esp-idf/components/spi_flash/cache_utils.c

256 lines
8.6 KiB
C
Raw Normal View History

2016-08-17 11:08:22 -04:00
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
2016-08-17 11:08:22 -04:00
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdlib.h>
#include <assert.h>
#include <string.h>
#include <stdio.h>
2016-08-17 11:08:22 -04:00
#include <freertos/FreeRTOS.h>
#include <freertos/task.h>
#include <freertos/semphr.h>
#include <rom/spi_flash.h>
#include <rom/cache.h>
#include <soc/soc.h>
2016-08-17 11:08:22 -04:00
#include <soc/dport_reg.h>
#include "sdkconfig.h"
#include "esp_ipc.h"
#include "esp_attr.h"
#include "esp_intr_alloc.h"
#include "esp_spi_flash.h"
#include "esp_log.h"
2016-08-17 11:08:22 -04:00
static void IRAM_ATTR spi_flash_disable_cache(uint32_t cpuid, uint32_t* saved_state);
static void IRAM_ATTR spi_flash_restore_cache(uint32_t cpuid, uint32_t saved_state);
static uint32_t s_flash_op_cache_state[2];
#ifndef CONFIG_FREERTOS_UNICORE
static SemaphoreHandle_t s_flash_op_mutex;
static volatile bool s_flash_op_can_start = false;
static volatile bool s_flash_op_complete = false;
void spi_flash_init_lock()
{
s_flash_op_mutex = xSemaphoreCreateMutex();
}
void spi_flash_op_lock()
{
xSemaphoreTake(s_flash_op_mutex, portMAX_DELAY);
}
void spi_flash_op_unlock()
{
xSemaphoreGive(s_flash_op_mutex);
}
void IRAM_ATTR spi_flash_op_block_func(void* arg)
2016-08-17 11:08:22 -04:00
{
// Disable scheduler on this CPU
vTaskSuspendAll();
// Restore interrupts that aren't located in IRAM
esp_intr_noniram_disable();
uint32_t cpuid = (uint32_t) arg;
// Disable cache so that flash operation can start
spi_flash_disable_cache(cpuid, &s_flash_op_cache_state[cpuid]);
s_flash_op_can_start = true;
while (!s_flash_op_complete) {
// until we have a way to use interrupts for inter-CPU communication,
// busy loop here and wait for the other CPU to finish flash operation
2016-08-17 11:08:22 -04:00
}
// Flash operation is complete, re-enable cache
spi_flash_restore_cache(cpuid, s_flash_op_cache_state[cpuid]);
// Restore interrupts that aren't located in IRAM
esp_intr_noniram_enable();
// Re-enable scheduler
xTaskResumeAll();
2016-08-17 11:08:22 -04:00
}
void IRAM_ATTR spi_flash_disable_interrupts_caches_and_other_cpu()
{
spi_flash_op_lock();
const uint32_t cpuid = xPortGetCoreID();
const uint32_t other_cpuid = (cpuid == 0) ? 1 : 0;
if (xTaskGetSchedulerState() == taskSCHEDULER_NOT_STARTED) {
// Scheduler hasn't been started yet, it means that spi_flash API is being
// called from the 2nd stage bootloader or from user_start_cpu0, i.e. from
// PRO CPU. APP CPU is either in reset or spinning inside user_start_cpu1,
// which is in IRAM. So it is safe to disable cache for the other_cpuid here.
assert(other_cpuid == 1);
spi_flash_disable_cache(other_cpuid, &s_flash_op_cache_state[other_cpuid]);
} else {
// Signal to the spi_flash_op_block_task on the other CPU that we need it to
// disable cache there and block other tasks from executing.
s_flash_op_can_start = false;
s_flash_op_complete = false;
esp_ipc_call(other_cpuid, &spi_flash_op_block_func, (void*) other_cpuid);
while (!s_flash_op_can_start) {
// Busy loop and wait for spi_flash_op_block_func to disable cache
// on the other CPU
}
// Disable scheduler on CPU cpuid
vTaskSuspendAll();
// This is guaranteed to run on CPU <cpuid> because the other CPU is now
// occupied by highest priority task
assert(xPortGetCoreID() == cpuid);
}
// Kill interrupts that aren't located in IRAM
esp_intr_noniram_disable();
// Disable cache on this CPU as well
spi_flash_disable_cache(cpuid, &s_flash_op_cache_state[cpuid]);
}
void IRAM_ATTR spi_flash_enable_interrupts_caches_and_other_cpu()
{
const uint32_t cpuid = xPortGetCoreID();
const uint32_t other_cpuid = (cpuid == 0) ? 1 : 0;
// Re-enable cache on this CPU
spi_flash_restore_cache(cpuid, s_flash_op_cache_state[cpuid]);
if (xTaskGetSchedulerState() == taskSCHEDULER_NOT_STARTED) {
// Scheduler is not running yet — this means we are running on PRO CPU.
