Commit Graph

350 Commits

Author SHA1 Message Date
morris
4fc16e2374 rmt: prefix caps name with SOC_ 2020-03-25 17:14:00 +08:00
morris
c91565d538 rmt: update rmt ll APIs 2020-03-25 13:19:03 +08:00
Renz Bagaporo
3d0967a58a test: declare requirements and include dirs private 2020-03-23 10:58:50 +08:00
Marius Vikhammer
3351376a11 AES: optimize AES-GCM
HW acceleration for GCM is now enabled by default

Closes IDF-1443
2020-03-12 10:20:24 +08:00
Roland Dobai
15884eccf2 Add multi-target support for performance tests 2020-03-09 13:41:56 +01:00
Angus Gratton
7b5bca9b93 unit test app: Use the new config names for DEBUG/RELEASE configs
Also build the bootloader to the same config level as the app
2020-03-09 11:55:52 +11:00
Angus Gratton
a9854f7085 Merge branch 'feature/rmt_clock_support_ref_tick' into 'master'
rmt: support ref tick && refactor unit test && re-enable unit test on ESP32-S2

Closes IDFGH-1715

See merge request espressif/esp-idf!7614
2020-03-06 15:03:52 +08:00
morris
acd4d4a40b unit test using internal signal connection 2020-03-03 20:14:46 +08:00
morris
07088c6446 rmt: disable carrier feature by default 2020-03-03 20:14:46 +08:00
morris
3c43264f83 rmt: add RMT_CHANNELS_NUM in rmt_caps.h 2020-03-03 20:14:45 +08:00
Mahavir Jain
8ae05e6547 esp_wifi: fix occasional test failure due to memory leak indications
Ensure that newly spawned task stack (dynamic) is getting freed up before
test completion and thus preventing false memory leak indication failure.

unit-test-app: add an API test_utils_task_delete

This API ensures that dynamic memory of deleted task gets freed up
before return. This helps for preventing false memory leak detections
in test failures.
2020-03-03 11:11:23 +05:30
Angus Gratton
95f7b1985b spi_flash: Remove 16KB free internal heap limit for esp_flash_read() into PSRAM
Allocation of the temporary internal buffer will now repeat until a small enough buffer can be
allocated, and only fail if less than a 256 byte block of internal RAM is free.

Adds unit test for the same, and generic test utility for creating memory pressure.
2020-03-03 00:17:27 +00:00
Sachin Parekh
301dacfb33 Exception handlers for LoadStoreError and LoadStoreAlignmentError
Configurable option to use IRAM as byte accessible memory (in single core mode) using
load-store (non-word aligned and non-word size IRAM access specific) exception handlers.
This allows to use IRAM for use-cases where certain performance penalty
(upto 170 cpu cycles per load or store operation) is acceptable. Additional configuration
option has been provided to redirect mbedTLS specific in-out content length buffers to
IRAM (in single core mode), allows to save 20KB per TLS connection.
2020-02-26 20:21:59 +08:00
Jakob Hasse
31edd48b43 C++: Moved all C++ examples to own folder
* moved C++ examples to a new cxx folder in
  examples
* added experimental C++ component
* added ESPException class to the C++ experimental
  component
* added test cases for ESPException and
  corresponding test macros
2020-02-18 12:48:57 +08:00
michael
24b16b0b19 ci: resume esp32s2 unit tests 2020-02-15 18:28:24 +08:00
michael
98ee6f55df app_update: fix unit tests 2020-02-13 15:51:42 +08:00
Konstantin Kondrashov
daa9c30c8e rmt/esp32s2: Update RMT: reg, struct, LL and test_utils/ref_clock.c 2020-02-09 20:03:31 +08:00
Konstantin Kondrashov
739eb05bb9 esp32: add implementation of esp_timer based on TG0 LAC timer
Closes: IDF-979
2020-02-06 14:00:18 +08:00
KonstantinKondrashov
aa42177e19 app_update(s2): Enable app_update UTs
Closes: IDF-1007
2020-01-31 10:34:08 +00:00
Ivan Grokhotkov
f5d37c453a unit-test-app: make compatible with ESP32-S2 reset reasons
ESP32-S2 has slightly different names of reset reasons, printed by
the ROM. Allow using ESP32 reset reason names in test cases.
2020-01-29 19:05:33 +01:00
Felipe Neves
429712c6eb freertos: moved all xtensa specific files into a separated folder 2020-01-27 16:05:30 -03:00
morris
e30cd361a8 global: rename esp32s2beta to esp32s2 2020-01-22 12:14:38 +08:00
Michael (XIAO Xufeng)
a85b207d68 ci: temporarily disable ut for esp32s2beta 2020-01-16 17:41:31 +08:00
Ivan Grokhotkov
e9426d4ed1 Merge branch 'feature/improved_cxx_tests' into 'master'
Improved C++ tests

