esp-idf/components/spi_flash/cache_utils.c
Alexey Gerenkov 39ddc7b836 esp32: Fixes several issues in core dump feature
1) PS is fixed up to allow GDB backtrace to work properly
2) MR!341 discussion: in core dump module: esp_panicPutXXX was replaced by ets_printf.
3) MR!341 discussion: core dump flash magic number was changed.
4) MR!341 discussion: SPI flash access API was redesigned to allow flexible critical section management.
5) test app for core dump feature was added
6) fixed base64 file reading issues on Windows platform
7) now raw bin core file is deleted upon core loader failure by epscoredump.py
2017-01-11 20:51:28 +03:00

256 lines
8.6 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdlib.h>
#include <assert.h>
#include <string.h>
#include <stdio.h>
#include <freertos/FreeRTOS.h>
#include <freertos/task.h>
#include <freertos/semphr.h>
#include <rom/spi_flash.h>
#include <rom/cache.h>
#include <soc/soc.h>
#include <soc/dport_reg.h>
#include "sdkconfig.h"
#include "esp_ipc.h"
#include "esp_attr.h"
#include "esp_intr_alloc.h"
#include "esp_spi_flash.h"
#include "esp_log.h"
static void IRAM_ATTR spi_flash_disable_cache(uint32_t cpuid, uint32_t* saved_state);
static void IRAM_ATTR spi_flash_restore_cache(uint32_t cpuid, uint32_t saved_state);
static uint32_t s_flash_op_cache_state[2];
#ifndef CONFIG_FREERTOS_UNICORE
static SemaphoreHandle_t s_flash_op_mutex;
static volatile bool s_flash_op_can_start = false;
static volatile bool s_flash_op_complete = false;
void spi_flash_init_lock()
{
s_flash_op_mutex = xSemaphoreCreateMutex();
}
void spi_flash_op_lock()
{
xSemaphoreTake(s_flash_op_mutex, portMAX_DELAY);
}
void spi_flash_op_unlock()
{
xSemaphoreGive(s_flash_op_mutex);
}
void IRAM_ATTR spi_flash_op_block_func(void* arg)
{
// Disable scheduler on this CPU
vTaskSuspendAll();
// Restore interrupts that aren't located in IRAM
esp_intr_noniram_disable();
uint32_t cpuid = (uint32_t) arg;
// Disable cache so that flash operation can start
spi_flash_disable_cache(cpuid, &s_flash_op_cache_state[cpuid]);
s_flash_op_can_start = true;
while (!s_flash_op_complete) {
// until we have a way to use interrupts for inter-CPU communication,
// busy loop here and wait for the other CPU to finish flash operation
}
// Flash operation is complete, re-enable cache
spi_flash_restore_cache(cpuid, s_flash_op_cache_state[cpuid]);
// Restore interrupts that aren't located in IRAM
esp_intr_noniram_enable();
// Re-enable scheduler
xTaskResumeAll();
}
void IRAM_ATTR spi_flash_disable_interrupts_caches_and_other_cpu()
{
spi_flash_op_lock();
const uint32_t cpuid = xPortGetCoreID();
const uint32_t other_cpuid = (cpuid == 0) ? 1 : 0;
if (xTaskGetSchedulerState() == taskSCHEDULER_NOT_STARTED) {
// Scheduler hasn't been started yet, it means that spi_flash API is being
// called from the 2nd stage bootloader or from user_start_cpu0, i.e. from
// PRO CPU. APP CPU is either in reset or spinning inside user_start_cpu1,
// which is in IRAM. So it is safe to disable cache for the other_cpuid here.
assert(other_cpuid == 1);
spi_flash_disable_cache(other_cpuid, &s_flash_op_cache_state[other_cpuid]);
} else {
// Signal to the spi_flash_op_block_task on the other CPU that we need it to
// disable cache there and block other tasks from executing.
s_flash_op_can_start = false;
s_flash_op_complete = false;
esp_ipc_call(other_cpuid, &spi_flash_op_block_func, (void*) other_cpuid);
while (!s_flash_op_can_start) {
// Busy loop and wait for spi_flash_op_block_func to disable cache
// on the other CPU
}
// Disable scheduler on CPU cpuid
vTaskSuspendAll();
// This is guaranteed to run on CPU <cpuid> because the other CPU is now
// occupied by highest priority task
assert(xPortGetCoreID() == cpuid);
}
// Kill interrupts that aren't located in IRAM
esp_intr_noniram_disable();
// Disable cache on this CPU as well
spi_flash_disable_cache(cpuid, &s_flash_op_cache_state[cpuid]);
}
void IRAM_ATTR spi_flash_enable_interrupts_caches_and_other_cpu()
{
const uint32_t cpuid = xPortGetCoreID();
const uint32_t other_cpuid = (cpuid == 0) ? 1 : 0;
// Re-enable cache on this CPU
spi_flash_restore_cache(cpuid, s_flash_op_cache_state[cpuid]);
if (xTaskGetSchedulerState() == taskSCHEDULER_NOT_STARTED) {
// Scheduler is not running yet — this means we are running on PRO CPU.
