mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
107 lines
4.1 KiB
Markdown
107 lines
4.1 KiB
Markdown
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-H2 | ESP32-H4 | ESP32-S3 |
|
|
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
|
|
|
# ESP-IDF Gatt Server Example
|
|
|
|
This example shows how create a GATT service by adding attributes one by one. However, this method is defined by Bluedroid and is difficult for users to use.
|
|
|
|
Hence, we also allow users to create a GATT service with an attribute table, which releases the user from adding attributes one by one. And it is recommended for users to use. For more information about this method, please refer to [gatt_server_service_table_demo](../gatt_server_service_table).
|
|
|
|
This demo creates GATT a service and then starts advertising, waiting to be connected to a GATT client.
|
|
|
|
To test this demo, we can run the [gatt_client_demo](../gatt_client), which can scan for and connect to this demo automatically. They will start exchanging data once the GATT client has enabled the notification function of the GATT server.
|
|
|
|
Please, check this [tutorial](tutorial/Gatt_Server_Example_Walkthrough.md) for more information about this example.
|
|
|
|
## How to Use Example
|
|
|
|
Before project configuration and build, be sure to set the correct chip target using:
|
|
|
|
```bash
|
|
idf.py set-target <chip_name>
|
|
```
|
|
|
|
### Hardware Required
|
|
|
|
* A development board with ESP32/ESP32-C3/ESP32-C2/ESP32-H4/ESP-S3 SoC (e.g., ESP32-DevKitC, ESP-WROVER-KIT, etc.)
|
|
* A USB cable for Power supply and programming
|
|
|
|
See [Development Boards](https://www.espressif.com/en/products/devkits) for more information about it.
|
|
|
|
### Build and Flash
|
|
|
|
Run `idf.py -p PORT flash monitor` to build, flash and monitor the project.
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the [Getting Started Guide](https://idf.espressif.com/) for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
### Settings for UUID128
|
|
|
|
This example works with UUID16 as default. To change to UUID128, follow this steps:
|
|
|
|
1. Change the UIID16 to UUID128. You can change the UUID according to your needs.
|
|
|
|
```c
|
|
// Create a new UUID128 (using random values for this example)
|
|
uint8_t gatts_service_uuid128_test_X[ESP_UUID_LEN_128] = {0x06, 0x18, 0x7a, 0xec, 0xbe, 0x11, 0x11, 0xea, 0x00, 0x16, 0x02, 0x42, 0x01, 0x13, 0x00, 0x04};
|
|
```
|
|
|
|
By adding this new UUID128, you can remove the `#define` macros with the old UUID16.
|
|
|
|
2. Add the new UUID128 to the profile.
|
|
|
|
```c
|
|
// Change the size of the UUID from 16 to 128
|
|
gl_profile_tab[PROFILE_X_APP_ID].service_id.id.uuid.len = ESP_UUID_LEN_128;
|
|
// Copy the new UUID128 to the profile
|
|
memcpy(gl_profile_tab[PROFILE_X_APP_ID].service_id.id.uuid.uuid.uuid128, gatts_service_uuid128_test_X, ESP_UUID_LEN_128);
|
|
```
|
|
|
|
3. Remove the following line(s)
|
|
```c
|
|
gl_profile_tab[PROFILE_X_APP_ID].service_id.id.uuid.uuid.uuid16 = GATTS_SERVICE_UUID_TEST_X;
|
|
```
|
|
|
|
## Example Output
|
|
|
|
```
|
|
I (0) cpu_start: Starting scheduler on APP CPU.
|
|
I (512) BTDM_INIT: BT controller compile version [1342a48]
|
|
I (522) system_api: Base MAC address is not set
|
|
I (522) system_api: read default base MAC address from EFUSE
|
|
I (522) phy_init: phy_version 4670,719f9f6,Feb 18 2021,17:07:07
|
|
I (922) GATTS_DEMO: REGISTER_APP_EVT, status 0, app_id 0
|
|
|
|
I (932) GATTS_DEMO: CREATE_SERVICE_EVT, status 0, service_handle 40
|
|
|
|
I (942) GATTS_DEMO: REGISTER_APP_EVT, status 0, app_id 1
|
|
|
|
I (952) GATTS_DEMO: SERVICE_START_EVT, status 0, service_handle 40
|
|
|
|
I (952) GATTS_DEMO: ADD_CHAR_EVT, status 0, attr_handle 42, service_handle 40
|
|
|
|
I (962) GATTS_DEMO: the gatts demo char length = 3
|
|
|
|
I (962) GATTS_DEMO: prf_char[0] =11
|
|
|
|
I (972) GATTS_DEMO: prf_char[1] =22
|
|
|
|
I (972) GATTS_DEMO: prf_char[2] =33
|
|
|
|
I (982) GATTS_DEMO: CREATE_SERVICE_EVT, status 0, service_handle 44
|
|
|
|
I (982) GATTS_DEMO: ADD_DESCR_EVT, status 0, attr_handle 43, service_handle 40
|
|
|
|
I (992) GATTS_DEMO: SERVICE_START_EVT, status 0, service_handle 44
|
|
|
|
I (1002) GATTS_DEMO: ADD_CHAR_EVT, status 0, attr_handle 46, service_handle 44
|
|
|
|
I (1012) GATTS_DEMO: ADD_DESCR_EVT, status 0, attr_handle 47, service_handle 44
|
|
|
|
```
|
|
|
|
## Troubleshooting
|
|
|
|
For any technical queries, please open an [issue](https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
|