Closes IDF-1322

See merge request espressif/esp-idf!7283
2020-01-16 10:11:32 +08:00
Angus Gratton
6662b60bc1 test: Move freertos & mbedtls tests to psram_2 config
Before:

psram before 2490560 (2490368 is the size allowed by partition)
psram after  2413136

psram_2 before 1218464
psram_2 after  1326320
2020-01-14 12:14:43 +10:00
Jakob Hasse
c8137c5298 C++: rtti unit tests, corresponding CI config 2020-01-13 16:39:21 +08:00
michael
4220752aed ut: Move tests back from "esp32" subfolder
DISABLED_FOR_TARGETS macros are used

Partly revert "ci: disable unavailable tests for esp32s2beta"

This partly reverts commit 76a3a5fb48.

Partly revert "ci: disable UTs for esp32s2beta without runners"

This partly reverts commit eb158e9a22.

Partly revert "fix unit test and examples for s2beta"

This partly reverts commit 9baa7826be.

Partly revert "efuse: Add support for esp32s2beta"

This partly reverts commit db84ba868c.
2020-01-06 17:13:53 +08:00
Angus Gratton
cf2f732b2c Merge branch 'bugfix/heap_tests_esp32s2beta' into 'master'
bugfix/heap test failure fixing for esp32s2 beta

Closes IDF-1021

See merge request espressif/esp-idf!6659
2019-12-31 15:03:01 +08:00
He Yin Ling
269af21ce6 test: fix multiple devices cases fail on python3 2019-12-30 20:21:00 +08:00
michael
2dd12ae5f8 spi: fix speed test issues on esp32s2beta
Also support performance value for different targets.
2019-12-23 10:23:01 +08:00
Felipe Neves
cf95ea40d4 heap/test_leak: changed requested memory on leak checks to match the threshold 2019-12-20 13:35:56 -03:00
Angus Gratton
ecf85555b6 Merge branch 'bugfix/small_unit_test_fixes' into 'master'
test: Small unit test fixes

See merge request espressif/esp-idf!6981
2019-12-13 14:00:05 +08:00
Marius Vikhammer
c63684cf6c hw crypto: activated hardware acceleration for esp32s2beta
Activated AES, RSA and SHA hardware acceleration for esp32s2 and enabled related unit tests.

Updated with changes made for ESP32 from 0a04034, 961f59f and caea288.

Added performance targets for esp32s2beta

Closes IDF-757
2019-12-12 12:37:29 +08:00
Angus Gratton
ba07a7dd6c unit-test: Update README for current usage of unit-test.py
Example command lines shown here were tested and Notes added
for anything which didn't work as expected.
2019-12-12 11:05:22 +11:00
Angus Gratton
9b8fffef53 unit_test.py: Add some additional console logging for context 2019-12-12 11:05:05 +11:00
Angus Gratton
9fa87f04da unit_test.py: Allow identifying a unit test which has : in the name 2019-12-12 11:05:05 +11:00
Angus Gratton
0978fc1b84 unit_test: Log each test case to console as we run it
Include a dump of the test tags
2019-12-12 11:05:05 +11:00
Angus Gratton
d35debcd99 unit_test: Print the timeout value when an 'expect' times out 2019-12-12 11:05:04 +11:00
Angus Gratton
563227d9f8 Merge branch 'bugfix/gitlab_api_error_with_python3' into 'master'
ci: fix fetch submodule error on python3

