1. Deinit does not return ESP_ERR_WIFI_NOT_INIT if the wifi driver is no longer initialized.
2. Fix get wrong channel value use esp_wifi_get_config.
3. Fix bug of missing unlock when wifi stop.
4. Fix annotation error of api esp_wifi_connect.
Fix dependency tree so that lwip doesn't depend on any specific network
interface component.
Network interface drivers shall depend on esp_netif.
esp_netif shall depend on lwip (but not on any specific interface
driver) -- it optionally depends on vfs and esp_eth (need ethernet
header for L2/bridge mode)
1. Fix not update phy according to country code.
2. Update regdomain max channel according to country info from nvs and or AP.
3. Change nvs default country from "CN" to "01".
4. Channel 14 is allowed only 11b mode.
5. Remove csa when switch channel from/to 14 channel.
6. Update phy mode nvs when softap channel from 14 to other.
7. Fix the bug that check whether channel parameter is valid.
Docs: change default country from "CN" to "01"
PMF capable flag in wifi_pmf_config_t is internally enabled,
for devices to be able to connect to WPA3 only AP's without
additional user configuration. But PMF may need to be disabled
for debug purposes or to avoid PMF issues on AP side. Add API
esp_wifi_disable_pmf_config to support this.
While using esp_wifi_set_config, flag pmf_capable defaults to 0.
Users may not bother to enable it, which prevents connection to a
WPA3 AP. Or the AP may reset into WPA3 mode failing the re-connection.
To ensure better security, deprecate the pmf_capable flag and set it to
true internally.
Update wifi lib with below features -
1. ASAP mode for both Initiator and Responder
2. Offchannel FTM while connected to AP (ASAP only)
3. Support up to 3 Initiators simultaneously
4. Session termination, failure support etc
5. Mem-zero AP scan buffer in get_records API
* add esp-phy-lib submodule
* move libphy.a and phy_init.c from esp_wifi to esp_phy
* move librtc.a from esp_wifi to esp_phy
* move libbtbb.a from bt to esp_phy
* corresponding updates to build system
1. Fix mesh deinit blocking issue
2. Fix root has no eb for deauth frames during the networking
3. Add esp_mesh_send_block_time to set blocking time of esp_mesh_send
components/bt: Do not use feature: timer support isr dispatch method
disable controller after wake up finished.
protect critical section of power down
choose clk in sleep
components/coex: mac bb power down in light sleep
components/coex: Macro changed
components/os: protect reserved interrupt number
update phy to phy_version 300,6e46ba7,Jan 25 2021
some bugfix
1. Support for FTM to work without any connection
1. Support for ESP32-C3 chip
3. Fix error case handling if FTM fails
4. Fix asynchronization, re-transmission related issues
Update wifi lib with below additions -
1. Add FTM frame formation, IEEE definitions, event and IOCTL.
2. Implementation of FTM bursts, Measurements and RTT calculations
3. Fix Watchdog timeout, crashes with better cleanup of timers
4. Included FTM Report raw data in FTM event
Closes https://github.com/espressif/esp-idf/issues/5059
Add FTM support for below configuration -
1. Station(connected) as Initiator with AP as responder
2. SoftAP as responder with the connected Station
Added Station example with runtime FTM configurations.
1. Add Example for DPP Enrollee
2. Use DPP Supplicant API's to setup connection
3. Add support for multiple channels in Bootstrapping
4. Add Unity testcase for testing Offchannel operations
Closes https://github.com/espressif/esp-idf/issues/5654
1. Add API's and structures for Remain-onChannel & Action Tx
2. Handling of events and callbacks for the operations
3. Update WiFi lib with related API support
This commit adds different features from 802.11k and 802.11v
specifications to make the device ready for network assisted
roaming. It also adds initial framework for device to detect
whether it needs to move to a better AP.
Followings are added as part of this.
1. Support for sending neighbor report request and provide
the report back to the APP.
2. Support for beacon measurement report.
3. Support for link measurement report.
4. Support for sending bss transition management query frame
(triggered by the APP).
5. Support for bss transition management request and move
to the candidate based on that.
6. Sending the bss transition management response.
1. Fix FIX-ROOT does not reconnect to router when disconnect reason is too many
2. Add API esp_mesh_print_scan_result
3. Modify not to reset mesh_xonseq of self and children when flush_upstream_packets
4. Fix not switch to a parent candidate which has the same layer and assoc as current parent
5. Fix not arm parent monitor when a parent candidate is cleared without sending an event to mesh layer
6. Fix the new voted root does not reconnect to router if rssi is weak
Rewrite ble dynamic prio to fix ble disconn in conn_param_update/channel_map_update
Rewrite ble dynamic prio in connection establishment
Fix ble dynamic prio with latency
Fix status bit set error when conn fail
- Simplify PHY access API
- Move coexist initializing and deinitializing out from PHY API
to Wi-Fi and Bluetooth
- Remove coexist pause and resume for they are no longer needed.
