mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
104 lines
4.5 KiB
Markdown
104 lines
4.5 KiB
Markdown
| Supported Targets | ESP32-S2 | ESP32-S3 |
|
|
| ----------------- | -------- | -------- |
|
|
|
|
# TinyUSB Network Control Model Device Example
|
|
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
Network Control Model (NCM) is a sub-class of Communication Device Class (CDC) USB Device for Ethernet-over-USB applications.
|
|
|
|
In this example, we implemented the ESP development board to transmit WiFi data to the Linux or Windows host via USB, so that the host could access the Internet.
|
|
|
|
As a USB stack, a TinyUSB component is used.
|
|
|
|
## How to use example
|
|
|
|
### Hardware Required
|
|
|
|
Any ESP board that have USB-OTG supported.
|
|
|
|
#### Pin Assignment
|
|
|
|
_Note:_ In case your board doesn't have micro-USB connector connected to USB-OTG peripheral, you may have to DIY a cable and connect **D+** and **D-** to the pins listed below.
|
|
|
|
See common pin assignments for USB Device examples from [upper level](../../README.md#common-pin-assignments).
|
|
|
|
### Configure the project
|
|
|
|
Open the project configuration menu (`idf.py menuconfig`).
|
|
|
|
In the `Example Configuration` menu:
|
|
|
|
* Set the Wi-Fi configuration.
|
|
* Set `WiFi SSID`.
|
|
* Set `WiFi Password`.
|
|
|
|
### Build, Flash, and Run
|
|
|
|
Build the project and flash it to the board, then run monitor tool to view serial output:
|
|
|
|
```
|
|
idf.py -p PORT build flash monitor
|
|
```
|
|
|
|
(Replace PORT with the name of the serial port to use.)
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example Output
|
|
|
|
After the flashing you should see the output at idf monitor:
|
|
|
|
```
|
|
I (399) main_task: Calling app_main()
|
|
I (429) USB_NCM: USB NCM device initialization
|
|
W (429) TinyUSB: The device's configuration descriptor is not provided by user, using default.
|
|
W (429) TinyUSB: The device's string descriptor is not provided by user, using default.
|
|
W (439) TinyUSB: The device's device descriptor is not provided by user, using default.
|
|
I (449) tusb_desc:
|
|
┌─────────────────────────────────┐
|
|
│ USB Device Descriptor Summary │
|
|
├───────────────────┬─────────────┤
|
|
│bDeviceClass │ 239 │
|
|
├───────────────────┼─────────────┤
|
|
│bDeviceSubClass │ 2 │
|
|
├───────────────────┼─────────────┤
|
|
│bDeviceProtocol │ 1 │
|
|
├───────────────────┼─────────────┤
|
|
│bMaxPacketSize0 │ 64 │
|
|
├───────────────────┼─────────────┤
|
|
│idVendor │ 0x303a │
|
|
├───────────────────┼─────────────┤
|
|
│idProduct │ 0x4001 │
|
|
├───────────────────┼─────────────┤
|
|
│bcdDevice │ 0x100 │
|
|
├───────────────────┼─────────────┤
|
|
│iManufacturer │ 0x1 │
|
|
├───────────────────┼─────────────┤
|
|
│iProduct │ 0x2 │
|
|
├───────────────────┼─────────────┤
|
|
│iSerialNumber │ 0x3 │
|
|
├───────────────────┼─────────────┤
|
|
│bNumConfigurations │ 0x1 │
|
|
└───────────────────┴─────────────┘
|
|
I (619) TinyUSB: TinyUSB Driver installed
|
|
I (619) USB_NCM: WiFi initialization
|
|
I (619) pp: pp rom version: e7ae62f
|
|
I (629) net80211: net80211 rom version: e7ae62f
|
|
I (689) wifi_init: rx ba win: 6
|
|
I (699) wifi_init: tcpip mbox: 32
|
|
I (699) wifi_init: udp mbox: 6
|
|
I (699) wifi_init: tcp mbox: 6
|
|
I (709) wifi_init: tcp tx win: 5744
|
|
I (709) wifi_init: tcp rx win: 5744
|
|
I (719) wifi_init: tcp mss: 1440
|
|
I (719) wifi_init: WiFi IRAM OP enabled
|
|
I (719) wifi_init: WiFi RX IRAM OP enabled
|
|
I (729) phy_init: phy_version 600,8dd0147,Mar 31 2023,16:34:12
|
|
I (779) USB_NCM: USB NCM and WiFi initialized and started
|
|
I (779) main_task: Returned from app_main()
|
|
I (849) USB_NCM: WiFi STA connected
|
|
```
|