mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
76 lines
2.8 KiB
Markdown
76 lines
2.8 KiB
Markdown
| Supported Targets | ESP32 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
|
| ----------------- | ----- | -------- | -------- | -------- | -------- |
|
|
|
|
# Deep Sleep Wake Stub Example
|
|
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
The [Deep-sleep wake stub](https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/deep-sleep-stub.html) is used to RTC fast boot mode that avoid the SPI flash booting, thus speeding up the wakeup process. This example demonstrates how to implement the wake stub.
|
|
|
|
In this example, the `CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP` Kconfig option is used, which allows you to reduce the boot time of the bootloader during waking up from deep sleep. The bootloader stores in rtc memory the address of a running partition and uses it when it wakes up. This example allows you to skip all image checks and speed up the boot.
|
|
|
|
## How to use example
|
|
|
|
### Hardware Required
|
|
|
|
This example should be able to run on any commonly available ESP32/ESP32-S2/ESP32-S3/ESP32-C3 development board without any extra hardware if only **Timer** wake up sources are used.
|
|
|
|
### Configure the project
|
|
|
|
|
|
```
|
|
idf.py menuconfig
|
|
```
|
|
|
|
* **Wake up time** can be configured via `Example configuration > Wake up interval in seconds`
|
|
Wake up sources that are unused or unconnected should be disabled in configuration to prevent inadvertent triggering of wake up as a result of floating pins.
|
|
|
|
|
|
### Build and Flash
|
|
|
|
Build the project and flash it to the board, then run monitor tool to view serial output:
|
|
|
|
```
|
|
idf.py -p PORT flash monitor
|
|
```
|
|
|
|
(Replace PORT with the name of the serial port to use.)
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example Output
|
|
|
|
On initial startup, this example will detect that this is the first boot and output the following log:
|
|
|
|
```
|
|
...
|
|
I (309) cpu_start: Starting scheduler on PRO CPU.
|
|
I (0) cpu_start: Starting scheduler on APP CPU.
|
|
Not a deep sleep reset
|
|
Enabling timer wakeup, 10s
|
|
Entering deep sleep
|
|
```
|
|
|
|
The ESP chips will then enter deep sleep. When a timer wake up occurs, if deep sleep wake stub enabled, the ESP chips will boot from RTC memory and execute stub code. The output log such as the following:
|
|
|
|
```
|
|
...
|
|
ESP-ROM:esp32s3-20210327
|
|
Build:Mar 27 2021
|
|
rst:0x5 (DSLEEP),boot:0x8 (SPI_FAST_FLASH_BOOT)
|
|
wake stub: wakeup count is 1, wakeup cause is 8
|
|
wake stub: going to deep sleep
|
|
ESP-ROM:esp32s3-20210327
|
|
Build:Mar 27 2021
|
|
rst:0x5 (DSLEEP),boot:0x8 (SPI_FAST_FLASH_BOOT)
|
|
wake stub: wakeup count is 2, wakeup cause is 8
|
|
wake stub: going to deep sleep
|
|
ESP-ROM:esp32s3-20210327
|
|
Build:Mar 27 2021
|
|
rst:0x5 (DSLEEP),boot:0x8 (SPI_FAST_FLASH_BOOT)
|
|
wake stub: wakeup count is 3, wakeup cause is 8
|
|
wake stub: going to deep sleep
|
|
```
|