mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
86 lines
3.9 KiB
Markdown
86 lines
3.9 KiB
Markdown
# ESP-MQTT advanced published test
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
Main purpose of this example is to test the MQTT library to correctly publish and receive messages (of different size and sequences) over different transports.
|
|
It is possible to run this example manually without any test to exercise how the MQTT library deals with
|
|
|
|
- reception of fragmented messages
|
|
- runtime updates of URI
|
|
|
|
## How to use example
|
|
|
|
This example waits for user input to provide these parameters:
|
|
- transport: string parameter, one of: tcp, ssl, ws, wss
|
|
- pattern: sample string to be transmitted as message
|
|
- pattern repeats: number of repeats of pattern in one MQTT message
|
|
- repeated: number of repeats ESP32 publishes the message, also ESP32 expects to receive the same message the same number of repeats
|
|
- qos: number specifying qos, one of: 0, 1, 2
|
|
|
|
### Hardware Required
|
|
|
|
This example can be executed on any ESP32 board, the only required interface is WiFi and connection to internet.
|
|
|
|
### Configure the project
|
|
|
|
* Open the project configuration menu (`idf.py menuconfig`)
|
|
* Configure Wi-Fi or Ethernet under "Example Connection Configuration" menu. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
|
|
* When using Make build system, set `Default serial port` under `Serial flasher config`.
|
|
* Set brokers for all 4 transports (TCP, SSL, WS, WSS), also set certificate if needed
|
|
* Set topics for publishing from and to ESP32
|
|
|
|
### Build and Flash
|
|
|
|
Build the project and flash it to the board, then run monitor tool to view serial output:
|
|
|
|
```
|
|
make -j4 flash monitor
|
|
```
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example Output
|
|
|
|
```
|
|
I (4730) event: sta ip: 192.168.0.125, mask: 255.255.255.0, gw: 192.168.0.2
|
|
I (4730) PUBLISH_TEST: [APP] Free memory: 236728 bytes
|
|
I (4730) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
|
|
D (4740) MQTT_CLIENT: MQTT client_id=ESP32_09885C
|
|
I (31360) PUBLISH_TEST: PATTERN:1234 REPEATED:10 PUBLISHED:10
|
|
```
|
|
- User enters "tcp 1234 10 10 1"
|
|
```
|
|
EXPECTED STRING 1234123412341234123412341234123412341234, SIZE:40
|
|
W (31360) MQTT_CLIENT: Client asked to stop, but was not started
|
|
I (31360) PUBLISH_TEST: [TCP transport] Startup..
|
|
D (31370) MQTT_CLIENT: Core selection disabled
|
|
I (31370) PUBLISH_TEST: Note free memory: 224652 bytes
|
|
I (31370) PUBLISH_TEST: Other event id:7
|
|
D (31390) MQTT_CLIENT: Transport connected to mqtt://192.168.0.163:1883
|
|
I (31400) MQTT_CLIENT: Sending MQTT CONNECT message, type: 1, id: 0000
|
|
D (31410) MQTT_CLIENT: Connected
|
|
I (31410) PUBLISH_TEST: MQTT_EVENT_CONNECTED
|
|
D (31410) MQTT_CLIENT: mqtt_enqueue id: 31184, type=8 successful
|
|
D (31410) OUTBOX: ENQUEUE msgid=31184, msg_type=8, len=20, size=20
|
|
D (31420) MQTT_CLIENT: Sent subscribe topic=/xxx.topic123, id: 31184, type=8 successful
|
|
I (31430) PUBLISH_TEST: sent subscribe successful, msg_id=31184
|
|
D (31440) MQTT_CLIENT: mqtt_enqueue id: 16584, type=3 successful
|
|
D (31440) OUTBOX: ENQUEUE msgid=16584, msg_type=3, len=59, size=79
|
|
I (31450) PUBLISH_TEST: [16584] Publishing...
|
|
D (31450) MQTT_CLIENT: msg_type=9, msg_id=31184
|
|
D (31460) MQTT_CLIENT: pending_id=16584, pending_msg_count = 2
|
|
D (31460) OUTBOX: DELETED msgid=31184, msg_type=8, remain size=59
|
|
D (31470) MQTT_CLIENT: Subscribe successful
|
|
I (31470) PUBLISH_TEST: MQTT_EVENT_SUBSCRIBED, msg_id=31184
|
|
D (31480) MQTT_CLIENT: msg_type=4, msg_id=16584
|
|
D (31480) MQTT_CLIENT: pending_id=16584, pending_msg_count = 1
|
|
D (31490) OUTBOX: DELETED msgid=16584, msg_type=3, remain size=0
|
|
D (31500) MQTT_CLIENT: received MQTT_MSG_TYPE_PUBACK, finish QoS1 publish
|
|
I (31500) PUBLISH_TEST: MQTT_EVENT_PUBLISHED, msg_id=16584
|
|
D (31510) MQTT_CLIENT: mqtt_enqueue id: 44615, type=3 successful
|
|
D (31520) OUTBOX: ENQUEUE msgid=44615, msg_type=3, len=59, size=59
|
|
I (31530) PUBLISH_TEST: [44615] Publishing...
|
|
...
|
|
```
|