esp-idf/examples/protocols/https_server/wss_server/README.md
Euripedes Rocha cc1526c570 protocols/examples: Disable Wifi connection if not supported
- Disable Kconfig option for Wifi if not supported by the SoC
- Enable building mqtt examples when target is set to esp32h2
2023-07-12 06:19:20 +00:00

65 lines
2.5 KiB
Markdown

| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-H2 | ESP32-S2 | ESP32-S3 |
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
# HTTP Websocket server with SSL support
This example creates a SSL server and employs a simple Websocket request handler. It demonstrates handling multiple clients from the server including:
* PING-PONG mechanism
* Sending asynchronous messages to all clients
See the `esp_https_server` component documentation for details.
### Websocket support in `http_server`
Please refer to the documentation of [Websocket server](https://docs.espressif.com/projects/esp-idf/en/latest/api-reference/protocols/esp_http_server.html#websocket-server) feature in the documentation,
or to the description of using websocket handlers in httpd in the [simple ws echo](../../http_server/ws_echo_server/README.md#how-to-use-example) example.
## How to use example
Before project configuration and build, be sure to set the correct chip target using `idf.py set-target <chip_name>`.
### Hardware Required
* A development board with ESP32/ESP32-S2/ESP32-C3 SoC (e.g., ESP32-DevKitC, ESP-WROVER-KIT, etc.)
* A USB cable for power supply and programming
### Configure the project
```
idf.py menuconfig
```
Open the project configuration menu (`idf.py menuconfig`) to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
### Build and Flash
Build the project and flash it to the board, then run monitor tool to view serial output:
```
idf.py -p PORT flash monitor
```
(Replace PORT with the name of the serial port to use.)
(To exit the serial monitor, type ``Ctrl-]``.)
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
## Certificates
You will need to approve a security exception in your browser. This is because of a self signed
certificate; this will be always the case, unless you preload the CA root into your browser/system
as trusted.
You can generate a new certificate using the OpenSSL command line tool:
```
openssl req -newkey rsa:2048 -nodes -keyout prvtkey.pem -x509 -days 3650 -out cacert.pem -subj "/CN=ESP32 HTTPS server example"
```
Expiry time and metadata fields can be adjusted in the invocation.
Please see the openssl man pages (man openssl-req) for more details.
It is **strongly recommended** to not reuse the example certificate in your application;
it is included only for demonstration.