clock support
|
2021-08-26 11:25:39 +08:00 |
|
i2c_ulp.h
|
esp32h2: add rtc clock support
|
2021-08-26 11:25:39 +08:00 |
|
i2s_periph.c
|
i2s: update copyright
|
2022-02-21 21:28:48 +08:00 |
|
interrupts.c
|
esp32h2: update reg and struct for beta2
|
2021-11-24 12:34:17 +08:00 |
|
ledc_periph.c
|
esp32h2: copy driver/hal/soc components from esp32c3
|
2021-07-01 19:53:11 +08:00 |
|
rmt_periph.c
|
rmt: document and improve LL driver
|
2022-03-09 10:58:12 +08:00 |
|
sigmadelta_periph.c
|
esp32h2: copy driver/hal/soc components from esp32c3
|
2021-07-01 19:53:11 +08:00 |
|
spi_periph.c
|
esp32h2: copy driver/hal/soc components from esp32c3
|
2021-07-01 19:53:11 +08:00 |
|
temperature_sensor_periph.c
|
temperature_sensor: Add temperature sensor support for ESP32-C2
|
2022-06-23 15:36:43 +08:00 |
|
timer_periph.c
|
gptimer: clean up hal and ll for driver-ng
|
2021-10-20 18:40:08 +08:00 |
|
uart_periph.c
|
uart: uart_set_pin function will now use IOMUX whenever possible
|
2021-08-04 12:48:30 +08:00 |
dd24639215