// other_cpuid is APP CPU, and it is either in reset or is spinning in
// user_start_cpu1, which is in IRAM. So we can simply reenable cache.
assert(other_cpuid == 1);
spi_flash_restore_cache(other_cpuid, s_flash_op_cache_state[other_cpuid]);
} else {
// Signal to spi_flash_op_block_task that flash operation is complete
s_flash_op_complete = true;
// Resume tasks on the current CPU
xTaskResumeAll();
}
// Release API lock
spi_flash_op_unlock();
// Re-enable non-iram interrupts
esp_intr_noniram_enable();
}
void IRAM_ATTR spi_flash_disable_interrupts_caches_and_other_cpu_no_os()
{
const uint32_t cpuid = xPortGetCoreID();
const uint32_t other_cpuid = (cpuid == 0) ? 1 : 0;
// do not care about other CPU, it was halted upon entering panic handler
spi_flash_disable_cache(other_cpuid, &s_flash_op_cache_state[other_cpuid]);
// Kill interrupts that aren't located in IRAM
esp_intr_noniram_disable();
// Disable cache on this CPU as well
spi_flash_disable_cache(cpuid, &s_flash_op_cache_state[cpuid]);
}
void IRAM_ATTR spi_flash_enable_interrupts_caches_no_os()
{
const uint32_t cpuid = xPortGetCoreID();
// Re-enable cache on this CPU
spi_flash_restore_cache(cpuid, s_flash_op_cache_state[cpuid]);
// Re-enable non-iram interrupts
esp_intr_noniram_enable();
}
#else // CONFIG_FREERTOS_UNICORE
void spi_flash_init_lock()
{
}
void spi_flash_op_lock()
2016-08-17 11:08:22 -04:00
{
vTaskSuspendAll();
}
void spi_flash_op_unlock()
2016-08-17 11:08:22 -04:00
{
xTaskResumeAll();
}
void IRAM_ATTR spi_flash_disable_interrupts_caches_and_other_cpu()
{
esp_intr_noniram_disable();
spi_flash_op_lock();
spi_flash_disable_cache(0, &s_flash_op_cache_state[0]);
}
void IRAM_ATTR spi_flash_enable_interrupts_caches_and_other_cpu()
2016-08-17 11:08:22 -04:00
{
spi_flash_restore_cache(0, s_flash_op_cache_state[0]);
spi_flash_op_unlock();
esp_intr_noniram_enable();
2016-08-17 11:08:22 -04:00
}
void IRAM_ATTR spi_flash_disable_interrupts_caches_and_other_cpu_no_os()
{
// Kill interrupts that aren't located in IRAM
esp_intr_noniram_disable();
// Disable cache on this CPU as well
spi_flash_disable_cache(0, &s_flash_op_cache_state[0]);
}
void IRAM_ATTR spi_flash_enable_interrupts_caches_no_os()
{
// Re-enable cache on this CPU
spi_flash_restore_cache(0, s_flash_op_cache_state[0]);
// Re-enable non-iram interrupts
esp_intr_noniram_enable();
}
#endif // CONFIG_FREERTOS_UNICORE
2016-08-17 11:08:22 -04:00
/**
* The following two functions are replacements for Cache_Read_Disable and Cache_Read_Enable
* function in ROM. They are used to work around a bug where Cache_Read_Disable requires a call to
* Cache_Flush before Cache_Read_Enable, even if cached data was not modified.
*/
static const uint32_t cache_mask = DPORT_APP_CACHE_MASK_OPSDRAM | DPORT_APP_CACHE_MASK_DROM0 |
DPORT_APP_CACHE_MASK_DRAM1 | DPORT_APP_CACHE_MASK_IROM0 |
DPORT_APP_CACHE_MASK_IRAM1 | DPORT_APP_CACHE_MASK_IRAM0;
static void IRAM_ATTR spi_flash_disable_cache(uint32_t cpuid, uint32_t* saved_state)
{
uint32_t ret = 0;
if (cpuid == 0) {
ret |= GET_PERI_REG_BITS2(DPORT_PRO_CACHE_CTRL1_REG, cache_mask, 0);
while (GET_PERI_REG_BITS2(DPORT_PRO_DCACHE_DBUG0_REG, DPORT_PRO_CACHE_STATE, DPORT_PRO_CACHE_STATE_S) != 1) {
;
}
SET_PERI_REG_BITS(DPORT_PRO_CACHE_CTRL_REG, 1, 0, DPORT_PRO_CACHE_ENABLE_S);
} else {
ret |= GET_PERI_REG_BITS2(DPORT_APP_CACHE_CTRL1_REG, cache_mask, 0);
while (GET_PERI_REG_BITS2(DPORT_APP_DCACHE_DBUG0_REG, DPORT_APP_CACHE_STATE, DPORT_APP_CACHE_STATE_S) != 1) {
;
}
SET_PERI_REG_BITS(DPORT_APP_CACHE_CTRL_REG, 1, 0, DPORT_APP_CACHE_ENABLE_S);
}
*saved_state = ret;
}
static void IRAM_ATTR spi_flash_restore_cache(uint32_t cpuid, uint32_t saved_state)
{
if (cpuid == 0) {
SET_PERI_REG_BITS(DPORT_PRO_CACHE_CTRL_REG, 1, 1, DPORT_PRO_CACHE_ENABLE_S);
SET_PERI_REG_BITS(DPORT_PRO_CACHE_CTRL1_REG, cache_mask, saved_state, 0);
} else {
SET_PERI_REG_BITS(DPORT_APP_CACHE_CTRL_REG, 1, 1, DPORT_APP_CACHE_ENABLE_S);
SET_PERI_REG_BITS(DPORT_APP_CACHE_CTRL1_REG, cache_mask, saved_state, 0);
}
}