See merge request espressif/esp-idf!6961
2019-12-11 07:23:53 +08:00
He Yin Ling
486f1a05b3 test: fix incorrect error type in xunit result 2019-12-10 13:50:32 +08:00
Jakob Hasse
78e4b0ff96 CXX: enable exceptions ESP32S2-beta
Closes IDF-1039

* Enabled test cases for -fno-exceptions to S2-beta again
* Added different reset tag for S2-beta
2019-12-10 10:23:00 +08:00
He Yin Ling
c906e2afee test: update example and unit tests with new import roles:
tiny_test_fw is a python package now. import it using normal way.
2019-12-07 10:34:54 +08:00
Renz Christian Bagaporo
e6ad330018 ble_mesh_wifi_coexist example: Disable Wi-Fi RX IRAM optimisation
Otherwise IRAM usage is too high in this example.
2019-11-28 09:20:00 +08:00
morris
c3ee156df0 ethernet: move netif glue && add ref counter
1. move netif glue into single file
2. add reference counter for Ethernet driver
2019-11-27 10:36:32 +08:00
He Yin Ling
857d10a926 unit-test-app: print config name in test script 2019-11-23 20:40:23 +08:00
He Yin Ling
9665c6ef66 unit-test-app: fix test script error when handling multiple unit test configs in one config file:
If we have multiple configs, we need to flash DUT with different binaries. But if we don't close DUT before apply new config, the old DUT will be reused, so new config name will not be applied.
2019-11-23 20:40:23 +08:00
Angus Gratton
ea29c101cd Merge branch 'bugfix/fix_iram_intr_alloc_test' into 'master'
ccomp_timer: fix broken unit test

See merge request espressif/esp-idf!6779
2019-11-22 08:41:50 +08:00
Ivan Grokhotkov
0e6e7f49be tiny-test-fw: add build config and target options 2019-11-21 15:36:06 +01:00
Renz Christian Bagaporo
6540877f23 test_utils: move ccomp timer interrupt allocation/free to init/deinit 2019-11-21 11:59:46 +08:00
Angus Gratton
bc9267aa24 Merge branch 'feature/use_cpu_time_for_tests' into 'master'
Cache compensated timer

See merge request espressif/esp-idf!6087
2019-11-20 08:33:27 +08:00
Renz Christian Bagaporo
df26ab13e2 test_utils: implement performance timer 2019-11-18 10:29:01 +08:00
Jakob Hasse
cd730b94be C++: added unit tests for builtin type exceptions 2019-11-18 08:53:50 +08:00
Jiang Jiang Jian
a9c1970c03 Merge branch 'bugfix/put_more_rx_code_to_iram' into 'master'
wifi: Put some rx code to iram

Closes WIFI-490 and WIFI-1041

See merge request espressif/esp-idf!6490
2019-11-15 10:58:22 +08:00
xiehang
5e7f43f3d1 esp_wifi: Put some rx code to iram 2019-11-13 11:44:23 +00:00
David Cermak
b834c99148 examples: modify other examples and tests to use esp_netif instead of tcpip_adapter 2019-11-13 12:36:25 +01:00
Angus Gratton
5b33d6cf94 Merge branch 'feature/mbedtls_add_faster_modexp' into 'master'
mbedtls: Add a new (X^Y) mod M implementation (HAC 14.94)

Closes IDF-965

See merge request espressif/esp-idf!6418
2019-11-06 15:51:28 +08:00
KonstantinKondrashov
5ed8388f6b mbedtls: Add Montgomery exponentiation implementation (HAC 14.94)
It gave us a better performance of RSA operations. (2~11 times)

