mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
4778d9b477
- Disable Kconfig option for Wifi if not supported by the SoC - Enable building mqtt examples when target is set to esp32h2
81 lines
3.1 KiB
Markdown
81 lines
3.1 KiB
Markdown
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-H2 | ESP32-S2 | ESP32-S3 |
|
|
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
|
|
|
# HTTPD Server Persistent Sockets Example
|
|
|
|
The Example consists of HTTPD server persistent sockets demo.
|
|
This sort of persistency enables the server to have independent sessions/contexts per client.
|
|
|
|
## How to use example
|
|
|
|
### Hardware Required
|
|
|
|
* A development board with ESP32/ESP32-S2/ESP32-C3 SoC (e.g., ESP32-DevKitC, ESP-WROVER-KIT, etc.)
|
|
* A USB cable for power supply and programming
|
|
|
|
### Configure the project
|
|
|
|
```
|
|
idf.py menuconfig
|
|
```
|
|
* Open the project configuration menu (`idf.py menuconfig`) to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
|
|
|
|
### Build and Flash
|
|
|
|
Build the project and flash it to the board, then run monitor tool to view serial output:
|
|
|
|
```
|
|
idf.py -p PORT flash monitor
|
|
```
|
|
|
|
(Replace PORT with the name of the serial port to use.)
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
### Test the example
|
|
|
|
In order to test the HTTPD server persistent sockets demo :
|
|
|
|
* run the test script "python scripts/adder.py \<IP\> \<port\> \<N\>"
|
|
* the provided test script sends (POST) numbers from 1 to N to the server which has a URI POST handler for adding these numbers into an accumulator that is valid throughout the lifetime of the connection socket, hence persistent
|
|
* the script does a GET before closing and displays the final value of the accumulator
|
|
|
|
See the README.md file in the upper level 'examples' directory for more information about examples.
|
|
|
|
## Example Output
|
|
|
|
```
|
|
I (9570) example_connect: - IPv4 address: 192.168.194.219
|
|
I (9580) example_connect: - IPv6 address: fe80:0000:0000:0000:266f:28ff:fe80:2c74, type: ESP_IP6_ADDR_IS_LINK_LOCAL
|
|
I (9590) example: Starting server on port: '80'
|
|
I (9600) example: Registering URI handlers
|
|
I (12860) example: /adder visitor count = 1
|
|
I (12860) example: /adder PUT handler read 0
|
|
I (12860) example: /adder PUT allocating new session
|
|
I (13070) example: /adder visitor count = 2
|
|
I (13070) example: /adder handler read 1
|
|
I (13090) example: /adder visitor count = 3
|
|
I (13090) example: /adder handler read 2
|
|
I (13110) example: /adder visitor count = 4
|
|
I (13110) example: /adder handler read 3
|
|
I (13170) example: /adder visitor count = 5
|
|
I (13170) example: /adder handler read 4
|
|
I (13190) example: /adder visitor count = 6
|
|
I (13190) example: /adder handler read 5
|
|
I (13210) example: /adder visitor count = 7
|
|
I (13210) example: /adder handler read 6
|
|
I (13270) example: /adder visitor count = 8
|
|
I (13270) example: /adder handler read 7
|
|
I (13290) example: /adder visitor count = 9
|
|
I (13290) example: /adder handler read 8
|
|
I (13300) example: /adder visitor count = 10
|
|
I (13310) example: /adder handler read 9
|
|
I (13370) example: /adder visitor count = 11
|
|
I (13370) example: /adder handler read 10
|
|
I (13390) example: /adder visitor count = 12
|
|
I (13390) example: /adder GET handler send 55
|
|
I (13420) example: /adder Free Context function called
|
|
```
|