| .. |
|
adc_ll.h
|
fix(adc): fix h2 adc oneshot read zero and add delay after getting done signal
|
2023-11-13 14:48:40 +08:00 |
|
aes_ll.h
|
fix(ll): fix cpp compile error
|
2023-09-14 14:48:12 +08:00 |
|
ana_cmpr_ll.h
|
ci(adc): print adc efuse calib version in test
|
2023-10-07 19:01:04 +08:00 |
|
apm_ll.h
|
apm: updated APM HAL/LL APIs.
|
2023-10-17 18:20:36 +05:30 |
|
assist_debug_ll.h
|
feat(esp_system): implement hw stack guard for riscv chips
|
2023-07-01 16:27:40 +00:00 |
|
brownout_ll.h
|
fix(bod): Reset brownout in configuration to avoid RF cannot be enabled again
|
2023-11-24 10:17:20 +08:00 |
|
cache_ll.h
|
feat(cache): support cache driver on esp32p4
|
2023-09-22 14:19:41 +08:00 |
|
clk_gate_ll.h
|
fix(adc): fix adc continuous get less results beacuse do not reset apb clk
|
2023-11-29 14:28:33 +08:00 |
|
clk_tree_ll.h
|
support h2 eco2 fosc calibration
|
2023-04-26 15:31:18 +08:00 |
|
dedic_gpio_cpu_ll.h
|
gpio: support glitch filter on esp32h2
|
2023-02-11 23:01:01 +08:00 |
|
ds_ll.h
|
feat(ds): use RCC atomic block to enable/reset the DS peripheral
|
2023-10-11 14:59:04 +05:30 |
|
ecc_ll.h
|
feat(ecc): use RCC atomic block to enable/reset the ECC peripheral
|
2023-10-11 14:59:04 +05:30 |
|
ecdsa_ll.h
|
fix(ecdsa): remove unused k_mode from the ECDSA HAL/LL API
|
2023-11-15 09:42:26 +05:30 |
|
efuse_hal.h
|
ESP32-H2: Last MR for g0 component support, (only hal left)
|
2022-12-05 17:32:21 +08:00 |
|
efuse_ll.h
|
hal: Explicit setting of efuse time settings
|
2023-05-10 00:41:35 +08:00 |
|
etm_ll.h
|
feat(etm): add core driver support for esp32-p4
|
2023-08-23 15:11:56 +08:00 |
|
gdma_ll.h
|
feat(gdma): can read interrupt raw status
|
2023-11-20 17:25:57 +08:00 |
|
gpio_etm_ll.h
|
feat(gpio): add support for ESP32P4
|
2023-08-10 17:58:49 +08:00 |
|
gpio_glitch_filter_ll.h
|
filter: workaround a hw issue in the glitch filter
|
2023-03-29 13:28:07 +08:00 |
|
gpio_ll.h
|
refactor(gpio): make gpio driver as component, and fix astyle
|
2023-11-03 15:42:23 +08:00 |
|
gpspi_flash_ll.h
|
fix(ll): fix cpp compile error
|
2023-09-14 14:48:12 +08:00 |
|
hmac_ll.h
|
feat(hmac): use RCC atomic block to enable/reset the HMAC peripheral
|
2023-10-11 14:59:04 +05:30 |
|
i2c_ll.h
|
Merge branch 'feat/i2c_rcc_support' into 'master'
|
2023-10-28 10:01:06 +08:00 |
|
i2s_ll.h
|
refactor(apll): move the apll soc caps to clk_tree_ll
|
2023-09-28 15:03:27 +08:00 |
|
ieee802154_ll.h
|
fix(ieee802154): fix the issue of not receiving packets when RSSI is positive in esp32h2
|
2024-01-03 14:39:31 +08:00 |
|
ledc_ll.h
|
feat(ledc): support ledc on esp32p4
|
2023-10-17 16:40:04 +08:00 |
|
lp_aon_hal.h
|
feat(pm/deepsleep): Support EXT1_WAKEUP_MODE_PER_PIN
|
2023-08-09 19:46:25 +08:00 |
|
lp_aon_ll.h
|
fix(pm/ext1): fix c6 h2 lp_aon_ll_ext1_set_wakeup_pins func
|
2023-11-17 11:38:20 +08:00 |
|
lp_clkrst_ll.h
|
fix(hal): check the public header files and fix violations
|
2023-07-05 17:33:32 +08:00 |
|
lp_timer_ll.h
|
fix(hal): check the public header files and fix violations
|
2023-07-05 17:33:32 +08:00 |
|
lpwdt_ll.h
|
feat(lp_wdt): add lp wdt HAL support on C6, H2 and P4
|
2023-09-06 11:39:27 +08:00 |
|
mcpwm_ll.h
|
