| .. |
|
include/soc
|
Nimble: Update example configuration to enable ext adv feature only for BLE5.0 supported chips
|
2023-03-16 12:08:58 +05:30 |
|
ld
|
usb_host: Rename struct/ll/hal symbols to use "usb_dwc" prefix
|
2023-01-09 17:48:09 +08:00 |
|
adc_periph.c
|
adc: fix adc1 channel 8 and 9 not defined bug on s3
|
2021-12-08 18:21:28 +08:00 |
|
CMakeLists.txt
|
usb: Allow settings of all signals in usb_phy
|
2022-10-25 06:44:55 +02:00 |
|
dedic_gpio_periph.c
|
dedic_gpio: support on esp32s3
|
2021-06-30 18:10:54 +08:00 |
|
gdma_periph.c
|
gdma: support IRAM interrupt
|
2021-11-08 16:14:51 +08:00 |
|
gpio_periph.c
|
gpio: Fix ESP32S3 GPIO48 does not support hold function bug
|
2022-07-15 16:51:25 +08:00 |
|
i2c_periph.c
|
Whitespace: Automated whitespace fixes (large commit)
|
2020-11-11 07:36:35 +00:00 |
|
i2s_periph.c
|
i2s: add basic examples for STD/TDM/PDM mode
|
2022-07-21 15:52:39 +08:00 |
|
interrupts.c
|
esp32s3: fix interrupt names used by SystemView
|
2022-08-17 12:48:37 +02:00 |
|
lcd_periph.c
|
lcd: unify callback prototype
|
2021-10-02 14:23:31 +08:00 |
|
ledc_periph.c
|
Whitespace: Automated whitespace fixes (large commit)
|
2020-11-11 07:36:35 +00:00 |
|
mcpwm_periph.c
|
mcpwm: clean up hal driver and add doc
|
2022-06-02 15:01:18 +08:00 |
|
pcnt_periph.c
|
pulse_cnt: new driver for PCNT peripheral
|
2022-03-03 22:38:32 +08:00 |
|
rmt_periph.c
|
rmt: document and improve LL driver
|
2022-03-09 10:58:12 +08:00 |
|
rtc_io_periph.c
|
gpio:support gpio in/out/interrupt for esp32s3(728)
|
2021-06-28 11:44:14 +08:00 |
|
sdio_slave_periph.c
|
soc: descriptive part occupy whole component
|
2020-10-28 07:21:29 +08:00 |
|
sdm_periph.c
|
sdm: clean up soc/hal/ll code
|
2022-07-20 14:59:50 +08:00 |
|
sdmmc_periph.c
|
soc: add esp32s3 sdmmc support
|
2021-05-10 23:21:27 +02:00 |
|
spi_periph.c
|
spi_master:fix error when use spi_bus_add_device more than 3 device
|
2022-09-09 15:57:13 +08:00 |
|
temperature_sensor_periph.c
|
temperature_sensor: Add temperature sensor support for ESP32-C2
|
2022-06-23 15:36:43 +08:00 |
|
timer_periph.c
|
gptimer: clean up hal and ll for driver-ng
|
2021-10-20 18:40:08 +08:00 |
|
touch_sensor_periph.c
|
soc: added SOC_TOUCH_SENSE_SUPPORTED macro
|
2022-07-22 00:12:36 +00:00 |
|
uart_periph.c
|
uart: uart_set_pin function will now use IOMUX whenever possible
|
2021-08-04 12:48:30 +08:00 |
|
usb_otg_periph.c
|
usb: Allow settings of all signals in usb_phy
|
2022-10-25 06:44:55 +02:00 |
|
usb_periph.c
|
soc/hal: add tinyusb support esp32s3
|
2021-05-06 16:20:54 +08:00 |
