Liu Zhi Fu
0e586a4cdf
esp32: add const for some WiFi api
...
Add const if the pointer parameter is const
2017-10-13 15:10:34 +08:00
zhiweijian
520b3340f6
Component/bt: fix crash when set attr value 0
2017-10-13 15:06:08 +08:00
XiaXiaotian
5df39cd4b6
Allocate some memories in SPIRAM first.
...
Try to allocate some WiFi and LWIP memories in SPIRAM first. If
failed, try to allocate in internal RAM then.
2017-10-13 10:11:24 +08:00
Angus Gratton
0a52dbccca
Merge branch 'bugfix/spi_reset_race' into 'master'
...
periph_ctrl: Refactor to add periph_module_reset(), avoid potential race in SPI DMA workaround
See merge request !1349
2017-10-13 08:51:36 +08:00
Angus Gratton
5d8bd1aa9e
Merge branch 'bugfix/libsodium_mbedtls_sha' into 'master'
...
libsodium: Fix mbedTLS SHA256 & SHA512 implementation, make optional
See merge request !1329
2017-10-13 08:50:24 +08:00
Angus Gratton
63fdf998b8
Merge branch 'feature/windows_build_check_msys2' into 'master'
...
build system: Detect wrong Windows MSYSTEM version and warn
See merge request !1356
2017-10-13 08:50:09 +08:00
Angus Gratton
bad585b6b3
Merge branch 'bugfix/freertos_halt_on_startup' into 'master'
...
freertos: Remove "stop program on scheduler start when JTAG/OCD is detected" option
See merge request !1354
2017-10-13 08:40:39 +08:00
Ivan Grokhotkov
715d081341
freertos: fix compilation errors with portMUX debugging enabled
...
Fixes https://github.com/espressif/esp-idf/issues/1057
Ref TW15702.
2017-10-13 08:33:57 +08:00
Ivan Grokhotkov
a5f96b22d1
examples/sdmmc: enable internal pull-ups in SD mode
...
Some development boards do not have sufficient external pull-ups on
SD card pins. Most notably, if high level on GPIO13 is not registered
by the card when GO_IDLE_STATE command is received, the card will enter
SPI mode and further communication will not be possible, until power to
the card is toggled.
This change enables internal pull-ups on SD card pins in an attempt to
make this initialization process more reliable.
2017-10-13 08:21:06 +08:00
Ivan Grokhotkov
3cf23ff77d
sdmmc: allow command timeouts to be configured
...
Previously the timeout was set to the same value (1000ms) for all kinds
of commands. In some cases, such as with slow cards, write commands
failed to complete in time.
This change makes command timeouts configurable via sdmmc_host_t
structure, and also makes default timeouts different for ordinary
commands and write commands.
Closes https://github.com/espressif/esp-idf/issues/1093
Ref TW15774.
2017-10-13 08:16:07 +08:00
Angus Gratton
ca7485cc9a
freertos: Remove "stop program on scheduler start when JTAG/OCD is detected" option
...
No longer used with new dual core target & JTAG instructions.
2017-10-13 10:54:02 +11:00
Ivan Grokhotkov
ab13db0e45
nvs: fix nvs_flash_init_partition initializing default partition
...
Fixes https://github.com/espressif/esp-idf/issues/1052 .
Ref TW15698.
2017-10-13 07:19:16 +08:00
Ivan Grokhotkov
4d42b5ea24
console: handle empty input to esp_console_run correctly
...
Fixes https://github.com/espressif/esp-idf/issues/1067
Ref. TW15752
2017-10-13 07:14:53 +08:00
zhiweijian
49ad8bf6c3
Component/bt: fix register more than 3 app_id failed
2017-10-12 21:07:40 +08:00
Jiang Jiang Jian
8e47c355fa
Merge branch 'feature/i2s_apll' into 'master'
...
driver/i2s: add support apll clock
See merge request !1115
2017-10-12 19:06:50 +08:00
Jiang Jiang Jian
244e947beb
Merge branch 'bugfix/btdm_fix_add_whitelist_failed' into 'master'
...
