Yulong
abf87b000d
component/bt:fixed the write ccc crash bug error
2017-02-20 08:50:02 -05:00
Tian Hao
4bd5b0c91a
component/bt : add bt enable/disable for power save
...
1. add new APIs bt controller enable/disab/deinit
2. make bt controller work need to call two APIs of esp_bt_controller_init and enable
3. modify phy init to make mac reset once
2017-02-17 19:24:58 +08:00
XiaXiaotian
cd13c9e95d
disable phy and rf
...
1. add a macro in menuconfig for users to choose whether store phy calibration data into NVS or not.
2. rename some disable phy and rf APIs so that existing code which calls old APIS will fail to compile.
2017-02-17 10:24:55 +08:00
XiaXiaotian
eb14284c92
disable PHY and RF when stop WiFi and disable BT
...
1. Add disable PHY and RF when WiFi and BT are both disabled(including call sniffer disable API).
2. Do not init PHY and RF when cpu start. Init PHY and RF when call Wifi or BT start APIs(including sniffer enable API).
3. Add a temporary lib: librtc_clk.a and will delete it when CPU frequency switching function is done.
4. Add an function to get OS tick rate.
5. Do not put the whole pp.a in iram0, only put lmac.o, ieee80211_misc.o, ets_time.o and wdev.o in iram0.
2017-02-17 10:24:54 +08:00
Jiang Jiang Jian
61c7bd3c3a
Merge branch 'bugfix/btdm_gatt' into 'master'
...
component/bt : fix gatt write memory leak
fix bug of GATT write cause memory leak
See merge request !506
2017-02-16 15:13:05 +08:00
Tian Hao
6648ff427c
component/bt : fix connection bug of Iphone7 10.0.2
...
This connection error caused by iPhone, it think that TX data length must large than 27 when slave support EXTEND_DATA_LENGTH. But this should be allow. Besides, the problem cannot be found on higher version of Iphone7, apple seemed to have fixed it.
Actually maybe other BLE device have the same problem.
2017-02-16 14:15:46 +08:00
Tian Hao
5023e30a33
component/bt : fix gatt write memory leak
2017-02-15 20:08:39 +08:00
Jiang Jiang Jian
2664291ba5
Merge branch 'bugfix/btdm_blufi' into 'master'
...
fix BLUFI bug
fix BLUFI bug with small MTU size
See merge request !493
2017-02-13 14:52:46 +08:00
Tian Hao
5fd7bd14db
component/bt : fix GATT disconnect memory leak bug
2017-02-13 14:00:26 +08:00
Tian Hao
2c334b46e0
component/bt : fix BLUFI bug with small MTU size
2017-02-10 11:20:34 +08:00
Ivan Grokhotkov
8e467801bc
Merge branch 'bugfix/btdm_debug_gatt_attr_table' into 'master'
...
component/bt: Fix Gatt table read_req bug and advertising channel 39 not available bug
1. Fix Gatt table read request bug
2. Fix advertising channel 39 not available bug
See merge request !463
2017-01-25 11:48:09 +08:00
Island
c6bb239f0c
component/bt: Fix Gatt table read_req bug and advertising channel 39 not available bug
2017-01-25 11:18:26 +08:00
wangmengyang
2c87e84b0a
component/bt: bluetooth storage module clean up and bug fix.
...
1. clean up bluetooth storage log prints;
2. reduce maximum link key storage size
3. modify so that the link key information of the latest connected device is stored at first
2017-01-20 16:46:10 +08:00
Angus Gratton
0b257cfcef
bt: esp_ble_gatts_send_indicate: Fix description
2017-01-20 14:56:54 +11:00
Tian Hao
0073ff3acd
component/bt : add api to set raw adv_data/scan_rsp_data
...
1. add api to set raw scan response data
2. add api to set raw scan response data
3. update doxygen
4. add menuconfig to config gatt server demo
2017-01-19 17:36:40 +08:00
wangmengyang
0f711963d7
component/bt: implement non-volatile memory access module for link key storage
...
1. btif_storage module is ported
2. update controller library that moves functions called in ISRs to IRAM
2017-01-19 17:11:01 +08:00
wangmengyang
36a74daa0a
component/bt: clean up AVRCP API and example code
2017-01-19 15:23:46 +08:00
Tian Hao
5508826509
component/bt : fix gatts demo mistakes & unpeg notify bug
2017-01-17 20:13:25 +08:00
Tian Hao
799be9fa3a
component/bt : fix gatt server table bugs
...
