esp-idf/examples/protocols/sockets
Euripedes Rocha 4778d9b477 protocols/examples: Disable Wifi connection if not supported
- Disable Kconfig option for Wifi if not supported by the SoC
- Enable building mqtt examples when target is set to esp32h2
2023-05-30 13:26:45 +02:00
..
icmpv6_ping protocols/examples: Disable Wifi connection if not supported 2023-05-30 13:26:45 +02:00
non_blocking protocols/examples: Disable Wifi connection if not supported 2023-05-30 13:26:45 +02:00
scripts example: add socket scripts again 2022-12-16 19:03:25 +08:00
tcp_client protocols/examples: Disable Wifi connection if not supported 2023-05-30 13:26:45 +02:00
tcp_client_multi_net protocols/examples: Disable Wifi connection if not supported 2023-05-30 13:26:45 +02:00
tcp_server protocols/examples: Disable Wifi connection if not supported 2023-05-30 13:26:45 +02:00
tcp_transport_client protocols/examples: Disable Wifi connection if not supported 2023-05-30 13:26:45 +02:00
udp_client protocols/examples: Disable Wifi connection if not supported 2023-05-30 13:26:45 +02:00
udp_multicast protocols/examples: Disable Wifi connection if not supported 2023-05-30 13:26:45 +02:00
udp_server protocols/examples: Disable Wifi connection if not supported 2023-05-30 13:26:45 +02:00
README.md example: add socket scripts again 2022-12-16 19:03:25 +08:00

BSD Socket API Examples

This directory contains simple examples demonstrating BSD Socket API. Each example, contains README.md file with mode detailed informations about that particular example. For more general informations about all examples, see the README.md file in the upper level 'examples' directory. Examples:

  • UDP Client - The application creates UDP socket and sends message to the predefined port and IP address. After the server's reply, the application prints received reply as ASCII text, waits for 2 seconds and sends another message.

  • UDP Server - The application creates UDP socket with the specified port number and waits for the data to be received. Received data are printed as ASCII text and retransmitted back to the client.

  • TCP Client - The application creates a TCP socket and tries to connect to the server with predefined IP address and port number. When a connection is successfully established, the application sends message and waits for the answer. After the server's reply, application prints received reply as ASCII text, waits for 2 seconds and sends another message.

  • TCP Server - The application creates a TCP socket with the specified port number and waits for a connection request from the client. After accepting a request from the client, connection between server and client is established and the application waits for some data to be received from the client. Received data are printed as ASCII text and retransmitted back to the client.

  • UDP Multicast - The application shows how to use the IPV4 & IPV6 UDP multicast features via the BSD-style sockets interface.

Standard BSD API documentation: http://pubs.opengroup.org/onlinepubs/007908799/xnsix.html

Other references: https://csperkins.org/teaching/2007-2008/networked-systems/lecture04.pdf http://wiki.treck.com/Introduction_to_BSD_Sockets

Host tools

There are many host-side tools which can be used to interact with the UDP/TCP server/client example. One command line tool is netcat which can send and receive many kinds of packets. Note: please replace 192.168.0.167 3333 with desired IPV4/IPV6 address (displayed in monitor console) and port number in the following commands.

In addition to those tools, There are some python scripts under examples/protocols/sockets/scripts. And scripts for automated tests named pytest_xxx.py can be found under each example directory.

Python Scripts Socket Tools

Python scripts under examples/protocols/sockets/scripts could be used to exercise the socket communication. Command line arguments such as IP version and IP address shall be supplied. Use python xxxx.py --help to see how to use these scripts.

Examples:

# python run_tcp_client.py --help
python run_tcp_client.py 192.168.1.2 [--port=3333] [--message="Data to ESP"]
python run_tcp_client.py fe80::2%eth0 [--port=3333] [--message="Data to ESP"]
# python run_tcp_server.py --help
python run_tcp_server.py [--port=3333] [--ipv6]

Python Scripts For Automated Tests

Script named pytest_xxxx in the application directory can be used for automated tests. They can also be run locally. Ref: ESP-IDF Tests with Pytest Guide.

Example:

$ cd $IDF_PATH
$ bash install.sh --enable-pytest
$ . ./export.sh
$ cd examples/protocols/sockets/tcp_client
$ python $IDF_PATH/tools/ci/ci_build_apps.py . --target esp32 -vv --pytest-apps
$ pytest --target esp32

Send UDP packet via netcat

echo "Hello from PC" | nc -w1 -u 192.168.0.167 3333

Receive UDP packet via netcat

echo "Hello from PC" | nc -w1 -u 192.168.0.167 3333

UDP client using netcat

nc -u 192.168.0.167 3333

UDP server using netcat

nc -u -l 192.168.0.167 -p 3333

TCP client using netcat

nc 192.168.0.167 3333

TCP server using netcat

nc -l 192.168.0.167 -p 3333

Note about IPv6 addresses

Examples are configured to obtain multiple IPv6 addresses. The actual behavior may differ depending on the local network, typically the ESP gets assigned these two addresses

  • Local Link address

  • Unique Local address

The value and type of the IPv6 address is displayed in the terminal, for example:

Please make sure that when using the Local Link address, an interface id is included in the configuration:

  • In the embedded code
    dest_addr.sin6_scope_id = esp_netif_get_netif_impl_index(esp_netif_instance);
  • On the host

    • Interface name suffix is present when passing the address as a string, for example fe80::260a:XXX:XXX:XXX%en0
    • The interface id is present when passing the endpoint as tupple, for example socket.connect(('fd00::260a:XXXX:XXXX:XXXX', 3333, 0, 3))

Hardware Required

This example can be run on any commonly available ESP32 development board.

Configure the project

idf.py menuconfig
  • Specific configuration for each example can be found in its README.md file.

Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py -p PORT flash monitor

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.