The old modexp implementation (Z = X ^ Y mod M) loaded all the data into
the hw registers and was waiting for completion, but due to
the hardware RSA implementation, the calculations always started with 4096 bit,
which took a lot of time.
Measurement results (measurements were made for keys: 2048, 3072 and 4096 bits)
(Old) - Sliding-window exponentiation (HAC 14.85):
keysize = 2048 bits
RSA key operation (performance): public [93206 us], private [280189 us]
keysize = 3072 bits
RSA key operation (performance): public [293614 us], private [858157 us]
 keysize = 4096 bits
RSA key operation (performance): public [653192 us], private [1912126 us]

Instead (Old) - Sliding-window exponentiation (HAC 14.85) was implemented
(New) - Montgomery exponentiation (HAC 14.94) which showed
better performance on private and public keys.
keysize = 2048 bits
RSA key operation (performance): public [14504 us], private [149456 us]
keysize = 3072 bits
RSA key operation (performance): public [35073 us], private [392743 us]
keysize = 4096 bits
RSA key operation (performance): public [58650 us], private [787186 us]

For this reason, the old implementation was removed
and the MBEDTLS_HARDWARE_MPI option was turned on by default.

Why the MPI_INTERRUPT option is removed:
the old implementation used calculations on the hardware and
it took a lot of time (10ms - 500ms). And in order not to stand idle
while waiting for completion, an interrupt option was added.
This made it possible to carry out other tasks during the calculation,
and this one to block. The new method is free from such a drawback and
the maximum duration of one RSA HW operation does not exceed 70us (usually 2-70 μs).
This option is no longer needed.

Closes: IDF-965
2019-11-05 16:33:11 +08:00
Angus Gratton
ad79772e7e Merge branch 'bugfix/cmake_sdkconfig_issues' into 'master'
cmake: fix sdkconfig related issues

Closes IDF-1086

See merge request espressif/esp-idf!6436
2019-11-04 18:30:49 +08:00
Renz Christian Bagaporo
d43cc4fa4b cmake: allow multiple sdkconfig defaults to be specified 2019-11-03 16:43:58 +08:00
Michael (XIAO Xufeng)
748b79e94a ci: fix one ut issue when using Wrover-B module with newer ver of PSRAM
The workaround for PSRAM that will occupy an SPI bus is enabled only when:

1. used on 32MBit ver 0 PSRAM.
2. work at 80MHz.

The test used to only check 32MBit by the config option, but for PSRAM
on Wrover-B module seems to use a newer version of 32MBit PSRAM.  So it
expects the workaround to be enabled, but actually not.

This commit split the unit test into two parts:

1. check all SPI buses are available, for all configs except psram_hspi
and psram_vspi, run on regular runners (including Wrover and Wrover-B).
a hidden option is enabled so that the compiler knows it's not building
psram_hspi or psram_vspi.

2. check the specified bus are acquired, for config psram_hspi and
psram_vspi. This only run on special runner (legacy Wrover module).
2019-11-03 03:07:37 +00:00
Ivan Grokhotkov
a088678dd4 unit-test-app: apply sdkconfig.defaults.esp32 for Make builds 2019-10-30 10:43:38 +01:00
Ivan Grokhotkov
142e49f4cc unit-test-app: fix chip-specific sdkconfig options
DEFAULT_CPU_FREQ and ULP_COPROC_ENABLED options have chip-specific
names, and should be set in a chip-specific sdkconfig.defaults file.
This commit also changes the default CPU frequency for ESP32S2 unit
tests to 240 MHz.
2019-10-30 10:41:30 +01:00
Angus Gratton
6e1aa985e7 ci: Increase INT_WDT_TIMEOUT_MS for PSRAM configs
This shouldn't be necessary, it's a workaround for a bug
in the config system.
2019-10-28 18:58:05 +11:00
Angus Gratton
8675a818f9 Merge branch 'master' into feature/esp32s2beta_merge 2019-10-22 13:51:49 +11:00
Ajita Chavan
56f73d7720 flash_ops: fix spi_flash_read with source buffer not from internal memory and size < 16
Closes https://github.com/espressif/esp-idf/issues/4010
2019-10-19 14:56:43 +08:00
Angus Gratton
496ede9bcd Merge branch 'master' into feature/esp32s2beta_merge 2019-10-15 14:59:27 +11:00
Hu Chao Ru
fc018987eb add wifi init unit test cases 2019-10-11 13:00:57 +08:00
Ivan Grokhotkov
cf7fe34cc2 ci: fix test assignment issue, rename env tag 2019-10-03 15:00:22 +02:00
Ivan Grokhotkov
5830f529d8 Merge branch 'master' into feature/esp32s2beta_merge 2019-10-02 19:01:39 +02:00
Roland Dobai
5a916ce126 Support ELF files loadable with gdb 2019-09-24 07:19:50 +00:00
Angus Gratton
f991f812ab unit test: Fix bug in idf.py ut-apply-config- targets
Bug was this sequence:

