mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
61 lines
1.6 KiB
Markdown
61 lines
1.6 KiB
Markdown
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-H2 | ESP32-S2 | ESP32-S3 |
|
|
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
|
|
|
# Example: Blink C++ example
|
|
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
This example demonstrates usage of the `GPIO_Output` C++ class in ESP-IDF.
|
|
|
|
In this example, the `sdkconfig.defaults` file sets the `CONFIG_COMPILER_CXX_EXCEPTIONS` option.
|
|
This enables both compile time support (`-fexceptions` compiler flag) and run-time support for C++ exception handling.
|
|
This is necessary for the C++ APIs.
|
|
|
|
## How to use example
|
|
|
|
### Hardware Required
|
|
|
|
Any ESP32 family development board.
|
|
|
|
Connect an LED to the corresponding pin (default is pin 4). If the board has a normal LED already, you can use the pin number to which that one is connected.
|
|
|
|
Development boards with an RGB LED that only has one data line like the ESP32-C3-DevKitC-02 and ESP32-C3-DevKitM-1 will not work. In this case, please connect an external normal LED to the chosen pin.
|
|
|
|
### Configure the project
|
|
|
|
```
|
|
idf.py menuconfig
|
|
```
|
|
|
|
### Build and Flash
|
|
|
|
```
|
|
idf.py -p PORT flash monitor
|
|
```
|
|
|
|
(Replace PORT with the name of the serial port.)
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example Output
|
|
|
|
```
|
|
...
|
|
I (339) cpu_start: Starting scheduler.
|
|
I (343) gpio: GPIO[4]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
|
|
LED ON
|
|
LED OFF
|
|
LED ON
|
|
LED OFF
|
|
LED ON
|
|
LED OFF
|
|
LED ON
|
|
LED OFF
|
|
LED ON
|
|
LED OFF
|
|
|
|
```
|
|
|