mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
84 lines
3.7 KiB
Markdown
84 lines
3.7 KiB
Markdown
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
|
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
|
|
|
# Wi-Fi WPS Example
|
|
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
This example shows how to use WPS enrollee in ESP. The WPS protocol simplifies the process of connecting to a Wi-Fi router.
|
|
|
|
## How to use example
|
|
|
|
Before project configuration and build, be sure to set the correct chip target using `idf.py set-target <chip_name>`.
|
|
|
|
### Hardware Required
|
|
|
|
* A development board with ESP32/ESP32-S2/ESP32-C3/ESP32-S3/ESP32-C2 SoC (e.g., ESP32-DevKitC, ESP-WROVER-KIT, etc.)
|
|
* A USB cable for Power supply and programming
|
|
|
|
### Configure the project
|
|
|
|
Open the project configuration menu (`idf.py menuconfig`).
|
|
|
|
In the `Example Configuration` menu:
|
|
|
|
* Use `WPS mode` to select the type.
|
|
* Select `PBC`, `PIN` or `disable`.
|
|
|
|
In `PBC` mode, the ESP will wait for the WPS initialization (usually by pressing WPS button on the Wi-Fi router) and then will connect to the router.
|
|
|
|
In `PIN` mode, the ESP will enter the WPS mode and you'll see a pin code on the terminal. Enter this pin code in your router and then the ESP will connect to it.
|
|
|
|
(See your router manual and configuration for WPS compatibility.)
|
|
|
|
### Build and Flash
|
|
|
|
Build the project and flash it to the board, then run the monitor tool to view the serial output:
|
|
|
|
Run `idf.py -p PORT flash monitor` to build, flash and monitor the project.
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the Getting Started Guide for all the steps to configure and use the ESP-IDF to build projects.
|
|
|
|
* [ESP-IDF Getting Started Guide on ESP32](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/get-started/index.html)
|
|
* [ESP-IDF Getting Started Guide on ESP32-S2](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s2/get-started/index.html)
|
|
* [ESP-IDF Getting Started Guide on ESP32-C3](https://docs.espressif.com/projects/esp-idf/en/latest/esp32c3/get-started/index.html)
|
|
* [ESP-IDF Getting Started Guide on ESP32-S3](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/get-started/index.html)
|
|
* [ESP-IDF Getting Started Guide on ESP32-C2](https://docs.espressif.com/projects/esp-idf/en/latest/esp32c2/get-started/index.html)
|
|
|
|
|
|
## Example Output
|
|
|
|
As you run the example, you will see the following log:
|
|
|
|
```
|
|
I (814) example_wps: start wps...
|
|
I (814) example_wps: WIFI_EVENT_STA_START
|
|
I (7304) wifi:new:<5,1>, old:<1,0>, ap:<255,255>, sta:<5,1>, prof:1
|
|
I (8084) wifi:state: init -> auth (b0)
|
|
I (8094) wifi:state: auth -> assoc (0)
|
|
I (8104) wifi:state: assoc -> run (10)
|
|
I (8904) wifi:state: run -> init (17a0)
|
|
I (8904) wifi:new:<5,0>, old:<5,1>, ap:<255,255>, sta:<5,1>, prof:1
|
|
I (8914) example_wps: WIFI_EVENT_STA_DISCONNECTED
|
|
E (8914) wifi:sta is connecting, return error
|
|
I (9904) example_wps: WIFI_EVENT_STA_WPS_ER_SUCCESS
|
|
I (9914) wifi:new:<5,1>, old:<5,0>, ap:<255,255>, sta:<5,1>, prof:1
|
|
I (10654) wifi:state: init -> auth (b0)
|
|
I (10664) wifi:state: auth -> assoc (0)
|
|
I (10664) wifi:state: assoc -> run (10)
|
|
I (10704) wifi:connected with ROUTER_SSID, aid = 3, channel 5, 40U, bssid = xx:xx:xx:xx:xx:xx
|
|
I (10704) wifi:security: WPA2-PSK, phy: bgn, rssi: -58
|
|
I (10714) wifi:pm start, type: 1
|
|
|
|
I (10734) wifi:AP's beacon interval = 102400 us, DTIM period = 1
|
|
W (11104) wifi:<ba-add>idx:0 (ifx:0, xx:xx:xx:xx:xx:xx), tid:0, ssn:0, winSize:64
|
|
I (12094) esp_netif_handlers: sta ip: 192.168.68.113, mask: 255.255.255.0, gw: 192.168.68.1
|
|
I (12094) example_wps: got ip: 192.168.68.113
|
|
```
|
|
|
|
## Troubleshooting
|
|
|
|
For any technical queries, please open an [issue](https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
|