mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
cc1526c570
- Disable Kconfig option for Wifi if not supported by the SoC - Enable building mqtt examples when target is set to esp32h2
79 lines
3.3 KiB
Markdown
79 lines
3.3 KiB
Markdown
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-H2 | ESP32-S2 | ESP32-S3 |
|
|
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
|
|
|
# ESP-MQTT SSL example with PSK verification
|
|
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
This example connects to a local broker configured to PSK authentication
|
|
|
|
## How to use example
|
|
|
|
### Hardware Required
|
|
|
|
This example can be executed on any ESP32 board, the only required interface is WiFi (or ethernet) to connect to a MQTT
|
|
broker with preconfigured PSK verification method.
|
|
|
|
#### Mosquitto settings
|
|
In case of using mosquitto broker, here is how to enable PSK authentication in `mosquitto.config`,
|
|
```
|
|
psk_hint hint
|
|
psk_file path_to_your_psk_file
|
|
allow_anonymous true
|
|
```
|
|
Note: Last line enables anonymous mode, as this example does not use mqtt username and password.
|
|
|
|
PSK file then has to contain pairs of hints and keys, as shown below:
|
|
```
|
|
hint:BAD123
|
|
```
|
|
|
|
Important note: Keys are stored as text hexadecimal values in PSK file, while the example code stores key as plain binary
|
|
as required by MQTT API. (See the example source for details: `"BAD123" -> 0xBA, 0xD1, 0x23`)
|
|
|
|
### Configure the project
|
|
|
|
* Run `idf.py menuconfig`
|
|
* Configure Wi-Fi or Ethernet under "Example Connection Configuration" menu. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
|
|
|
|
### Build and Flash
|
|
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example Output
|
|
|
|
```
|
|
I (2160) example_connect: Ethernet Link Up
|
|
I (4650) example_connect: Connected to Ethernet
|
|
I (4650) example_connect: IPv4 address: 192.168.0.1
|
|
I (4650) MQTTS_EXAMPLE: [APP] Free memory: 244792 bytes
|
|
I (4660) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
|
|
D (4670) MQTT_CLIENT: MQTT client_id=ESP32_c6B4F8
|
|
D (4680) MQTT_CLIENT: Core selection disabled
|
|
I (4680) MQTTS_EXAMPLE: Other event id:7
|
|
D (4680) esp-tls: host:192.168.0.2: strlen 13
|
|
D (4700) esp-tls: ssl psk authentication
|
|
D (4700) esp-tls: handshake in progress...
|
|
D (4720) MQTT_CLIENT: Transport connected to mqtts://192.168.0.2:8883
|
|
I (4720) MQTT_CLIENT: Sending MQTT CONNECT message, type: 1, id: 0000
|
|
D (4720) MQTT_CLIENT: mqtt_message_receive: first byte: 0x20
|
|
D (4730) MQTT_CLIENT: mqtt_message_receive: read "remaining length" byte: 0x2
|
|
D (4730) MQTT_CLIENT: mqtt_message_receive: total message length: 4 (already read: 2)
|
|
D (4740) MQTT_CLIENT: mqtt_message_receive: read_len=2
|
|
D (4750) MQTT_CLIENT: mqtt_message_receive: transport_read():4 4
|
|
D (4750) MQTT_CLIENT: Connected
|
|
I (4760) MQTTS_EXAMPLE: MQTT_EVENT_CONNECTED
|
|
D (4760) MQTT_CLIENT: mqtt_enqueue id: 4837, type=8 successful
|
|
D (4770) OUTBOX: ENQUEUE msgid=4837, msg_type=8, len=18, size=18
|
|
D (4770) MQTT_CLIENT: Sent subscribe topic=/topic/qos0, id: 4837, type=8 successful
|
|
I (4780) MQTTS_EXAMPLE: sent subscribe successful, msg_id=4837
|
|
D (4790) MQTT_CLIENT: mqtt_enqueue id: 58982, type=8 successful
|
|
D (4790) OUTBOX: ENQUEUE msgid=58982, msg_type=8, len=18, size=36
|
|
D (4800) MQTT_CLIENT: Sent subscribe topic=/topic/qos1, id: 58982, type=8 successful
|
|
I (4810) MQTTS_EXAMPLE: sent subscribe successful, msg_id=58982
|
|
```
|
|
|