mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
4778d9b477
- Disable Kconfig option for Wifi if not supported by the SoC - Enable building mqtt examples when target is set to esp32h2
59 lines
2.0 KiB
Markdown
59 lines
2.0 KiB
Markdown
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-H2 | ESP32-S2 | ESP32-S3 |
|
|
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
|
|
|
# Async Requests Handlers HTTPD Server Example
|
|
|
|
The Example demonstrates how to handle multiple long running simultaneous requests
|
|
within the HTTPD server. It has the following URIs:
|
|
|
|
1. URI \long for demonstrating async requests running in the background
|
|
2. URI \quick for demonstrating that quick requests are still responsive
|
|
2. URI \ index page
|
|
|
|
## How to use example
|
|
|
|
### Hardware Required
|
|
|
|
* An ESP-Dev-Board (e.g., ESP32-DevKitC, ESP-WROVER-KIT, etc.)
|
|
* A USB cable for power supply and programming
|
|
|
|
### Configure the project
|
|
|
|
```
|
|
idf.py menuconfig
|
|
```
|
|
* Open the project configuration menu (`idf.py menuconfig`) to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
|
|
|
|
### Build and Flash
|
|
|
|
Build the project and flash it to the board, then run monitor tool to view serial output:
|
|
|
|
```
|
|
idf.py -p PORT flash monitor
|
|
```
|
|
|
|
(Replace PORT with the name of the serial port to use.)
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example Output
|
|
|
|
```
|
|
I (14257) example_common: Connected to example_netif_sta
|
|
I (14267) example_common: - IPv4 address: 192.168.20.85,
|
|
I (14277) example_common: - IPv6 address: fe80:0000:0000:0000:7edf:a1ff:fea4:3454, type: ESP_IP6_ADDR_IS_LINK_LOCAL
|
|
I (14287) example: starting async req task worker
|
|
I (14287) example: starting async req task worker
|
|
I (14297) example: Starting server on port: '80'
|
|
I (14307) example: Registering URI handlers
|
|
I (14307) main_task: Returned from app_main()
|
|
I (15547) wifi:<ba-add>idx:1 (ifx:0, 68:d7:9a:81:26:1e), tid:0, ssn:0, winSize:64
|
|
I (19627) example: uri: /
|
|
I (25877) example: uri: /quick
|
|
I (33247) example: uri: /long
|
|
I (33247) example: invoking /long
|
|
I (33247) example: uri: /long
|
|
```
|