mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
b32fbb9a61
Previous the console doc is moved from api-guide to api-reference, which broken the URL as well, this commit added a redirect link to ensure the old URL can still work.
147 lines
4.8 KiB
Markdown
147 lines
4.8 KiB
Markdown
| Supported Targets | ESP32-S2 |
|
|
| ----------------- | -------- |
|
|
|
|
# USB_OTG CDC Console Example
|
|
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
This example is similar to the [advanced console example](../advanced/README.md), but instead of the UART it uses the USB CDC port provided by USB_OTG peripheral for console output.
|
|
The example uses the [Console Component](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/console.html#console) to create an interactive shell.
|
|
|
|
The interactive shell implemented in this example contains a wide variety of commands, and can act as a basis for applications that require a command-line interface (CLI).
|
|
|
|
## How to use example
|
|
|
|
### Hardware Required
|
|
|
|
This example can run on an ESP32-S2 development board, with a USB cable connected to GPIO19 and GPIO20.
|
|
|
|
### Build and Flash
|
|
|
|
Build the project, by running:
|
|
|
|
```
|
|
idf.py build
|
|
```
|
|
|
|
First time flashing can be done over USB or over UART.
|
|
|
|
#### Flashing the project for the first time using UART
|
|
|
|
This is the same procedure described in the Getting Started Guide. Flashing is done using a USB-Serial adapter included on the development board. Determine the device name of the serial port (`PORT`) and run:
|
|
|
|
```
|
|
idf.py -p PORT flash
|
|
```
|
|
|
|
#### Flashing the project for the first time using USB
|
|
|
|
We can also use the ESP32-S2 built-in USB bootloader to flash the program for the first time.
|
|
|
|
1. Connect the development board using a USB breakout cable to the computer.
|
|
2. Put the chip into bootloader (download) mode, by holding "Boot" button (connected to GPIO0) and pressing "Reset" button.
|
|
3. A USB serial port device will appear in the system:
|
|
- On Windows, it will be one of COM ports
|
|
- On Linux, it will by /dev/ttyACMn (n is some number)
|
|
- On macOS, it will be /dev/tty.usbmodemN (N is some number)
|
|
|
|
If the port doesn't appear, check that the board has entered the bootloader mode, and that the USB cable is connected correctly.
|
|
|
|
4. Flash the board:
|
|
|
|
```
|
|
idf.py -p PORT flash
|
|
```
|
|
|
|
### View the console output over USB
|
|
|
|
Once the board is flashed for the first time, a USB serial port will appear in the system.
|
|
|
|
**Note: if you have used the step above to flash the board over USB, note that the port name may change after flashing!**
|
|
|
|
To start the monitor, run:
|
|
|
|
```
|
|
idf.py -p PORT monitor
|
|
```
|
|
|
|
To exit the serial monitor, type ``Ctrl-]``.
|
|
|
|
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example Output
|
|
|
|
Enter the `help` command get a full list of all available commands. The following is a sample session of the Console Example where a variety of commands provided by the Console Example are used. Note that GPIO15 is connected to GND to remove the boot log output.
|
|
|
|
```
|
|
This is an example of ESP-IDF console component.
|
|
Type 'help' to get the list of commands.
|
|
Use UP/DOWN arrows to navigate through command history.
|
|
Press TAB when typing command name to auto-complete.
|
|
esp32s2> help
|
|
help
|
|
Print the list of registered commands
|
|
|
|
free
|
|
Get the current size of free heap memory
|
|
|
|
heap
|
|
Get minimum size of free heap memory that was available during program execution
|
|
|
|
version
|
|
Get version of chip and SDK
|
|
|
|
restart
|
|
Software reset of the chip
|
|
|
|
tasks
|
|
Get information about running tasks
|
|
|
|
(remaining output of the help command skipped here)
|
|
|
|
esp32s2> free
|
|
237824
|
|
I (39864) cmd_system: Restarting
|
|
I (185) spi_flash: detected chip: generic
|
|
I (186) spi_flash: flash io: dio
|
|
I (186) cpu_start: Starting scheduler on PRO CPU.
|
|
|
|
This is an example of ESP-IDF console component.
|
|
Type 'help' to get the list of commands.
|
|
Use UP/DOWN arrows to navigate through command history.
|
|
Press TAB when typing command name to auto-complete.
|
|
esp32s2>
|
|
```
|
|
|
|
## Troubleshooting
|
|
|
|
### Line Endings
|
|
|
|
The line endings in the Console Example are configured to match particular serial monitors. Therefore, if the following log output appears, consider using a different serial monitor (e.g. Putty for Windows).
|
|
|
|
```
|
|
This is an example of ESP-IDF console component.
|
|
Type 'help' to get the list of commands.
|
|
Use UP/DOWN arrows to navigate through command history.
|
|
Press TAB when typing command name to auto-complete.
|
|
Your terminal application does not support escape sequences.
|
|
Line editing and history features are disabled.
|
|
On Windows, try using Putty instead.
|
|
esp32s2>
|
|
```
|
|
|
|
### No USB port appears
|
|
|
|
On Windows 10, macOS, Linux, USB CDC devices do not require additional drivers to be installed.
|
|
|
|
If the USB serial port doesn't appear in the system after flashing the example, check the following:
|
|
|
|
* Check that the USB device is detected by the OS.
|
|
VID/PID pair for ESP32-S2 is 303a:0002.
|
|
|
|
- On Windows, check the Device Manager
|
|
- On macOS, check USB section in the System Information utility
|
|
- On Linux, check `lsusb` output
|
|
|
|
* If the device is not detected, check the USB cable connection (D+, D-, and ground should be connected)
|