Armando 86b331b40f soc: update iram/dram addr range in ext_mem_defs.h ... IRAM0/DRAM0 addr range update, on s3, c3, c2, h4, c6: IRAM0_ADDRESS_LOW ~ IRAM0_ADDRESS_HIGH DRAM0_ADDRESS_LOW ~ DRAM0_ADDRESS_HIGH now are for the real IRAM0 and DRAM0		2023-02-23 12:39:54 +08:00
..
include/soc	soc: update iram/dram addr range in ext_mem_defs.h	2023-02-23 12:39:54 +08:00
ld	usb_host: Rename struct/ll/hal symbols to use "usb_dwc" prefix	2023-01-09 17:48:09 +08:00
adc_periph.c	adc: fix adc1 channel 8 and 9 not defined bug on s3	2021-12-08 18:21:28 +08:00
CMakeLists.txt	usb: Allow settings of all signals in usb_phy	2022-10-25 06:44:55 +02:00
dedic_gpio_periph.c	dedic_gpio: support on esp32s3	2021-06-30 18:10:54 +08:00
gdma_periph.c	gdma: support IRAM interrupt	2021-11-08 16:14:51 +08:00
gpio_periph.c	gpio: Fix ESP32S3 GPIO48 does not support hold function bug	2022-07-15 16:51:25 +08:00
i2c_periph.c	Whitespace: Automated whitespace fixes (large commit)	2020-11-11 07:36:35 +00:00
i2s_periph.c	i2s: add basic examples for STD/TDM/PDM mode	2022-07-21 15:52:39 +08:00
interrupts.c	esp32s3: fix interrupt names used by SystemView	2022-08-17 12:48:37 +02:00
lcd_periph.c	lcd: unify callback prototype	2021-10-02 14:23:31 +08:00
ledc_periph.c	Whitespace: Automated whitespace fixes (large commit)	2020-11-11 07:36:35 +00:00
mcpwm_periph.c	mcpwm: clean up hal driver and add doc	2022-06-02 15:01:18 +08:00
pcnt_periph.c	pulse_cnt: new driver for PCNT peripheral	2022-03-03 22:38:32 +08:00
rmt_periph.c	rmt: document and improve LL driver	2022-03-09 10:58:12 +08:00
rtc_io_periph.c	gpio:support gpio in/out/interrupt for esp32s3(728)	2021-06-28 11:44:14 +08:00
sdio_slave_periph.c	soc: descriptive part occupy whole component	2020-10-28 07:21:29 +08:00
sdm_periph.c	sdm: clean up soc/hal/ll code	2022-07-20 14:59:50 +08:00
sdmmc_periph.c	soc: add esp32s3 sdmmc support	2021-05-10 23:21:27 +02:00
spi_periph.c	spi_master:fix error when use spi_bus_add_device more than 3 device	2022-09-09 15:57:13 +08:00
temperature_sensor_periph.c	temperature_sensor: Add temperature sensor support for ESP32-C2	2022-06-23 15:36:43 +08:00
timer_periph.c	gptimer: clean up hal and ll for driver-ng	2021-10-20 18:40:08 +08:00
touch_sensor_periph.c	soc: added SOC_TOUCH_SENSE_SUPPORTED macro	2022-07-22 00:12:36 +00:00
uart_periph.c	uart: uart_set_pin function will now use IOMUX whenever possible	2021-08-04 12:48:30 +08:00
usb_otg_periph.c	usb: Allow settings of all signals in usb_phy	2022-10-25 06:44:55 +02:00
usb_periph.c	soc/hal: add tinyusb support esp32s3	2021-05-06 16:20:54 +08:00