Chen Jichang c240a1f46b feat(MCPWM): Add mcpwm carrier clk source ... The MCPWM carrier is part of the operator and can work independently without the MCPWM timer being enabled. This commit add the MCPWM carrier clk source.		2023-08-25 17:34:58 +08:00
..
include/soc	feat(MCPWM): Add mcpwm carrier clk source	2023-08-25 17:34:58 +08:00
ld	usb_host: Rename struct/ll/hal symbols to use "usb_dwc" prefix	2022-09-16 16:45:26 +08:00
adc_periph.c	adc: fix adc1 channel 8 and 9 not defined bug on s3	2021-12-08 18:21:28 +08:00
dedic_gpio_periph.c	dedic_gpio: support on esp32s3	2021-06-30 18:10:54 +08:00
gdma_periph.c	gdma: support IRAM interrupt	2021-11-08 16:14:51 +08:00
gpio_periph.c	gpio: Fix ESP32S3 GPIO48 does not support hold function bug	2022-07-15 16:51:25 +08:00
i2c_periph.c	Whitespace: Automated whitespace fixes (large commit)	2020-11-11 07:36:35 +00:00
i2s_periph.c	i2s: support 4 line pdm rx on esp32s3	2022-11-04 15:46:34 +08:00
interrupts.c	esp32s3: fix interrupt names used by SystemView	2022-08-11 11:23:03 +02:00
lcd_periph.c	lcd: unify callback prototype	2021-10-02 14:23:31 +08:00
ledc_periph.c	Whitespace: Automated whitespace fixes (large commit)	2020-11-11 07:36:35 +00:00
mcpwm_periph.c	mcpwm: clean up hal driver and add doc	2022-06-02 15:01:18 +08:00
pcnt_periph.c	pulse_cnt: new driver for PCNT peripheral	2022-03-03 22:38:32 +08:00
rmt_periph.c	rmt: document and improve LL driver	2022-03-09 10:58:12 +08:00
rtc_io_periph.c	esp32c6: clean up existing soc files and header file inclusion in IDF to be compatible with the new chip	2022-09-01 12:28:06 +08:00
sdm_periph.c	sdm: clean up soc/hal/ll code	2022-07-20 14:59:50 +08:00
sdmmc_periph.c	soc: add esp32s3 sdmmc support	2021-05-10 23:21:27 +02:00
spi_periph.c	spi_master:fix error when use spi_bus_add_device more than 3 device	2022-09-05 12:10:22 +08:00
temperature_sensor_periph.c	temperature_sensor: Add temperature sensor support for ESP32-C2	2022-06-23 15:36:43 +08:00
timer_periph.c	gptimer: clean up hal and ll for driver-ng	2021-10-20 18:40:08 +08:00
touch_sensor_periph.c	soc: added SOC_TOUCH_SENSE_SUPPORTED macro	2022-07-22 00:12:36 +00:00
twai_periph.c	twai: describe peripheral info	2022-11-04 17:40:29 +08:00
uart_periph.c	uart: uart_set_pin function will now use IOMUX whenever possible	2021-08-04 12:48:30 +08:00
usb_otg_periph.c	usb: Allow settings of all signals in usb_phy	2022-10-18 09:18:29 +02:00
usb_periph.c	soc/hal: add tinyusb support esp32s3	2021-05-06 16:20:54 +08:00