mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
74 lines
4.3 KiB
Markdown
74 lines
4.3 KiB
Markdown
# Examples
|
|
|
|
This directory contains a range of example ESP-IDF projects. These examples are intended to demonstrate parts of the ESP-IDF functionality, and to provide code that you can copy and adapt into your own projects.
|
|
|
|
## Example Layout
|
|
|
|
The examples are grouped into subdirectories by category. Each category directory contains one or more example projects:
|
|
|
|
- `bluetooth/bluedroid` Classic BT, BLE and coex examples using default Bluedroid host stack.
|
|
- `bluetooth/nimble` BLE examples using NimBLE host stack.
|
|
- `bluetooth/esp_ble_mesh` ESP BLE Mesh examples.
|
|
- `bluetooth/hci` HCI transport (VHCI and HCI UART) examples.
|
|
- `build_system` Examples of build system features.
|
|
- `cxx` C++ language utilization examples and experimental components.
|
|
- `ethernet` Ethernet network examples.
|
|
- `get-started` Simple examples with minimal functionality. Good start point for beginners.
|
|
- `mesh` Wi-Fi Mesh examples.
|
|
- `network` Examples related to general network environment, test & analysis.
|
|
- `openthread` OpenThread examples.
|
|
- `peripherals` Examples showing driver functionality for the various onboard ESP32 peripherals.
|
|
- `protocols` Examples showing network protocol interactions.
|
|
- `provisioning` Wi-Fi provisioning examples.
|
|
- `security` Examples about security features.
|
|
- `storage` Examples showing data storage methods using SPI flash, external storage like the SD/MMC interface and flash partitioning.
|
|
- `system` Demonstrates some internal chip features, or debugging & development tools.
|
|
- `wifi` Advanced Wi-Fi features (For network protocol examples, see `protocols` instead.)
|
|
- `Zigbee` Zigbee network and device examples.
|
|
|
|
In addition to these examples, `commmon_components` directory contains code shared by several examples.
|
|
|
|
## Using Examples
|
|
|
|
Before building an example, be sure to follow the [ESP-IDF Getting Started Guide](https://idf.espressif.com/) to ensure you have the required development environment.
|
|
|
|
Building an example is the same as building any other project:
|
|
|
|
- Change into the directory of the new example you'd like to build.
|
|
- Run `idf.py set-target TARGET` to select the correct chip target to build before opening the project configuration menu. By default the target is `esp32`. For all options see `idf.py set-target --help`
|
|
- Run `idf.py menuconfig` to open the project configuration menu. Most examples have a project-specific "Example Configuration" section here (for example, to set the WiFi SSID & password to use).
|
|
- `idf.py build` to build the example.
|
|
- Follow the printed instructions to flash, or run `idf.py -p PORT flash`.
|
|
|
|
## Running Test Python Script (ttfw)
|
|
|
|
Some of the examples have `..._test.py` scripts that are used to test that the example works as expected. These scripts run automatically in the internal test queue. They are not intended to be run by ESP-IDF users but sometimes you may want to run them locally.
|
|
|
|
Install Python dependencies and export the Python path where the IDF CI Python modules are found with the following commands:
|
|
|
|
```bash
|
|
bash install.sh --enable-ttfw
|
|
source export.sh
|
|
export PYTHONPATH=$IDF_PATH/tools/ci/python_packages:$IDF_PATH/tools:$PYTHONPATH
|
|
```
|
|
|
|
## Running Test Python Script (pytest)
|
|
|
|
Some of the examples have `pytest_....py` scripts that are using the `pytest` as the test framework. For detailed information, please refer to the "Run the Tests Locally" Section under [ESP-IDF tests in Pytest documentation](../docs/en/contribute/esp-idf-tests-with-pytest.rst)
|
|
|
|
Using `pytest` is the recommended way to write new tests. We will migrate all the example test scripts to this new framework soon.
|
|
|
|
## Copying Examples
|
|
|
|
Each example is a standalone project. The examples _do not have to be inside the esp-idf directory_. You can copy an example directory to anywhere on your computer in order to make a copy that you can modify and work with.
|
|
|
|
The `IDF_PATH` environment variable is the only thing that connects the example to the rest of ESP-IDF.
|
|
|
|
If you're looking for a more bare-bones project to start from, try [esp-idf-template](https://github.com/espressif/esp-idf-template).
|
|
|
|
## Contributing Examples
|
|
|
|
If you have a new example you think we'd like, please consider sending it to us as a Pull Request.
|
|
|
|
In the ESP-IDF documentation, you can find a ["Creating Examples" page](../docs/en/contribute/creating-examples.rst) which lays out the steps to creating a top quality example.
|