esp-idf/examples/mesh/internal_communication/README.md
2022-07-14 08:26:32 +08:00

27 lines
1.1 KiB
Markdown

| Supported Targets | ESP32 | ESP32-C3 | ESP32-S2 | ESP32-S3 |
| ----------------- | ----- | -------- | -------- | -------- |
# Mesh Internal Communication Example
This example demonstrates how to use the mesh APIs to set up a mesh network, send and receive messages over the mesh network and etc.
Features Demonstrated
- mesh initialization
- mesh configuration
- mesh start
- mesh event handler
- root send and receive
- other nodes receive
Open project configuration menu (`idf.py menuconfig`) to configure the mesh network channel, router SSID, router password and mesh softAP settings.
When the mesh network is established and if you happen to run this example on ESP-WROVER-KIT boards, the RGB light indicator will show you on which layer devices are.
The pink reprents root; the yellow reprents layer 2; the red reprents layer 3; the blue reprents layer 4; the green reprents layer 5; the white reprents layer greater than 5.
Root continuously sends an On / Off control message to all devices in its routing table. Devices including root itself receive this message and do the On / Off.