// other_cpuid is APP CPU, and it is either in reset or is spinning in
// user_start_cpu1, which is in IRAM. So we can simply reenable cache.
assert(other_cpuid == 1);
spi_flash_restore_cache(other_cpuid, s_flash_op_cache_state[other_cpuid]);
} else {
// Signal to spi_flash_op_block_task that flash operation is complete
s_flash_op_complete = true;
// Resume tasks on the current CPU
xTaskResumeAll();
}
// Release API lock
spi_flash_op_unlock();
// Re-enable non-iram interrupts
esp_intr_noniram_enable();
}
void IRAM_ATTR spi_flash_disable_interrupts_caches_and_other_cpu_no_os()
{
const uint32_t cpuid = xPortGetCoreID();
const uint32_t other_cpuid = (cpuid == 0) ? 1 : 0;
// do not care about other CPU, it was halted upon entering panic handler
spi_flash_disable_cache(other_cpuid, &s_flash_op_cache_state[other_cpuid]);
// Kill interrupts that aren't located in IRAM
esp_intr_noniram_disable();
// Disable cache on this CPU as well
spi_flash_disable_cache(cpuid, &s_flash_op_cache_state[cpuid]);
}
void IRAM_ATTR spi_flash_enable_interrupts_caches_no_os()
{
const uint32_t cpuid = xPortGetCoreID();
// Re-enable cache on this CPU
spi_flash_restore_cache(cpuid, s_flash_op_cache_state[cpuid]);
// Re-enable non-iram interrupts
esp_intr_noniram_enable();
}
#else // CONFIG_FREERTOS_UNICORE
void spi_flash_init_lock()
{
}
void spi_flash_op_lock()
{
vTaskSuspendAll();
}
void spi_flash_op_unlock()
{
xTaskResumeAll();
}
void IRAM_ATTR spi_flash_disable_interrupts_caches_and_other_cpu()
{
esp_intr_noniram_disable();
spi_flash_op_lock();
spi_flash_disable_cache(0, &s_flash_op_cache_state[0]);
}
void IRAM_ATTR spi_flash_enable_interrupts_caches_and_other_cpu()
{
spi_flash_restore_cache(0, s_flash_op_cache_state[0]);
spi_flash_op_unlock();
esp_intr_noniram_enable();
}
void IRAM_ATTR spi_flash_disable_interrupts_caches_and_other_cpu_no_os()
{
// Kill interrupts that aren't located in IRAM
esp_intr_noniram_disable();
// Disable cache on this CPU as well
spi_flash_disable_cache(0, &s_flash_op_cache_state[0]);
}
void IRAM_ATTR spi_flash_enable_interrupts_caches_no_os()
{
// Re-enable cache on this CPU
spi_flash_restore_cache(0, s_flash_op_cache_state[0]);
// Re-enable non-iram interrupts
esp_intr_noniram_enable();
}
#endif // CONFIG_FREERTOS_UNICORE
/**
* The following two functions are replacements for Cache_Read_Disable and Cache_Read_Enable
* function in ROM. They are used to work around a bug where Cache_Read_Disable requires a call to
* Cache_Flush before Cache_Read_Enable, even if cached data was not modified.
*/
static const uint32_t cache_mask = DPORT_APP_CACHE_MASK_OPSDRAM | DPORT_APP_CACHE_MASK_DROM0 |
DPORT_APP_CACHE_MASK_DRAM1 | DPORT_APP_CACHE_MASK_IROM0 |
DPORT_APP_CACHE_MASK_IRAM1 | DPORT_APP_CACHE_MASK_IRAM0;
static void IRAM_ATTR spi_flash_disable_cache(uint32_t cpuid, uint32_t* saved_state)
{
uint32_t ret = 0;
if (cpuid == 0) {
ret |= GET_PERI_REG_BITS2(DPORT_PRO_CACHE_CTRL1_REG, cache_mask, 0);
while (GET_PERI_REG_BITS2(DPORT_PRO_DCACHE_DBUG0_REG, DPORT_PRO_CACHE_STATE, DPORT_PRO_CACHE_STATE_S) != 1) {
;
}
SET_PERI_REG_BITS(DPORT_PRO_CACHE_CTRL_REG, 1, 0, DPORT_PRO_CACHE_ENABLE_S);
} else {
ret |= GET_PERI_REG_BITS2(DPORT_APP_CACHE_CTRL1_REG, cache_mask, 0);
while (GET_PERI_REG_BITS2(DPORT_APP_DCACHE_DBUG0_REG, DPORT_APP_CACHE_STATE, DPORT_APP_CACHE_STATE_S) != 1) {
;
}
SET_PERI_REG_BITS(DPORT_APP_CACHE_CTRL_REG, 1, 0, DPORT_APP_CACHE_ENABLE_S);
}
*saved_state = ret;
}
static void IRAM_ATTR spi_flash_restore_cache(uint32_t cpuid, uint32_t saved_state)
{
if (cpuid == 0) {
SET_PERI_REG_BITS(DPORT_PRO_CACHE_CTRL_REG, 1, 1, DPORT_PRO_CACHE_ENABLE_S);
SET_PERI_REG_BITS(DPORT_PRO_CACHE_CTRL1_REG, cache_mask, saved_state, 0);
} else {
SET_PERI_REG_BITS(DPORT_APP_CACHE_CTRL_REG, 1, 1, DPORT_APP_CACHE_ENABLE_S);
SET_PERI_REG_BITS(DPORT_APP_CACHE_CTRL1_REG, cache_mask, saved_state, 0);
}
}