mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
105 lines
5.4 KiB
Markdown
105 lines
5.4 KiB
Markdown
| Supported Targets | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
|
| ----------------- | -------- | -------- | -------- | -------- |
|
|
|
|
# ESP-MQTT SSL Mutual Authentication with Digital Signature
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
Espressif's ESP32-S2, ESP32-S3, ESP32-C3 and ESP32-C6 MCU have a built-in Digital Signature (DS) Peripheral, which provides hardware acceleration for RSA signature. More details can be found at [Digital Signature with ESP-TLS](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s2/api-reference/protocols/esp_tls.html#digital-signature-with-esp-tls).
|
|
|
|
This example connects to the broker test.mosquitto.org using ssl transport with client certificate(RSA) and as a demonstration subscribes/unsubscribes and sends a message on certain topic.The RSA signature operation required in the ssl connection is performed with help of the Digital Signature (DS) peripheral.
|
|
(Please note that the public broker is maintained by the community so may not be always available, for details please visit http://test.mosquitto.org)
|
|
|
|
It uses ESP-MQTT library which implements mqtt client to connect to mqtt broker.
|
|
## How to use example
|
|
|
|
### Hardware Required
|
|
|
|
This example can be executed on any ESP32-S2, ESP32-S3, ESP32-C3 or ESP32-C6 board (which has a built-in DS peripheral), the only required interface is WiFi and connection to internet.
|
|
|
|
### Configure the project
|
|
|
|
#### 1) Selecting the target
|
|
As the project is to be built for the target ESP32-S2, ESP32-S3, ESP32-C3 or ESP32-C6 it should be selected with the following command
|
|
```
|
|
idf.py set-target /* target */
|
|
```
|
|
More detials can be found at [Selecting the target](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/build-system.html#selecting-the-target).
|
|
|
|
#### 2) Generate your client key and certificate
|
|
|
|
Navigate to the main directory
|
|
|
|
```
|
|
cd main
|
|
```
|
|
|
|
Generate a client key and a CSR. When you are generating the CSR, do not use the default values. At a minimum, the CSR must include the Country, Organisation and Common Name fields.
|
|
|
|
```
|
|
openssl genrsa -out client.key
|
|
openssl req -out client.csr -key client.key -new
|
|
```
|
|
|
|
Paste the generated CSR in the [Mosquitto test certificate signer](https://test.mosquitto.org/ssl/index.php), click Submit and downloaded the `client.crt`. This `client.crt` file shall be used as the device certificate.
|
|
|
|
#### 3) Configure the DS peripheral
|
|
|
|
* i) Install the [esp_secure_cert configuration utility](https://github.com/espressif/esp_secure_cert_mgr/tree/main/tools#esp_secure_cert-configuration-tool) with following command:
|
|
```
|
|
pip install esp-secure-cert-tool
|
|
```
|
|
* ii) The DS peripheral can be configured by executing the following command:
|
|
|
|
```
|
|
configure_esp_secure_cert.py -p /* Serial port */ --device-cert /* Device cert */ --private-key /* RSA priv key */ --target_chip /* target chip */ --configure_ds --skip_flash
|
|
```
|
|
This command shall generate a partition named `esp_secure_cert.bin` in the `esp_secure_cert_data` directory. This partition would be aumatically detected by the build system and flashed at appropriate offset when `idf.py flash` command is used. For this process, the command must be executed in the current folder only.
|
|
|
|
In the command USB COM port is nothing but the serial port to which the ESP chip is connected. see
|
|
[check serial port](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/get-started/establish-serial-connection.html#check-port-on-windows) for more details.
|
|
RSA private key is nothing but the client private key ( RSA ) generated in Step 2.
|
|
|
|
> Note: More details about the `esp-secure-cert-tool` utility can be found [here](https://github.com/espressif/esp_secure_cert_mgr/tree/main/tools).
|
|
|
|
#### 4) Connection cofiguration
|
|
* Open the project configuration menu (`idf.py menuconfig`)
|
|
* Configure Wi-Fi or Ethernet under "Example Connection Configuration" menu. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
|
|
|
|
### Build and Flash
|
|
|
|
Build the project and flash it to the board, then run monitor tool to view serial output:
|
|
|
|
```
|
|
idf.py -p PORT flash monitor
|
|
```
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example Output
|
|
|
|
```
|
|
I (3714) event: sta ip: 192.168.0.139, mask: 255.255.255.0, gw: 192.168.0.2
|
|
I (3714) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
|
|
I (3964) MQTT_CLIENT: Sending MQTT CONNECT message, type: 1, id: 0000
|
|
I (4164) MQTTS_EXAMPLE: MQTT_EVENT_CONNECTED
|
|
I (4174) MQTTS_EXAMPLE: sent publish successful, msg_id=41464
|
|
I (4174) MQTTS_EXAMPLE: sent subscribe successful, msg_id=17886
|
|
I (4174) MQTTS_EXAMPLE: sent subscribe successful, msg_id=42970
|
|
I (4184) MQTTS_EXAMPLE: sent unsubscribe successful, msg_id=50241
|
|
I (4314) MQTTS_EXAMPLE: MQTT_EVENT_PUBLISHED, msg_id=41464
|
|
I (4484) MQTTS_EXAMPLE: MQTT_EVENT_SUBSCRIBED, msg_id=17886
|
|
I (4484) MQTTS_EXAMPLE: sent publish successful, msg_id=0
|
|
I (4684) MQTTS_EXAMPLE: MQTT_EVENT_SUBSCRIBED, msg_id=42970
|
|
I (4684) MQTTS_EXAMPLE: sent publish successful, msg_id=0
|
|
I (4884) MQTT_CLIENT: deliver_publish, message_length_read=19, message_length=19
|
|
I (4884) MQTTS_EXAMPLE: MQTT_EVENT_DATA
|
|
TOPIC=/topic/qos0
|
|
DATA=data
|
|
I (5194) MQTT_CLIENT: deliver_publish, message_length_read=19, message_length=19
|
|
I (5194) MQTTS_EXAMPLE: MQTT_EVENT_DATA
|
|
TOPIC=/topic/qos0
|
|
DATA=data
|
|
```
|