mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
68 lines
3.1 KiB
Markdown
68 lines
3.1 KiB
Markdown
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
|
|
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- | -------- | -------- |
|
|
|
|
# I2C OLED example
|
|
|
|
[esp_lcd](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/peripherals/lcd.html) supports I2C interfaced OLED LCD, whose color depth is usually 1bpp.
|
|
|
|
This example shows how to make use of the SSD1306 panel driver from `esp_lcd` component to facilitate the porting of LVGL library. In the end, example will display a scrolling text on the OLED screen. For more information about porting the LVGL library, you can also refer to another [lvgl porting example](../i80_controller/README.md).
|
|
|
|
## How to use the example
|
|
|
|
### Hardware Required
|
|
|
|
* An ESP development board
|
|
* An SSD1306 OLED LCD, with I2C interface
|
|
* An USB cable for power supply and programming
|
|
|
|
### Hardware Connection
|
|
|
|
The connection between ESP Board and the LCD is as follows:
|
|
|
|
```text
|
|
ESP Board OLED LCD (I2C)
|
|
+------------------+ +-------------------+
|
|
| GND+--------------+GND |
|
|
| | | |
|
|
| 3V3+--------------+VCC |
|
|
| | | |
|
|
| SDA+--------------+SDA |
|
|
| | | |
|
|
| SCL+--------------+SCL |
|
|
+------------------+ +-------------------+
|
|
```
|
|
|
|
The GPIO number used by this example can be changed in [lvgl_example_main.c](main/i2c_oled_example_main.c). Please pay attention to the I2C hardware device address as well, you should refer to your module's spec and schematic to determine that address.
|
|
|
|
### Build and Flash
|
|
|
|
Run `idf.py -p PORT build flash monitor` to build, flash and monitor the project. A scrolling text will show up on the LCD as expected.
|
|
|
|
The first time you run `idf.py` for the example will cost extra time as the build system needs to address the component dependencies and downloads the missing components from registry into `managed_components` folder.
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the [Getting Started Guide](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/index.html) for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
### Example Output
|
|
|
|
```bash
|
|
...
|
|
I (308) main_task: Started on CPU0
|
|
I (318) main_task: Calling app_main()
|
|
I (318) example: Initialize I2C bus
|
|
I (318) gpio: GPIO[3]| InputEn: 1| OutputEn: 1| OpenDrain: 1| Pullup: 1| Pulldown: 0| Intr:0
|
|
I (328) gpio: GPIO[4]| InputEn: 1| OutputEn: 1| OpenDrain: 1| Pullup: 1| Pulldown: 0| Intr:0
|
|
I (338) example: Install panel IO
|
|
I (338) example: Install SSD1306 panel driver
|
|
I (448) example: Initialize LVGL
|
|
I (448) LVGL: Starting LVGL task
|
|
I (448) example: Display LVGL Scroll Text
|
|
I (448) main_task: Returned from app_main()
|
|
...
|
|
```
|
|
|
|
## Troubleshooting
|
|
|
|
For any technical queries, please open an [issue](https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
|