Component/bt: fix add whitelist failed
See merge request !1326
2017-10-12 19:01:01 +08:00
Jiang Jiang Jian
dbee895741
Merge branch 'bugfix/phy_init_remove_descriptions' into 'master'
...
phy init: remove descriptions of PHY init parameters
See merge request !1363
2017-10-12 19:00:10 +08:00
Jiang Jiang Jian
f8caa403db
Merge branch 'bugfix/btdm_remove_bond_device_not_return_error' into 'master'
...
component/bt: Fixed the bug when remove the bonded device with not exist address…
See merge request !1370
2017-10-12 18:59:09 +08:00
Jiang Jiang Jian
73462c052e
Merge branch 'bugfix/btdm_fix_set_scan_params_not_work' into 'master'
...
component/bt: fix scan params not work when start scan
See merge request !1307
2017-10-12 18:57:36 +08:00
Jiang Jiang Jian
e0922c9564
Merge branch 'bugfix/i2s_set_pin_valid_gpio' into 'master'
...
change to GPIO_IS_VALID_OUTPUT_GPIO for data out pin
See merge request !764
2017-10-12 18:21:25 +08:00
Jiang Jiang Jian
da247c2cf8
Merge branch 'bugfix/ledc_duty_type_change' into 'master'
...
ledc_get_duty return type changed from int to uint32_t, target_duty changed from int to uint32_t
See merge request !752
2017-10-12 18:18:33 +08:00
Jiang Jiang Jian
b78cb018a2
Merge branch 'feature/btdm_ibeacon' into 'master'
...
component/bt: add ibeacon demo
See merge request !1028
2017-10-12 18:11:49 +08:00
Jiang Jiang Jian
276034354e
Merge branch 'feature/btdm_eddystone' into 'master'
...
component/bt: Add eddystone demo
See merge request !1076
2017-10-12 17:56:05 +08:00
Jiang Jiang Jian
52be20343b
Merge branch 'bugfix/tw15438_mem_leak_on_wifi_start_stop_loop' into 'master'
...
Release DHCP structure memory when netif is down.
See merge request !1386
2017-10-12 17:51:58 +08:00
Jiang Jiang Jian
a4e4322f6c
Merge branch 'bugfix/btdm_set_sec_properity_error' into 'master'
...
component/bt: Fix bug of set sec properity error
See merge request !1336
2017-10-12 17:45:32 +08:00
Jiang Jiang Jian
3f1198529f
Merge branch 'bugfix/fail_to_connect_in_wps' into 'master'
...
WiFi :bug fix of fail to connect in wps
See merge request !1384
2017-10-12 17:39:29 +08:00
XiaXiaotian
ad1350f0ac
Release DHCP structure memory when netif is down.
2017-10-12 17:03:44 +08:00
Angus Gratton
3a4bd7f16c
Merge branch 'bugfix/wifi_tx_buffer_doc' into 'master'
...
wifi docs: Clarify WIFI_DYNAMIC_TX_BUFFER_NUM config item limit
See merge request !1375
2017-10-12 13:20:28 +08:00
Angus Gratton
6bf280efd0
Merge branch 'feature/esp32_pico_kit_getting_started_guide' into 'master'
...
ESP32-PICO-KIT Getting Started Guide
See merge request !1348
2017-10-12 13:19:07 +08:00
Angus Gratton
f3681e22de
wifi docs: Clarify WIFI_DYNAMIC_TX_BUFFER_NUM config item limit
...
Setting WIFI_DYNAMIC_TX_BUFFER_NUM to zero is not possible.
Also edit some of the related config docs a little.
2017-10-12 15:53:53 +11:00
Deng Xin
a99c89f6af
bug fix of fail to connect in wps
2017-10-12 12:01:11 +08:00
Jiang Jiang Jian
d34c59558e
Merge branch 'bugfix/fail_to_reconnect_after_reboot' into 'master'
...
