mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
66 lines
3.1 KiB
Markdown
66 lines
3.1 KiB
Markdown
| Supported Targets | ESP32 | ESP32-S2 | ESP32-S3 | ESP32-C3 |
|
|
| ----------------- | ----- | -------- | -------- | -------- |
|
|
|
|
|
|
# Asio chat client and server examples
|
|
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
The application aims to demonstrate a simple use of Asio library in different modes.
|
|
In project settings it could be configured to run either a Asio chat server, a Asio chat client, or both.
|
|
|
|
## How to use example
|
|
|
|
The example is configured by default as an Asio chat client.
|
|
|
|
Note that the example uses string representation of IP addresses and ports.
|
|
|
|
You can find the upstream asio chat implementation [here] https://github.com/chriskohlhoff/asio/tree/master/asio/src/examples/cpp11/chat
|
|
|
|
### Asio Client
|
|
|
|
In the client mode, the example connects to the configured address, sends the message, which was inserted as an input in the terminal, and receives a response.
|
|
|
|
### Asio Server
|
|
|
|
In the server mode, Asio chat server with a specified port number is created and being polled till a connection request from the client arrives.
|
|
Chat server echoes a message (received from any client) to all connected clients.
|
|
|
|
## Configure the project
|
|
|
|
```
|
|
idf.py menuconfig
|
|
```
|
|
|
|
Set following parameters under Example Configuration Options:
|
|
|
|
* Set `EXAMPLE_CHAT_SERVER` to use the example as an ASIO chat server
|
|
* Configure `EXAMPLE_CHAT_SERVER_BIND_PORT` to the port number.
|
|
|
|
* Set `EXAMPLE_CHAT_CLIENT` to use the example as an ASIO chat client
|
|
* Configure `EXAMPLE_CHAT_CLIENT_CONNECT_ADDRESS` to a string representation of the address to connect the client to.
|
|
* Configure `EXAMPLE_CHAT_CLIENT_CONNECT_PORT` to the port number.
|
|
|
|
* Configure Wi-Fi or Ethernet under "Example Connection Configuration" menu. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more d etails.
|
|
|
|
## Running the example in server mode
|
|
|
|
- Configure the example according "Configure the project" section.
|
|
- Run `idf.py -p PORT flash monitor` to build and upload the example to your board and connect to it's serial terminal.
|
|
- Wait for the board to connect to WiFi or Ethernet (note the IP address).
|
|
- Connect to the server using multiple clients, for example using any option below.
|
|
- build and run asio chat client on your host machine
|
|
- run chat_client asio example on ESP platform
|
|
- since chat messages consists of ASCII size and message, it is possible to
|
|
netcat `nc IP PORT` and type for example ` 4ABC<CR>` to transmit 'ABC\n'
|
|
|
|
## Running the example in client mode
|
|
|
|
- Configure the example according "Configure the project" section.
|
|
- Start chat server either on host machine or as another ESP device running chat_server example.
|
|
- Run `idf.py -p PORT flash monitor` to build and upload the example to your board and connect to it's serial terminal.
|
|
- Wait for the board to connect to WiFi or Ethernet.
|
|
- Receive and send messages to/from other clients on stdin/stdout via serial terminal.
|
|
|
|
See the README.md file in the upper level 'examples' directory for more information about examples.
|