esp-idf/examples/peripherals/spi_master/hd_eeprom/README.md

972 B

Supported Targets ESP32 ESP32-C2 ESP32-C3 ESP32-C6 ESP32-H2 ESP32-S2 ESP32-S3

SPI master half duplex EEPROM example

This code demonstrates how to use the SPI master half duplex mode to read/write a AT93C46D EEPROM (8-bit mode). There is also an Kconfig option EXAMPLE_USE_SPI1_PINS allowing use the SPI1 (bus with code Flash connected on official modules).

Connections

For different chip and host used, the connections may be different. Here show a example diagram of hardware connection, you can freely change the GPIO defined in start of main/spi_eeprom_main.c and change the hardware relatively.

ESP32
Host SPI1
VCC 3.3V
GND GND
DO 7
DI 8
SK 6
CS 13
ORG GND

Notes

If you meet timeout issues, please check your connections.