fix(mcpwm): enable mcpwm group clock before hal init
|
2024-01-15 18:13:56 +08:00 |
|
mmu_ll.h
|
change(soc): added SOC_ prefix to mmu defs
|
2023-09-05 15:47:26 +08:00 |
|
modem_lpcon_ll.h
|
fix(hal): check the public header files and fix violations
|
2023-07-05 17:33:32 +08:00 |
|
modem_syscon_ll.h
|
fix(hal): check the public header files and fix violations
|
2023-07-05 17:33:32 +08:00 |
|
mpi_ll.h
|
feat(mpi): use RCC atomic block to enable/reset the MPI peripheral
|
2023-10-11 14:59:03 +05:30 |
|
mpu_ll.h
|
fix(ll): fix cpp compile error
|
2023-09-14 14:48:12 +08:00 |
|
mwdt_ll.h
|
Merge branch 'bugfix/use_xtal_for_c3_wdt' into 'master'
|
2023-09-13 10:44:38 +08:00 |
|
parlio_ll.h
|
feat(parlio_rx): add parlio rx examples
|
2023-12-28 11:05:26 +08:00 |
|
pau_ll.h
|
Power Management: support PAU REGDMA feature for esp32h2
|
2023-06-26 20:58:59 +08:00 |
|
pcnt_ll.h
|
feat(pcnt): replace periph_module func with new ll func
|
2023-09-20 15:06:04 +08:00 |
|
pmu_hal.h
|
Power Management: support DFS and PMU feature for esp32h2
|
2023-06-26 20:57:55 +08:00 |
|
pmu_ll.h
|
Power Management: support DFS and PMU feature for esp32h2
|
2023-06-26 20:57:55 +08:00 |
|
regi2c_ctrl_ll.h
|
hal: Fix missing definition for "bool" type
|
2023-03-16 01:50:22 +08:00 |
|
rmt_ll.h
|
feat(rmt): support calling rmt_receive in ISR callback
|
2023-11-03 15:42:56 +08:00 |
|
rtc_io_ll.h
|
feat(lp_io): Add support for ESP32P4
|
2023-09-20 19:39:41 +08:00 |
|
rwdt_ll.h
|
wdt: refactor wdt codes to use unified type
|
2023-02-15 12:08:55 +08:00 |
|
sar_ctrl_ll.h
|
bugfix: move adc_oneshot_power_acquire/release to adc_oneshot_read
|
2023-05-18 10:29:50 +08:00 |
|
sdm_ll.h
|
sdm: support sdm on esp32h2
|
2023-01-13 16:55:51 +08:00 |
|
sha_ll.h
|
esp32h2: add support for SHA peripheral
|
2023-01-30 10:08:58 +05:30 |
|
spi_flash_encrypted_ll.h
|
fix(flash_encryption): Fix the issue that XTS_AES Plain text memory size wrong
|
2023-10-26 19:38:42 +08:00 |
|
spi_flash_ll.h
|
refactor(spi_flash): Use new spi_flash register sturct and deperecate the old one
|
2024-01-08 09:59:22 +08:00 |
|
spi_ll.h
|
refac(spi): update periph_module_xxx with rcc_automic_lock for periph bus
|
2023-10-17 11:32:23 +08:00 |
|
spimem_flash_ll.h
|
refactor(spi_flash): Use new spi_flash register sturct and deperecate the old one
|
2024-01-08 09:59:22 +08:00 |
|
systimer_ll.h
|
feat(systimer): support ETM on esp32p4
|
2023-12-07 18:46:24 +08:00 |
|
temperature_sensor_ll.h
|
feat(temperature_sensor): Add temperature sensor support on esp32p4
|
2023-12-26 16:45:20 +08:00 |
|
timer_ll.h
|
feat(gptimer): use RCC atomic block to enable/reset peripheral
|
2023-08-22 17:05:35 +08:00 |
|
twai_ll.h
|
feat(twai): support legacy twai(can) driver for esp32p4
|
2023-10-26 16:20:45 +08:00 |
|
uart_ll.h
|
fix(console): enable to select UART1 port for console output
|
2023-11-09 22:32:49 +08:00 |
|
usb_fsls_phy_ll.h
|
refactor(hal/usb): Rename usb_fsls_phy API to match header/source names
|
2023-12-28 11:48:54 +08:00 |
|
usb_serial_jtag_ll.h
|
fix(driver): Add docs and driver fix for the case where a full EP does not cause the host to pickup the data
|
2023-11-27 12:04:30 +08:00 |
