Commit Graph

37 Commits

Author SHA1 Message Date
morris
705788a13f unit_tests: replace legacy timer group with gptimer 2022-01-07 14:59:09 +08:00
Cao Sen Miao
d397464fc4 spi_flash: refactor spi_flash.h to esp_rom_spiflash.h but keep the content in spi_flash.h 2021-12-30 14:12:31 +08:00
Cao Sen Miao
3dd1cfea18 spi_flash: refactor spi_flash.h to decline duplicated code 2021-12-30 14:05:12 +08:00
Cao Sen Miao
e81841318f CI: Enable ESP8684 build stage CI on master 2021-12-13 19:18:47 +08:00
Michael (XIAO Xufeng)
dd40123129 bootloader: add xmc spi_flash startup flow to improve reliability 2021-08-12 17:22:42 +08:00
Jakob Hasse
2ac44f1e76 [spi_flash]: fixed test disabling
* MR 14212 accidentally disabled the test
  "spi_flash deadlock with high priority
  busy-waiting task"
  for all targets except S3 without legacy
  flash implementation. The test is now
  disabled for all targets, since
  the same issue appeared on other targets, too.
2021-07-05 11:25:15 +08:00
Jakob Hasse
7a0d40582e [spi_flash]: Disable deadlock test from S3 2021-07-01 15:29:47 +08:00
Marius Vikhammer
79b5dedeb1 CI: minor testcases fixes and disable some cases that cant run on S3 2021-06-15 13:39:48 +08:00
Marius Vikhammer
0a95151a75 unit_test: Refactor all performance tests that rely on cache compensated timer
There is no ccomp timer on C3, which means our performance tests will start
failing again due to variance caused by cache misses.

This MR adds TEST_PERFORMANCE_CCOMP_ macro that will only fail
performance test if CCOMP timer is supported on the target
2020-12-22 18:56:24 +11:00
Angus Gratton
d4c9a45675 spi_flash: Add ESP32-C3 support
Based on internal commit 3ef01301fff
2020-12-17 15:34:13 +11:00
Angus Gratton
66fb5a29bb Whitespace: Automated whitespace fixes (large commit)
Apply the pre-commit hook whitespace fixes to all files in the repo.

(Line endings, blank lines at end of file, trailing whitespace)
2020-11-11 07:36:35 +00:00
Michael (XIAO Xufeng)
4e287a09fe spi_flash: add unit tests for qio mode 2020-09-20 01:57:14 +08:00
Michael (XIAO Xufeng)
6434c1e2bd Merge branch 'feat/esp_flash_enable_s2_ut' into 'master'
esp_flash: fix several issues and enable unit test for ESP32-S2

Closes IDF-1409

See merge request espressif/esp-idf!8259
2020-07-28 18:15:41 +08:00
morris
2917651478 esp_rom: extract common ets apis into esp_rom_sys.h 2020-07-27 15:27:01 +08:00
Michael (XIAO Xufeng)
8165025320 spi test: replace several SPIRAM_SUPPORT with SPIRAM configs
The previous config option is renamed to ESP32_SPIRAM_SUPPORT, which
cannot cover the ESP32-S2 case.
2020-07-27 12:27:05 +08:00
Michael (XIAO Xufeng)
3f778a92da spi_flash: add unit test for read/write performance 2020-05-17 22:06:03 +08:00
morris
e30cd361a8 global: rename esp32s2beta to esp32s2 2020-01-22 12:14:38 +08:00
chenjianqiang
9f9da9ec96 feat(timer): refator timer group driver
1. add hal and low-level layer for timer group
2. add callback functions to handle interrupt
3. add timer deinit function
4. add timer spinlock take function
2019-11-21 14:14:19 +08:00
Li Shuai
d48aac96a1 util-test: Fix the conflict target of esp32_test_logo between esp32s2beta and esp32 2019-09-10 20:49:36 +08:00
Li Shuai
d5a9b1a240 util-test: The cache and spi_flash tests passed 2019-09-09 16:59:29 +08:00
Angus Gratton
6990a7cd54 Merge branch 'master' into feature/esp32s2beta_update 2019-08-19 15:03:43 +10:00
Michael (XIAO Xufeng)
264ffbeb14 timer_group: use the LL 2019-08-09 13:46:31 +08:00
Angus Gratton
24d26fccde Merge branch 'master' into feature/esp32s2beta_update 2019-08-08 13:44:24 +10:00
Michael (XIAO Xufeng)
1036a091fe spi_flash: support working on differnt buses and frequency 2019-06-18 06:32:52 +00:00
Ivan Grokhotkov
cfba50811d spi_flash: fix unit tests compilation 2019-06-13 19:34:40 +08:00
Ivan Grokhotkov
6091021e83 unity: separate common and IDF specific functionality
New unity component can be used for testing other applications.
Upstream version of Unity is included as a submodule.
Utilities specific to ESP-IDF unit tests (partitions, leak checking
setup/teardown functions, etc) are kept only in unit-test-app.
Kconfig options are added to allow disabling certain Unity features.
2018-11-19 12:36:31 +08:00
Ivan Grokhotkov
f9f2937694 spi_flash: raise priority of the task performing spi_flash operation
The fix is for the situation when cache disabling mechanism causes
a deadlock with user tasks. Situation is as follows:

1. spi_flash operation is started from low-priority task on CPU0
2. It uses IPC to wake up high-priority IPC1 task on CPU1, preventing
   all other tasks on CPU1 from running. This is needed to safely
   disable the cache.
3. While the task which started spi_flash operation is waiting for IPC1
   task to acknowledge that CPU1 is not using cache anymore, it is
   preempted by a higher priority application task ("app0").
4. Task app0 busy-waits for some operation on CPU1 to complete. But
   since application tasks are blocked out by IPC1 task, this never
   happens. Since app0 is busy-waiting, the task doing spi flash
   operation never runs.