1. fix gatt server table bugs
2. fix blufi a minor bug
2017-01-17 18:42:11 +08:00
wangmengyang
49b68c38fa
Merge branch 'master' into feature/btdm_avrc
...
# Conflicts:
# components/bt/bluedroid/hci/packet_fragmenter.c
# components/bt/bluedroid/stack/include/gatt_api.h
2017-01-17 10:36:26 +08:00
Wu Jian Gang
9052c6e9ee
Merge branch 'bugfix/btdm_adv_stop' into 'master'
...
component/bt : fix adv stop bug
fix advertising cannot stop bug.
See merge request !412
2017-01-12 17:32:09 +08:00
Wu Jian Gang
ad1790fe3e
Merge branch 'feature/btdm_attr_table' into 'master'
...
component bt:Added the create attribute table method to the new API
GATT Server service table APIs.
Have already modify the style and other things as @jeroen suggestion in other MR(the MR have been closed)
See merge request !399
2017-01-12 17:31:39 +08:00
Tian Hao
1895460406
component/bt : fix adv stop bug
2017-01-12 16:29:07 +08:00
Tian Hao
fec2f534d5
component/bt : gatt server table fix uuid discovery bug
2017-01-12 16:25:09 +08:00
Tian Hao
142756615b
component/bt : mv demo name
...
1. mv demo name
2. fix a docs
2017-01-12 14:44:26 +08:00
Island
9f151d745e
component/bt : Optimize Gatt attr table and fix some bugs
...
1. Optimize GATT attribute table structure
2. fix read/write bugs
3. add docs
2017-01-12 11:49:15 +08:00
Tian Hao
1eed54c7cd
component/bt : modify bluedroid task to core0
2017-01-11 17:19:25 +08:00
Yulong
d512d6100c
component bt:Added the create attribute table method to the new API
2017-01-11 16:57:19 +08:00
Jiang Jiang Jian
0c01ef68f1
Merge branch 'bugfix/id9562_unregistered_callback' into 'master'
...
component/bt: check for registration status of callback function before using it
Add checking of NULL function pointers when calling bluetooth callbacks, especially before the callback functions are registered
See merge request !406
2017-01-11 15:57:03 +08:00
wangmengyang
babeed4170
component/bt: change MACRO to inline function when invoking callbacks
2017-01-11 14:08:16 +08:00
wangmengyang
c592714679
component/bt: fix typos in "if" condition espressions
2017-01-11 13:36:48 +08:00
wangmengyang
0c31bdf643
component/bt: check for registration status of callback function before using it
2017-01-11 11:31:35 +08:00
wangmengyang
59540eeae1
component/bt: bug fix of lack of checking bluetooth stack status inside API functions
2017-01-11 11:04:41 +08:00
Tian Hao
9c630b759f
component/bt : add bt device api
...
1. add get bd_addr function
2017-01-06 21:19:58 +08:00
Tian Hao
e4b9563dac
component/bt : blufi add version
2017-01-06 17:40:46 +08:00
Tian Hao
24af07fd13
component/bt : new blufi
...
1. new blufi protocol
2. new blufi demo
3. support security
4. support sta/ap/sta_ap
5. support wpa-enterprise
2017-01-05 20:22:35 +08:00
wangmengyang
2e7748d625
component/bt: modify bluetooth API
...
1. VHCI api and doxygen
2. Controller api and doxygen
3. bluedroid init/enable api and doxygen
4. cleanup demo codes
2017-01-05 20:02:06 +08:00
Tian Hao
d6fcec73b2
component/bt : add macro for adv_data_flag
...
1. add macro for adv data flag
2. add docs for doxygen
2017-01-05 17:53:33 +08:00
Tian Hao
daf58e3852
component/bt : fix advertising bug
...
1. adv data flag
2. default adv data not BR/EDR in demo
2017-01-05 17:53:33 +08:00
wangmengyang
44914c17bc
component/bt: add AVRC controller example with simple PASSTHROUGH cmd
2017-01-05 15:43:44 +08:00
Tian Hao
ee318d42ae
Merge branch 'master' into feature/btdm_gatt_api
2017-01-05 15:25:03 +08:00
Angus Gratton
06e03ff52e
Replace backwards-compatible portTICK_RATE_MS with FreeRTOS v8+ portTICK_PERIOD_MS
...
Closes github #51 https://github.com/espressif/esp-idf/issues/51
2016-12-28 10:23:13 +11:00
wangmengyang
d7c1c0b1f6
component/bt: fix API typos, add license headers and fix some log messages
2016-12-27 13:48:07 +08:00
wangmengyang
9b6247a507
component/bt: modify comment formats for API headers
2016-12-26 22:02:40 +08:00
wangmengyang
c94e0177c2
component/bt: Merge branch 'master' into feature/btdm_a2dp
2016-12-26 20:35:28 +08:00
wangmengyang
0ad3017df7
component/bt: A2DP code original in example project moved to component/bt directory;
...
