esp-idf/examples/cxx/experimental/esp_event_cxx/README.md
2023-01-17 10:29:04 +08:00

48 lines
1.3 KiB
Markdown

| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-H2 | ESP32-S2 | ESP32-S3 |
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
# ESP Event synchronous example
(See the README.md file in the upper level 'examples' directory for more information about examples.)
## How to use example
### Configure the project
```
idf.py menuconfig
```
* Set serial port under Serial Flasher Options.
### Build and Flash
Build the project and flash it to the board, then run monitor tool to view serial output:
```
idf.py -p PORT flash monitor
```
(To exit the serial monitor, type ``Ctrl-]``.)
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
## Example Output
```
I (409) ESP Event C++: started event loop
event base test, ID: 0; called first round
event base test, ID: 1; called first round
received timeout
event base test, ID: 0; called second round
event base test, ID: 1; called second round
event base test, ID: 0; called second round
event base test, ID: 1; called second round
event base test, ID: 0; called second round
event base test, ID: 1; called second round
event base test, ID: 0; called second round
event base test, ID: 1; called second round
I (10419) ESP Event C++: Missed: 0 events
```