1. old sdkconfig file has some settings (maybe target=esp32s2beta)
2. idf.py builds a new sdkconfig.defaults file with full new settings
3. new settings includes something that conflicts with the old settings (for example,
CONFIG_IDF_TARGET=esp32 and BT_ENABLE=y)
4. confgen tries to apply the new "defaults" to the existing sdkconfig, settings end up a mix of both due to the conflicts

Fix is to generate the sdkconfig file directly.
2019-09-23 06:26:49 +02:00
Angus Gratton
adfc06a530 Merge branch 'master' into feature/esp32s2beta_merge 2019-09-20 10:28:37 +10:00
Angus Gratton
438d513a95 Merge branch 'master' into feature/esp32s2beta_merge 2019-09-16 16:18:48 +10:00
Sergei Silnov
c57dfbc0b8 python: Fix yaml.load warnings
Since pyyaml 5.1 yaml.load without specifing loader is deprecated
Details: https://msg.pyyaml.org/load

To keep code compatible with older versions of pyyaml
and keep best perfomance CLoader with fallback to Loader is used.
2019-09-13 10:29:38 +00:00
Michael (XIAO Xufeng)
eac802357a ci: support build esp32s2beta UT 2019-09-04 10:53:25 +10:00
Michael (XIAO Xufeng)
3a9ae4acc6 ci: pass target from build stage to unit test 2019-09-04 10:53:25 +10:00
Ivan Grokhotkov
12c9d9a564 spi_flash: remove duplicate definition of spi_flash_unlock
The other (static) definition is in flash_ops.c, all references are
also in flash_ops.c.
2019-08-23 12:37:55 +08:00
Angus Gratton
04ae56806c Merge branch 'master' into feature/esp32s2beta_update 2019-08-08 15:26:58 +10:00
Angus Gratton
24d26fccde Merge branch 'master' into feature/esp32s2beta_update 2019-08-08 13:44:24 +10:00
Anton Maklakov
afbaf74007 tools: Mass fixing of empty prototypes (for -Wstrict-prototypes) 2019-08-01 16:28:56 +07:00
Ivan Grokhotkov
26800ed71e global: update note in the partition tables
The build system automatically determines offsets of partitions from
the partition table, so no manual changes are needed. Instead, add a
note that partition offsets may need to be updated when increasing
the bootloader size.
2019-07-27 10:28:16 +02:00
Sergei Silnov
e36a76d940 idf_ext.py: don't rerun reconfig for tests when possible 2019-07-23 16:15:33 +02:00
He Yin Ling
663ed11509 unit-test-app: use stripped config name in test case ID:
We could split cases of same config into multiple binaries as we have limited rom space. So we should regard those configs like `default` and `default_2` as the same config.
2019-07-11 10:01:05 +08:00
Ivan Grokhotkov
41b6811f45 unit-test-app: split default, release, single_core configs 2019-07-10 22:44:11 +08:00
Angus Gratton
222146845c docs: Make CMake build system default, mark GNU Make as legacy option
All `-cmake` suffixes are removed
Where a GNU Make option is renamed, the `-legacy` suffix is used
2019-07-09 14:32:26 +10:00
Angus Gratton
47bbb107a8 build system: Use CMake-based build system as default when describing commands 2019-07-08 17:31:27 +10:00
He Yin Ling
81dd9d4e27 CI: use parallel attribute in CI config file 2019-07-03 16:53:34 +08:00
Sergei Silnov
aecd0f9ae4 Add subcomand options that become global 2019-06-26 10:00:21 +02:00
Renz Christian Bagaporo
e9bc46db71 tools: use new component registration api for unit test app 2019-06-21 19:53:29 +08:00
Ivan Grokhotkov
a9157aaba9 Merge branch 'bugfix/ut_ci_test_fail_because_failed_to_reset' into 'master'
ci: fix random unit test CI failure

