mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
45 lines
1.5 KiB
Markdown
45 lines
1.5 KiB
Markdown
| Supported Targets | ESP32 | ESP32-C3 | ESP32-S2 | ESP32-S3 |
|
|
| ----------------- | ----- | -------- | -------- | -------- |
|
|
|
|
# SPI Host Driver Example
|
|
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
This example aims to show how to use SPI Host driver API, like `spi_transaction_t` and spi_device_queue.
|
|
|
|
If you are looking for code to drive LCDs in general, rather than code that uses the SPI master, that may be a better example to look at as it uses ESP-IDFs built-in LCD support rather than doing all the low-level work itself, which can be found at `examples/peripherals/lcd/tjpgd/`
|
|
|
|
## How to Use Example
|
|
|
|
### Hardware Required
|
|
|
|
* An ESP development board, with SPI LCD
|
|
|
|
Connection :
|
|
|
|
Depends on boards. Refer to `spi_master_example_main.c` No wiring is required on ESP-WROVER-KIT
|
|
|
|
### Build and Flash
|
|
|
|
Run `idf.py -p PORT flash monitor` to build, flash and monitor the project.
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the [Getting Started Guide](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/index.html) for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example Output
|
|
|
|
On ESP-WROVER-KIT there will be:
|
|
|
|
```
|
|
LCD ID: 00000000
|
|
ILI9341 detected.
|
|
LCD ILI9341 initialization.
|
|
```
|
|
|
|
At the meantime `ESP32` will be displayed on the connected LCD screen.
|
|
|
|
## Troubleshooting
|
|
|
|
For any technical queries, please open an [issue] (https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
|