mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
96 lines
3.4 KiB
Markdown
96 lines
3.4 KiB
Markdown
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-S3 |
|
|
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
|
|
|
# ESP-IDF BT/BLE HID Device Demo
|
|
|
|
This demo use APIs which esp_hid component provided to create a BT, BLE or Bluetooth dual mode hid device. Users can choose mode by setting `HID_DEV_MODE`.
|
|
|
|
|
|
This example works in companion with the [BLE HID Host Example](../esp_hid_host/README.md)
|
|
|
|
## How to Use Example
|
|
|
|
Before project configuration and build, be sure to set the correct chip target using:
|
|
|
|
```bash
|
|
idf.py set-target <chip_name>
|
|
```
|
|
The BT hid device plays as a mouse. When the connection is successfully established, users can follow the usage below to operate the 'mouse'.
|
|
|
|
```
|
|
########################################################################
|
|
BT hid mouse demo usage:
|
|
You can input these value to simulate mouse: 'q', 'w', 'e', 'a', 's', 'd', 'h'
|
|
q -- click the left key
|
|
w -- move up
|
|
e -- click the right key
|
|
a -- move left
|
|
s -- move down
|
|
d -- move right
|
|
h -- show the help
|
|
########################################################################
|
|
```
|
|
|
|
The BLE hid device plays as a remote control. When the connection is successfully established, the remote control will set volume up and down periodically.
|
|
This example implements a BLE HID device.
|
|
|
|
### Hardware Required
|
|
|
|
* A development board with ESP32 SoC (e.g., ESP32-DevKitC, ESP-WROVER-KIT, etc.)
|
|
* A USB cable for Power supply and programming
|
|
|
|
See [Development Boards](https://www.espressif.com/en/products/devkits) for more information about it.
|
|
|
|
### Configure the Project
|
|
|
|
### Build and Flash
|
|
|
|
Build the project and flash it to the board, then run monitor tool to view serial output.
|
|
|
|
```
|
|
idf.py -p PORT flash monitor
|
|
```
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the [Getting Started Guide](https://idf.espressif.com/) for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example Output
|
|
|
|
```
|
|
I (0) cpu_start: Starting scheduler on APP CPU.
|
|
I (607) BTDM_INIT: BT controller compile version [d03a5d3]
|
|
I (607) system_api: Base MAC address is not set
|
|
I (607) system_api: read default base MAC address from EFUSE
|
|
I (617) phy_init: phy_version 4670,719f9f6,Feb 18 2021,17:07:07
|
|
W (1337) BT_BTM: BTM_BleWriteAdvData, Partial data write into ADV
|
|
I (1357) HID_DEV_DEMO: START
|
|
I (25067) HID_DEV_DEMO: CONNECT
|
|
I (25357) HID_DEV_DEMO: Send the volume
|
|
E (25437) BT_SMP: Value for numeric comparison = 125657
|
|
I (25437) ESP_HID_GAP: BLE GAP NC_REQ passkey:125657
|
|
W (25517) BT_SMP: FOR LE SC LTK IS USED INSTEAD OF STK
|
|
I (25587) ESP_HID_GAP: BLE GAP KEY type = ESP_LE_KEY_LENC
|
|
I (25587) ESP_HID_GAP: BLE GAP KEY type = ESP_LE_KEY_PENC
|
|
I (25587) ESP_HID_GAP: BLE GAP KEY type = ESP_LE_KEY_LID
|
|
I (25647) ESP_HID_GAP: BLE GAP KEY type = ESP_LE_KEY_PID
|
|
I (25757) ESP_HID_GAP: BLE GAP AUTH SUCCESS
|
|
I (27457) HID_DEV_DEMO: Send the volume
|
|
I (29557) HID_DEV_DEMO: Send the volume
|
|
I (31657) HID_DEV_DEMO: Send the volume
|
|
I (33757) HID_DEV_DEMO: Send the volume
|
|
I (35857) HID_DEV_DEMO: Send the volume
|
|
I (37957) HID_DEV_DEMO: Send the volume
|
|
I (40057) HID_DEV_DEMO: Send the volume
|
|
I (42157) HID_DEV_DEMO: Send the volume
|
|
I (44257) HID_DEV_DEMO: Send the volume
|
|
I (46357) HID_DEV_DEMO: Send the volume
|
|
I (48457) HID_DEV_DEMO: Send the volume
|
|
I (50557) HID_DEV_DEMO: Send the volume
|
|
...
|
|
```
|
|
|
|
## Troubleshooting
|
|
|
|
For any technical queries, please open an [issue](https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
|