Wifi: bugfix of fail to reconnect after reboot
See merge request !1378
2017-10-11 18:44:18 +08:00
Deng Xin
a05867f673
Wifi: bugfix of fail to reconnect after reboot
...
fix the issue fail to reconnect after reboot
2017-10-11 17:58:36 +08:00
Jiang Jiang Jian
3ed90a559d
Merge branch 'bugfix/btdm_fix_multi_connection_failed' into 'master'
...
component/bt: modify some comments
See merge request !1332
2017-10-11 17:00:34 +08:00
zhiweijian
cd3d9715bb
Component/bt: fix add whitelist failed
...
- fix add whitelist failed
- add add whitelist callback func
2017-10-11 15:30:09 +08:00
krzychb
f7daaa9ebe
ESP32-PICO-KIT Getting Started Guide
2017-10-11 08:02:23 +02:00
Angus Gratton
353e81da63
freertos: Also test (& handle) the case where scheduler is disabled on other CPU...
...
ie CPU A has scheduler disabled and task blocked on Q. CPU B sends to Q (or gives mutex, etc.) Task on CPU A should be woken on scheduler resume.
2017-10-11 10:48:20 +11:00
Angus Gratton
3e62c2e052
freertos: When scheduler is disabled, tasks on other core should immediately resume
...
... if triggered by a SemaphoreGive/etc.
Previously they would resume after scheduler was resumed, on next
RTOS tick of other CPU.
2017-10-11 10:48:20 +11:00
Angus Gratton
f2f9170abc
freertos: Fix bug with xTaskResumeAll() not resuming all tasks
...
Previously if multiple tasks had been added to xPendingReadyList for the CPU, only the first one was resumed.
Includes a test case for resuming multiple (pending) tasks on xTaskResumeAll().
Document the limitation that while scheduler is suspended on one CPU, it can't wake tasks on either CPU.
2017-10-11 10:48:20 +11:00
Yulong
fc359e4491
component/bt: Change the _btc_storage_remove_ble_bonding_keys function ret default vaule from 1 to 0.
2017-10-10 04:19:11 -04:00
Yulong
25e8c09b6d
component/bt: Change the param.remove_bond_dev_cmpl.status value.
2017-10-10 04:02:05 -04:00
Tian Hao
b54ef13fae
component/bt : allow init after de-init
2017-10-10 15:35:17 +08:00
Angus Gratton
30b40a2175
Merge branch 'bugfix/ff_ioctl_types' into 'master'
...
fatfs: use correct return types in ioctl calls
See merge request !1362
2017-10-10 15:01:47 +08:00
Angus Gratton
dda136eab7
Merge branch 'bugfix/heap_debugging_cleanup' into 'master'
...
Heap debugging docs cleanup & convenience functions
See merge request !1347
2017-10-10 14:59:54 +08:00
Yulong
8e08097151
component/bt: Fixed the bug when remove the bonded device with not exist address will not return error.
2017-10-10 02:29:54 -04:00
Jeroen Domburg
a8131b14b0
Merge branch 'feature/docs_update_uart_api' into 'master'
...
Updated functional overview of UART API documentation
See merge request !1328
2017-10-10 14:06:08 +08:00
Jeroen Domburg
1835c3a213
Merge branch 'feature/docs_update_pcnt_api' into 'master'
...
Extended description of the Pulse Counter API and removed redundant comments from the example
See merge request !1312
2017-10-10 14:06:03 +08:00
Jeroen Domburg
bbbfa64a66
Merge branch 'feature/docs_update_ledc_api' into 'master'
...
Updated example and description of LED PWM Controller API
See merge request !1276
2017-10-10 14:05:57 +08:00
Jiang Jiang Jian
904d6c8f2b
Merge branch 'feature/scan_optimize' into 'master'
...
wifi: scan optimize
See merge request !1334
2017-10-10 13:39:16 +08:00
Angus Gratton
f0d7cfdafe
heap: Add new heap_caps_check_integrity_all() & heap_caps_check_integrity_addr() debugging functions
...
Easier to either check all heaps, or focus on checking a particular region.
2017-10-10 16:19:30 +11:00