esp-idf/components/soc/esp32s3
Laukik Hase 11d5550da3
soc/esp32s3: Fix the SOC_MEM_INTERNAL_HIGH value
- As per the memory block diagram for ESP32-S3, the
  internal memory address ranges as follows:
  DRAM: 0x3FC88000 (== SOC_MEM_INTERNAL_LOW) <-> 0x3FCF0000
  IRAM: 0x40378000 <-> 0x403E0000 (== SOC_MEM_INTERNAL_HIGH)
2023-04-17 10:49:06 +05:30
..
include/soc soc/esp32s3: Fix the SOC_MEM_INTERNAL_HIGH value 2023-04-17 10:49:06 +05:30
ld usb_host: Rename struct/ll/hal symbols to use "usb_dwc" prefix 2022-09-16 16:45:26 +08:00
adc_periph.c adc: fix adc1 channel 8 and 9 not defined bug on s3 2021-12-08 18:21:28 +08:00
dedic_gpio_periph.c dedic_gpio: support on esp32s3 2021-06-30 18:10:54 +08:00
gdma_periph.c gdma: support IRAM interrupt 2021-11-08 16:14:51 +08:00
gpio_periph.c gpio: Fix ESP32S3 GPIO48 does not support hold function bug 2022-07-15 16:51:25 +08:00
i2c_periph.c Whitespace: Automated whitespace fixes (large commit) 2020-11-11 07:36:35 +00:00
i2s_periph.c i2s: support 4 line pdm rx on esp32s3 2022-11-04 15:46:34 +08:00
interrupts.c esp32s3: fix interrupt names used by SystemView 2022-08-11 11:23:03 +02:00
lcd_periph.c lcd: unify callback prototype 2021-10-02 14:23:31 +08:00
ledc_periph.c Whitespace: Automated whitespace fixes (large commit) 2020-11-11 07:36:35 +00:00
mcpwm_periph.c mcpwm: clean up hal driver and add doc 2022-06-02 15:01:18 +08:00
pcnt_periph.c pulse_cnt: new driver for PCNT peripheral 2022-03-03 22:38:32 +08:00
rmt_periph.c rmt: document and improve LL driver 2022-03-09 10:58:12 +08:00
rtc_io_periph.c esp32c6: clean up existing soc files and header file inclusion in IDF to be compatible with the new chip 2022-09-01 12:28:06 +08:00
sdm_periph.c sdm: clean up soc/hal/ll code 2022-07-20 14:59:50 +08:00
sdmmc_periph.c soc: add esp32s3 sdmmc support 2021-05-10 23:21:27 +02:00
spi_periph.c spi_master:fix error when use spi_bus_add_device more than 3 device 2022-09-05 12:10:22 +08:00
temperature_sensor_periph.c temperature_sensor: Add temperature sensor support for ESP32-C2 2022-06-23 15:36:43 +08:00
timer_periph.c gptimer: clean up hal and ll for driver-ng 2021-10-20 18:40:08 +08:00
touch_sensor_periph.c soc: added SOC_TOUCH_SENSE_SUPPORTED macro 2022-07-22 00:12:36 +00:00
twai_periph.c twai: describe peripheral info 2022-11-04 17:40:29 +08:00
uart_periph.c uart: uart_set_pin function will now use IOMUX whenever possible 2021-08-04 12:48:30 +08:00
usb_otg_periph.c usb: Allow settings of all signals in usb_phy 2022-10-18 09:18:29 +02:00
usb_periph.c soc/hal: add tinyusb support esp32s3 2021-05-06 16:20:54 +08:00