Foundation transport contained TCP properties for both TCP and SSL
transport, so it was enough to set the TCP connection properties
(keepalive, interface binding) to one transport only. After merging
5778a7c7 we have separate TCP properties for these transports and need
to set the same for both.
This commit also fixes unnecessary allocation of 1 more byte for if_name
Closes https://github.com/espressif/esp-protocols/issues/322
This fix ensures that https://nvd.nist.gov/vuln/detail/CVE-2020-27209 is not
reported by the ESP-IDF SBOM tool. Please note that, this CVE was anyways not
applicable for ESP32 platform, as the bootloader (user of micro-ecc library)
do not perform signing on the device, its only verification that happens in
secure-boot-v1 case.
temperature_sensor: Fix issue that have conflict with phy / Fix phy pwdet and tsens power cannot be set twice issue (v4.4)
See merge request espressif/esp-idf!25253
For certain data lengths, the last input descriptor was not getting appended
correctly and hence the EOF flag in the DMA descriptor link list was
set at incorrect location. This was resulting in the peripheral being
stalled expecting more data and eventually the code used to timeout
waiting for the AES completion interrupt.
Required configs for this issue:
CONFIG_MBEDTLS_HARDWARE_AES
CONFIG_SOC_AES_SUPPORT_DMA
This observation is similar to the issue reported in:
https://github.com/espressif/esp-idf/issues/10647
To recreate this issue, start the AES-GCM DMA operation with data length
12280 bytes and this should stall the operation forever.
In this fix, we are tracing the entire descriptor list and then appending the
extra bytes descriptor at correct position (as the last node).
DMA operation completion must wait until the last DMA descriptor
ownership has been changed to hardware, that is hardware is completed
the write operation for entire data. Earlier for the hardware GCM case,
the first DMA descriptor was checked and it could have resulted in some
race condition for non interrupt (MBEDTLS_AES_USE_INTERRUPT disabled) case.
- Support BLE RX error packet count record
- Fixed instant setting for LLC procedures with instants
- Fixed adv random delay when adv interval is less than 20ms
- Support BLE RX error packet count record
- Fixed adv random delay when adv interval is less than 20ms
- Fixed adv random address setting when owner address type is public
1. Fix WiFi not working with Tsens on ESP32S2
2. WIFI RX multipath optimization for all chips
3. BLE TX sideband optimization for C3/S3
4. Optimize ht40 tx side band issue for esp32
