mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
31edd48b43
* moved C++ examples to a new cxx folder in examples * added experimental C++ component * added ESPException class to the C++ experimental component * added test cases for ESPException and corresponding test macros
49 lines
2.1 KiB
Markdown
49 lines
2.1 KiB
Markdown
# C++ pthread Example
|
|
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
Support for the [C++ threads](http://www.cplusplus.com/reference/thread/thread/) in ESP-IDF is implemented on top of the [ESP-pthread](https://docs.espressif.com/projects/esp-idf/en/latest/api-reference/system/esp_pthread.html#overview) component. Thus, C++ threads created using the standard thread class constructor will automatically inherit the current ESP-pthread configuration. This example demonstrates how to leverage the thread configuration functions provided by ESP-pthread (e.g., `esp_pthread_get_default_config()` and `esp_pthread_set_cfg()`) to modify the stack sizes, priorities, names, and core affinities of the C++ threads.
|
|
|
|
**Note: Due to the use of the C++ threads, this example is written in C++ instead of C.**
|
|
|
|
## How to use example
|
|
|
|
### Hardware Required
|
|
|
|
This example should be able to run on any commonly available ESP32 development board.
|
|
|
|
### Configure the project
|
|
|
|
```
|
|
idf.py menuconfig
|
|
```
|
|
|
|
* The default ESP-pthread configuration may also be modified under `Component config > PThreads`
|
|
|
|
### Build and Flash
|
|
|
|
Build the project and flash it to the board, then run monitor tool to view serial output:
|
|
|
|
```
|
|
idf.py -p PORT flash monitor
|
|
```
|
|
|
|
(Replace PORT with the name of the serial port to use.)
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example Output
|
|
|
|
The following log output should appear when the example runs (note that the bootloader log has been omitted).
|
|
|
|
```
|
|
...
|
|
I (380) Thread 1: Core id: 0, prio: 5, minimum free stack: 2068 bytes.
|
|
I (0) pthread: This thread (with the default name) may run on any core.Core id: 1, prio: 5, minimum free stack: 2056 bytes.
|
|
I (390) Thread 1: This is the INHERITING thread with the same parameters as our parent, including name. Core id: 0, prio: 5, minimum free stack: 2092 bytes.
|
|
I (410) Thread 2: Core id: 1, prio: 5, minimum free stack: 2088 bytes.
|
|
I (410) main: core id: 0, prio: 1, minimum free stack: 2928 bytes.
|
|
```
|