H/W decryption of Mgmt frames was disabled for PMF and done through
S/W. If ESPNOW packets go through this path, it affects backward
compatibility since method of decrypting Mgmt packets is different in H/W.
To address PMF + ESPNOW Co-existance, CCMP decryption method is modified
for ESPNOW packets so that they can be decrypted correctly. Since Tx
of ESPNOW packets can still be done in H/W alongside PMF, no change
required in encryption method in S/W.
Co-Authored-By: Nachiket Kukade <nachiket.kukade@espressif.com>
Co-Authored-By: zhangyanjiao <zhangyanjiao@espressif.com>
Co-Authored-By: kapil.gupta <kapil.gupta@espressif.com>
WPS can send multiple AP credentials, while existing implementation
will only use the first credentials which could be for the 5G band.
Fix this by passing these credentials to the App and attempting
to connect using each of those. Older Apps will remain compatible
without breaking WPS, but the issue will remain.
Added following as part of this change
1. Removed auth_changed event
2. Updated doc regarding usage of WPA/WEP secuiry modes
3. Fixed WPA2 enterprise authmode threshold.
If the root is specified (FIXED-ROOT) by set type or set parent, change ie.mesh_type to MESH_ROOT before connect to router
Release emesh_recv_toDS when the root becomes non-root
esp_mesh_set_type now supports MESH_IDLE and MESH_STA
1. fix the bug for softAP update second channel wrong
2. query country code wrong when policy change from manual to auto
3. change wifi_scan_time_t from union to struct
1. Improve WiFi throughput in some Classic BT scienarios(idle, inquire scan,
connected, sniff, a2dp pause, etc).
2. Support WiFi + Classic BT + BLE mesh coexistence scienario.
3. Improve WiFi scan and connect succeed ratio in coexistence scienario.
4. Do not support to choose software coexistence preference anymore for it is
determined according to coexistence scienario automatically.
components/lwip: increase TCP send buffer and receive window limitation when TCP window scale is enabled
components/ble_mesh: Fix some bugs about ble mesh
1. fix send acl pkt after ble have sent terminate ind modify min adv interval to 10ms.
1. fix the bug when modifying the channel info of peer node
2. fix the crash when modifying peer node between unencrypted and encrypted
3. fix the bug for fetch peer
4. modify the esp_wifi_set_channel() function
5. fix the bug that the channel parameter doesn't work when adding peer node
Closes https://github.com/espressif/esp-idf/issues/2833
Closes https://github.com/espressif/esp-idf/issues/4311
1. Fix WiFi scan leads to poor performance of Bluetooth.
2. Improve WiFi connect success ratio when coexist with Bluetooth.
3. Check if WiFi is still connected when CSA or beacon timeout happen.
4. add coex pre init
1. Add changes in 4-way handshake path to allow SAE key mgmt.
2. Support for configuring WAP3 at init time, added Kconfig option.
3. Handle and propagate error conditions properly.
4. Link changes from WiFi library.
Under WPA3-Personal, SAE authentication is used to derive PMK
which is more secure and immune to offline dictionary attacks.
1. Add modules to generate SAE commit/confirm for the handshake
2. Add modules that build and parse SAE data in Auth frames
3. Add WPA3 association and key mgmt definitions
4. Invert y-bit while solving for ECC co-ordinate -
Once an X co-ordinate is obtained, solving for Y co-ordinate
using an elliptical curve equation results in 2 possible values,
Y and (P - Y), where p is the prime number. The co-ordinates are
used for deriving keys in SAE handshake. As par the 802.11 spec
if LSB of X is same as LSB of Y then Y is chosen, (P - Y) otherwise.
This is not what is implemented, so fix this behavior to obtain the
correct Y co-ordinate.
This change ports SAE(Simultaneous Authentication of Equals)
feature from wpa_supplicant and makes it work with mbedtls
crypto APIs. Currently only group 19 is supported. A sample
SAE handshake is included in the testcase. Other minor
changes for DH groups are also included.
1. Add CCMP, AES crypto modules for unicast protected Mgmt frames
2. Add support for computing SHA256 MIC on Bcast Mgmt frames
3. Add support for storing iGTK during 4-way handshake.
4. Provide APIs to MLME for utilizing the SW crypto modules
5. Link PMF changes from WiFi library submodule
1. Add APIs for configuring PMF through set config.
2. Map Supplicant and Wifi Cipher types.
3. Add support for PMF negotiation while generating RSN IE.