The more or less logical soltion to the problem would be to also do
cache disabling on CPU0 and the SPI flash operation itself from IPC0
task. However IPC0 task stack would need to be increased to allow doing
SPI flash operation (and IPC1 stack as well). This would waste some
memory. An alternative approach adopted in this fix is to call FreeRTOS
functions to temporary increase the priority of SPI flash operation task
to the same level as the IPC task.

Fixes https://github.com/espressif/arduino-esp32/issues/740
Fixes https://github.com/espressif/esp-idf/issues/1157
2018-07-01 20:44:42 +08:00
Ivan Grokhotkov
cc67500d3e unit test: adapt tests to single core configuration 2017-10-19 21:35:21 +08:00
Ivan Grokhotkov
92436021ab spi_flash: fix race condition in s_flash_op_complete access
Flash operation complete flag was cleared by the core initiating flash
operation. If the other core was running an ISR, then IPC task could
be late to enter the loop to check s_flash_op_complete by the time next
flash operation started. If the flag is cleared on the CPU waiting on
this flag, then the race condition can not happen.
2017-03-28 01:34:17 +08:00
Ivan Grokhotkov
8911e666a0 Merge branch 'feature/docs_partition_ota_flash' into 'master'
Partition/SPI/OTA docs & OTA new functionality

* Update partition, SPI flash & OTA docs to reflect functionality changes
* Refactor OTA implementation to perform checks mentioned in API doc
* Add new functions to OTA API: esp_ota_get_running_partition() & esp_ota_get_next_update_partition() functions
* Add spi_flash_cache2phys() & spi_flash_phys2cache() functions to support esp_ota_get_running_partition()


See merge request !513
2017-03-03 11:27:01 +08:00
Angus Gratton
f687725e97 unit tests: Use a unit test app partition table, configure spi_flash to use data partition 2017-02-22 10:26:04 +11:00
Ivan Grokhotkov
e76c187efb spi_flash: protect esp_intr_noniram_{disable,enable} in 1-core config
MR !441 (7c155ab) has fixed issue with esp_intr_noniram_{disable,enable}
calls not being properly protected by spi_flash_op_{lock,unlock}.
Unit test was added, but the unit test environment tests only dual-core
config. Similar issue was present in the code path for the single-core
config, where esp_intr_noniram_{disable,enable} calls were unprotected.

This change fixes the protection issue and updates the unit test to
run properly in single core config as well.

The issue with running unit tests for single core config will be
addressed in a separate MR.
2017-02-21 21:57:53 +08:00
Angus Gratton
36ccdee6ec spi_flash: Flush flash cache if flash_mmap()ing a written-to page
Without this, it's possible for stale information to be read from
cache via mmap, even if the MMU table entry had been invalidated
prior to writing flash (if  the same MMU table entry was re-used after
writing flash.)
2017-01-20 19:48:46 +08:00
Ivan Grokhotkov
7c155ab647 Merge branch 'bugfix/flash_op_unpinned_task' into 'master'
fixes for issues observed when using spi_flash

This MR fixes three unrelated issues:

- Race condition in spi_flash_enable_interrupts_caches_and_other_cpu
  when operations on unpinned tasks are performed.
  The issue is reported in https://github.com/espressif/esp-idf/pull/258

- esp_intr_noniram_disable doesn’t disable interrupts when compiled in
  release mode. This issue manifested itself with an illegal instruction
  exception when task WDT ISR was called at the time when flash was
  disabled.
  Fixes https://github.com/espressif/esp-idf/issues/263.

- Tick hooks on CPU1 were not called if CPU0 scheduler was disabled for
  significant amount of time (which could happen when doing flash erase).
  The issue manifested itself as “INT WDT timeout on core 1” error.
  Fixes https://github.com/espressif/esp-idf/issues/219.

See merge request !441
2017-01-19 10:14:34 +08:00
antti
f8b5c29346 esp32: add [ignore] tag to some unit test cases for CI
Add ignore tag on unit test cases that are not supported in CI yet
2017-01-18 17:08:20 +08:00
Ivan Grokhotkov
4676d159ad spi_flash: fix race condition when doing operations in unpinned tasks
spi_flash_enable_interrupts_caches_and_other_cpu function used to enable
non-IRAM interrupts after giving up flash operation lock, which would
cause problems if another task was waiting on the lock to start a flash
operation. In fact, non-IRAM interrupts should be re-enabled before the
task scheduler is resumed. Otherwise non-pinned task can be moved to the
other CPU due to preemption, causing esp_intr_noniram_enable to be
called on the other CPU, causing an abort to be triggered.

Fixes the issue reported in
https://github.com/espressif/esp-idf/pull/258
2017-01-18 15:07:27 +08:00
antti
d390449371 add unit tests to esp-idf
rename nvs host test folder, modify .gitlab-ci.yml

remove unit-test-app build

re-format unit test files

remove extra newlines in project.mk

some refactoring for unit test part in project.mk

add build files of unit-test-app in gitignore

add README.md for unit test app

correct headings in README.md

remove files and make minor tweaks in unit test app

update .gitlab-ci.yml to use unit test app

delete unused lines in component_wrapper.mk

delete periph_i2s.h and lcd test

add text floating point in components/esp32/test/Kconfig

correct idf test build paths in .gitlab-ci.yml
2016-11-22 14:45:50 +08:00