mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
99 lines
5.3 KiB
Markdown
99 lines
5.3 KiB
Markdown
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-H2 | ESP32-S3 |
|
|
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
|
|
|
# BLE Peripheral Example
|
|
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
This example creates GATT server and then starts advertising, waiting to be connected to a GATT client.
|
|
|
|
It uses ESP32's Bluetooth controller and NimBLE stack based BLE host.
|
|
|
|
This example aims at understanding GATT database configuration, handling GATT reads and writes, handling subscribe events, understanding advertisement and SMP related NimBLE APIs.
|
|
|
|
It also demonstrates security features of NimBLE stack. SMP parameters like I/O capabilities of device, Bonding flag, MITM protection flag and Secure Connection only mode, Enabling Link Encryption etc., can be configured through menuconfig options.
|
|
|
|
For RPA feature (currently Host based privacy feature is supported), use API `ble_hs_pvcy_rpa_config` to enable/disable host based privacy, `own_addr_type` needs to be set to `BLE_ADDR_RANDOM` to use this feature. Please include `ble_hs_pvcy.h` while using this API. As `ble_hs_pvcy_rpa_config` configures host privacy and sets address in controller, it is necessary to call this API after host-controller are synced (e.g. in `bleprph_on_sync` callback).
|
|
|
|
To test this demo, any BLE scanner app can be used.
|
|
|
|
Note :
|
|
|
|
* To install the dependency packages needed, please refer to the top level [README file](../../../README.md#running-test-python-script-ttfw).
|
|
* Currently this Python utility is only supported on Linux (BLE communication is via BLuez + DBus).
|
|
|
|
## How to Use Example
|
|
|
|
Before project configuration and build, be sure to set the correct chip target using:
|
|
|
|
```bash
|
|
idf.py set-target <chip_name>
|
|
```
|
|
|
|
### Configure the project
|
|
|
|
Open the project configuration menu:
|
|
|
|
```bash
|
|
idf.py menuconfig
|
|
```
|
|
|
|
In the `Example Configuration` menu:
|
|
|
|
* Select I/O capabilities of device from `Example Configuration --> I/O Capability`, default is `Just_works`.
|
|
* Enable/Disable other security related parameters `Bonding, MITM option, secure connection(SM SC)`.
|
|
|
|
### Build and Flash
|
|
|
|
Run `idf.py -p PORT flash monitor` to build, flash and monitor the project.
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the [Getting Started Guide](https://idf.espressif.com/) for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example Output
|
|
|
|
There is this console output when bleprph is connected and characteristic is read:
|
|
|
|
```
|
|
I (118) BTDM_INIT: BT controller compile version [fe7ced0]
|
|
I (118) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
|
|
W (128) phy_init: failed to load RF calibration data (0xffffffff), falling back to full calibration
|
|
I (268) phy: phy_version: 4100, 6fa5e27, Jan 25 2019, 17:02:06, 0, 2
|
|
I (508) NimBLE_BLE_PRPH: BLE Host Task Started
|
|
I (508) uart: queue free spaces: 8
|
|
GAP procedure initiated: stop advertising.
|
|
Device Address: xx:xx:xx:xx:xx:xx
|
|
GAP procedure initiated: advertise; disc_mode=2 adv_channel_map=0 own_addr_type=0 adv_filter_policy=0 adv_itvl_min=0 adv_itvl_max=0
|
|
connection established; status=0 handle=0 our_ota_addr_type=0 our_ota_addr=xx:xx:xx:xx:xx:xx our_id_addr_type=0 our_id_addr=xx:xx:xx:xx:xx:xx peer_ota_addr_type=1 peer_ota_addr=xx:xx:xx:xx:xx:xx peer_id_addr_type=1 peer_id_addr=xx:xx:xx:xx:xx:xx conn_itvl=39 conn_latency=0 supervision_timeout=500 encrypted=0 authenticated=0 bonded=0
|
|
|
|
connection updated; status=0 handle=0 our_ota_addr_type=0 our_ota_addr=xx:xx:xx:xx:xx:xx our_id_addr_type=0 our_id_addr=xx:xx:xx:xx:xx:xx peer_ota_addr_type=1 peer_ota_addr=xx:xx:xx:xx:xx:xx peer_id_addr_type=1 peer_id_addr=xx:xx:xx:xx:xx:xx conn_itvl=6 conn_latency=0 supervision_timeout=500 encrypted=0 authenticated=0 bonded=0
|
|
|
|
I (50888) NimBLE_BLE_PRPH: PASSKEY_ACTION_EVENT started
|
|
|
|
I (50888) NimBLE_BLE_PRPH: Passkey on device's display: xxxxxx
|
|
I (50888) NimBLE_BLE_PRPH: Accept or reject the passkey through console in this format -> key Y or key N
|
|
key Y
|
|
I (50898) NimBLE_BLE_PRPH: ble_sm_inject_io result: 0
|
|
|
|
encryption change event; status=0 handle=0 our_ota_addr_type=0 our_ota_addr=xx:xx:xx:xx:xx:xx our_id_addr_type=0 our_id_addr=xx:xx:xx:xx:xx:xx peer_ota_addr_type=1 peer_ota_addr=xx:xx:xx:xx:xx:xx peer_id_addr_type=1
|
|
peer_id_addr=xx:xx:xx:xx:xx:xx conn_itvl=6 conn_latency=0 supervision_timeout=500 encrypted=1 authenticated=1 bonded=1
|
|
|
|
connection updated; status=0 handle=0 our_ota_addr_type=0 our_ota_addr=xx:xx:xx:xx:xx:xx our_id_addr_type=0 our_id_addr=xx:xx:xx:xx:xx:xx
|
|
peer_ota_addr_type=1 peer_ota_addr=xx:xx:xx:xx:xx:xx peer_id_addr_type=1 peer_id_addr=xx:xx:xx:xx:xx:xx conn_itvl=39 conn_latency=0 supervision_timeout=500 encrypted=1 authenticated=1 bonded=1
|
|
|
|
subscribe event; conn_handle=1 attr_handle=19 reason=1 prevn=0 curn=1 previ=0 curi=0
|
|
Subscribe to attribute (19) successful
|
|
subscribe event; conn_handle=1 attr_handle=25 reason=1 prevn=0 curn=1 previ=0 curi=0
|
|
Subscribe to attribute (25) successful
|
|
GATT procedure initiated: notify; att_handle=25
|
|
Notification sent succesfully
|
|
```
|
|
|
|
## Note
|
|
* NVS support is not yet integrated to bonding. So, for now, bonding is not persistent across reboot.
|
|
|
|
## Troubleshooting
|
|
|
|
For any technical queries, please open an [issue](https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
|