See merge request idf/esp-idf!5264
2019-06-20 16:08:51 +08:00
Darian Leung
037c079e9a esp32: Refactor backtrace and add esp_backtrace_print()
This commit refactors backtracing within the panic handler so that a common
function esp_backtrace_get_next_frame() is used iteratively to traverse a
callstack.

A esp_backtrace_print() function has also be added that allows the printing
of a backtrace at runtime. The esp_backtrace_print() function allows unity to
print the backtrace of failed test cases and jump back to the main test menu
without the need reset the chip. esp_backtrace_print() can also be used as a
debugging function by users.

- esp_stack_ptr_is_sane() moved to soc_memory_layout.h
- removed uncessary includes of "esp_debug_helpers.h"
2019-06-19 18:30:18 +08:00
suda-morris
3f7a571c90 fix errors when ci testing for esp32 2019-06-19 15:31:47 +08:00
Angus Gratton
484eb7cd07 Merge branch 'feature/mdns_unit_tests' into 'master'
mdns: add initial unit tests

See merge request idf/esp-idf!5088
2019-06-19 14:43:51 +08:00
He Yin Ling
304e7119ce ci: fix random unit test CI failure:
we use `-` command to check if DUT reset pass. If we input `-` command
during DUT bootup, DUT could only receive `\n` and print test cases.
Print test cases could take long time and lead to reset check timeout.
Now we will add delay after reset, and enlarge reset check timeout to
solve this problem.
2019-06-18 12:22:00 +08:00
Ivan Grokhotkov
7680f520f9 unit-test-app: disable CONFIG_MBEDTLS_HARDWARE_MPI for esp32s2beta 2019-06-13 01:43:38 +08:00
Ivan Grokhotkov
25a383c521 test_utils: update for esp32s2beta 2019-06-12 16:10:11 +08:00
David Cermak
e6801912c5 mdns: added initial suite of api unit tests 2019-06-12 08:18:25 +02:00
Roland Dobai
22d070e0af spi_flash: Rename long Kconfig options 2019-06-12 08:03:07 +02:00
Ivan Grokhotkov
4b0b2c6fda Merge branch 'feature/action_specific_flags' into 'master'
idf.py: add support for action specific options

Closes IDF-501, IDFGH-1276, and IDFGH-1275

See merge request idf/esp-idf!5029
2019-06-07 00:44:09 +08:00
Sergei Silnov
20156f9702 idf.py: Add support for action specific options
Changes argument parsing mechanism from argparse to a new one, that provides better support for extensions and options that are only applicable to specific subcommands,

Breaking changes:

1. All global options should go before subcommands, i.e. `idf.py build -C ~/some/project` will not work anymore, only `idf.py -C ~/some/project build` is acceptable
2. To provide multiple values to an option like `--define-cache-entry` it's necessary to repeat option many times, i.e. `idf.py -D entry1 entry2 entry3` will not work, right way is: `idf.py -D entry1 -D entry2 -D entry3`
At the moment there are 3 options like this:  `--define-cache-entry` in base list and `--test-components` and `--test-exclude-components` in the unit test extensions
3. Drops `defconfig` and `bootloader-clean` subcommands

Closes https://github.com/espressif/esp-idf/issues/3570
Closes https://github.com/espressif/esp-idf/issues/3571
2019-06-03 13:07:02 +02:00