1. Update documentation for WPA3 Enterprise and WPA3 Enterprise 192-bit
mode
2. Update documentation for WPA3 OWE and OWE transition mode
3. Update documentation related to SAE PK, SAE PWE and Transition Disable
4. Update documnetation for wifi connect API
5. Fix config paramter information for wifi scan start
6. Fix documentation related to scan threshold config setting
7. Replace ESP_ERR_WIFI_ARG error code as ESP_ERR_INVALID_ARG
8. Update documentation for 802.11R Fast transition
1. Increase timeout value for NDP Accepted/Rejected events.
2. Update publisher ID incase publisher restarts(service).
3. Ignore service discovery frames with invalid/inactive service ID.
4. Update NAN documentation
1) Fix issue during split scan to allow for data tx.
2) Fix issue when parsing wpa_ie to set correct authmode when AP
supports both WPA_EAP and WPA_EAP_SHA256 authmode.
Closes https://github.com/espressif/esp-idf/issues/11202
3) Fix an occasional crash during sta roam.
4) Add home_channel_dwell_time to wifi_scan_config_t. This allows
configuration of the time spent between scanning consecutive
channels for tx.
2. Remove user configurable flag fsd_reqd from NAN publish config
3. Fix issue wherein NDL of previously cancelled service is obtained in peer record of new service with no NDL
Update wifi lib with below -
1. Create NAN Discovery SM for beaconing & cluster formation
2. Create NAN interface for Tx/Rx of beacons & action frames
3. Add commands & events for NAN Services Publish/Subscribe/Followup
4. Add NAN Datapath definitions, Events, Peer structures
5. Support for forming and parsing of Datapath related attributes
6. Modules for NDP Req, Resp, Confirm, Term, Peer management
7. NAN Interface related additions in Datapath, Data Tx Q's
In addition include below changes -
1. Add netif and driver support for NAN Interface
2. Add simple examples for Publisher-Subscriber usecases
3. Add an advanced console example that supports commands
for NAN Discovery, Services & Datapath
4. Add wifi_apps for providing better NAN API's and Peer management
Co-authored-by: Shyamal Khachane <shyamal.khachane@espressif.com>
modem retention: Support esp32c6 wifi MAC and baseband sleep retention
sleep_modem: wifi MAC modem wakeup protect in modem state before PMU trigger sleep enable request
sleep modem: provide a interface to get whether the Modem power domain is allowed to power off during sleep
add i2c_ana master header file to project
auto beacon: release PMU's lock on root clock source (it is locked in the PLL)
wifi receiving beacon frame in PMU modem state strongly depends on the BBPLL
clock, PMU will forcibly lock the root clock source as PLL, when the root
clock source of the software system is selected as PLL, we need to release
the root clock source locking.
When it is judged that the PLL is locked by PMU after wakeing up from the PMU
modem state, switch the root clock source to the PLL in the sleep process (a
critical section).
auto beacon: fix the failure to receive broadcast/multicast frames in modem state
When the multicast field in the beacon frame received in the PMU modem state is
True, the PMU switches to the PMU active state (the PMU waits for the HP LDO to
stabilize and then restores the MAC context) and starts to receive
broadcast/multicast frames (Broadcast/Multicast frames will be sent after a
minimum delay of 48 us after the beacon frame), because the PMU waits for the HP
LDO to stabilize too long (~154 us), which will cause broadcast/multicast frame
reception to be missed.
auto beacon: select the PLL clock source as the REGDMA backup clock source when the PMU switches to ACTIVE from MODEM state
update Digital Peripheral (M2A switch) REGDMA restore time parameter
auto beacon: fix the issue that only channel 1 can connect to AP in modem state
Update wifi libs with below changes -
1. reject AP when assoc comeback time given is greater than 5 seconds
2. handle when assoc req is received before SA query procedure is finished
Closes https://github.com/espressif/esp-idf/issues/9428
1. Deinit does not return ESP_ERR_WIFI_NOT_INIT if the wifi driver is no longer initialized.
2. Fix get wrong channel value use esp_wifi_get_config.
3. Fix bug of missing unlock when wifi stop.
4. Fix annotation error of api esp_wifi_connect.
Fix dependency tree so that lwip doesn't depend on any specific network
interface component.
Network interface drivers shall depend on esp_netif.
esp_netif shall depend on lwip (but not on any specific interface
driver) -- it optionally depends on vfs and esp_eth (need ethernet
header for L2/bridge mode)
1. Fix not update phy according to country code.
2. Update regdomain max channel according to country info from nvs and or AP.
3. Change nvs default country from "CN" to "01".
4. Channel 14 is allowed only 11b mode.
5. Remove csa when switch channel from/to 14 channel.
6. Update phy mode nvs when softap channel from 14 to other.
7. Fix the bug that check whether channel parameter is valid.
Docs: change default country from "CN" to "01"
PMF capable flag in wifi_pmf_config_t is internally enabled,
for devices to be able to connect to WPA3 only AP's without
additional user configuration. But PMF may need to be disabled
for debug purposes or to avoid PMF issues on AP side. Add API
esp_wifi_disable_pmf_config to support this.
While using esp_wifi_set_config, flag pmf_capable defaults to 0.
Users may not bother to enable it, which prevents connection to a
WPA3 AP. Or the AP may reset into WPA3 mode failing the re-connection.
To ensure better security, deprecate the pmf_capable flag and set it to
true internally.
