mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
54 lines
2.4 KiB
Markdown
54 lines
2.4 KiB
Markdown
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-P4 | ESP32-S2 | ESP32-S3 | Linux |
|
|
| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- | ----- |
|
|
|
|
# Hello World Example
|
|
|
|
Starts a FreeRTOS task to print "Hello World".
|
|
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
## How to use example
|
|
|
|
Follow detailed instructions provided specifically for this example.
|
|
|
|
Select the instructions depending on Espressif chip installed on your development board:
|
|
|
|
- [ESP32 Getting Started Guide](https://docs.espressif.com/projects/esp-idf/en/stable/get-started/index.html)
|
|
- [ESP32-S2 Getting Started Guide](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s2/get-started/index.html)
|
|
|
|
|
|
## Example folder contents
|
|
|
|
The project **hello_world** contains one source file in C language [hello_world_main.c](main/hello_world_main.c). The file is located in folder [main](main).
|
|
|
|
ESP-IDF projects are built using CMake. The project build configuration is contained in `CMakeLists.txt` files that provide set of directives and instructions describing the project's source files and targets (executable, library, or both).
|
|
|
|
Below is short explanation of remaining files in the project folder.
|
|
|
|
```
|
|
├── CMakeLists.txt
|
|
├── pytest_hello_world.py Python script used for automated testing
|
|
├── main
|
|
│ ├── CMakeLists.txt
|
|
│ └── hello_world_main.c
|
|
└── README.md This is the file you are currently reading
|
|
```
|
|
|
|
For more information on structure and contents of ESP-IDF projects, please refer to Section [Build System](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/build-system.html) of the ESP-IDF Programming Guide.
|
|
|
|
## Troubleshooting
|
|
|
|
* Program upload failure
|
|
|
|
* Hardware connection is not correct: run `idf.py -p PORT monitor`, and reboot your board to see if there are any output logs.
|
|
* The baud rate for downloading is too high: lower your baud rate in the `menuconfig` menu, and try again.
|
|
|
|
## Technical support and feedback
|
|
|
|
Please use the following feedback channels:
|
|
|
|
* For technical queries, go to the [esp32.com](https://esp32.com/) forum
|
|
* For a feature request or bug report, create a [GitHub issue](https://github.com/espressif/esp-idf/issues)
|
|
|
|
We will get back to you as soon as possible.
|