1. move btif and A2DP source code from project directory to bluetooth directory;
2. some updates of audio source code;
2016-12-26 17:40:28 +08:00
wangmengyang
6163d214b3
component/bt: API clean up for the A2DP example
2016-12-26 17:26:54 +08:00
Tian Hao
65fe6ab320
component/bt : modify demo for new api
...
1. modify GATT Client demo
2. modify GATT Server demo
3. fix a register notify bug
2016-12-19 17:15:41 +08:00
Tian Hao
c01dedcb06
component/bt : change api for V2.0
...
1. change all gatt cb function to 3 args and function type. add gattc_if/gatts_if as second argument
2. delete gatt_if of "gatt cb param"
3. separate conn_id and gatt_if from conn_id
4. change the demo code as the gatt changed
2016-12-19 17:15:41 +08:00
Tian Hao
d242251295
component/bt : fix advertising bug
...
1. low duty can not be set bug
2. adv type can not be effective bug
2016-12-15 14:33:09 +08:00
Tian Hao
f3450abf3d
component/bt : add some macro , so redo the doxygen
2016-12-15 14:02:48 +08:00
Tian Hao
d045187c0f
component/bt : change the resolving list cleanup position
...
1. enable will malloc, but disable don't free resolving list, so fix it
2. In disable procedure, it will alloc alarm to hash_map, and all the alarm hash_map will be free in deinit. So this need not be fixed currently.
2016-12-15 13:35:30 +08:00
Tian Hao
aba262b18b
component/bt : fix bluetooth disable memory leak
2016-12-15 01:36:27 +08:00
Tian Hao
69ee1de9fa
component/bt : fix enable bug
...
1. enable will cause exception with list->head memory modify
2. gatt complete, timeout with HCI cmd timeout will cause exception
2016-12-14 22:10:21 +08:00
Tian Hao
5e87cdec7e
component/bt : increase the task stack size
...
1. increase HCI task stack size
2. increase BTC task stack size for default
2016-12-14 22:10:21 +08:00
Tian Hao
fd11beebcd
component/bt : fix the init/deinit memory leak
...
1. modify the memory debug
2. fix init/deinit memory leak
2016-12-14 22:10:21 +08:00
Tian Hao
7ae7a56457
component/bt : fix the bug of deinit/disable
...
1. fix the exception of deinit/disable
2. debug mem leak of deinit, fix some memleak, but still something wrong.
3. debug men leak of disable.
4. add bluedroid memory debug
2016-12-14 22:10:21 +08:00
Tian Hao
1be09039e3
component/bt : cleanup the un-necessary include in api.h
...
1. cleanup the un-necessary include in api.h for "extern c"
2. add UUID define
2016-12-09 14:38:21 +08:00
Tian Hao
4c6ccf1c23
component/bt : add cpp extern c
...
1. add cpp extern c
2. retab tab to 4 space
2016-12-09 14:38:21 +08:00
Tian Hao
e0e6966be0
component/bt : fix the authentication req type
2016-12-09 14:38:21 +08:00
Tian Hao
8185b0f806
component/bt : fix bug of bdaddr point to resolve gattc recv notify
2016-12-09 14:38:21 +08:00
Tian Hao
5933ebc6b6
component/bt : cleanup all the "-W-no-xx" and all the warnings
...
1. cleanup the warnings.
2. fix the some function called in gap
3. fix some code in btc_main
2016-12-07 13:49:53 -08:00
wangmengyang
11ddfbba4e
Merge branch 'feature/btdm_bluedroid' into feature/btdm_a2dp
...
# Conflicts:
# examples/13_bt_sdp/components/bluedroid_demos/btif/btif_core.c
# examples/13_bt_sdp/components/bluedroid_demos/include/btif_util.h
2016-12-02 22:33:09 +08:00
Tian Hao
d925b96daf
component/bt : cleanup the function warning in doxygen
2016-12-01 20:55:08 +08:00
Tian Hao
954ffa102f
component/bt : add ble event type
2016-12-01 20:16:09 +08:00
Tian Hao
bdf4006da7
component/bt : cleanup the return style
2016-12-01 19:58:52 +08:00
Tian Hao
c6ec70b67b
component/bt : cleanup the function comment as doxygen type
2016-12-01 18:58:54 +08:00
Tian Hao
281a9c2761
component/bt : fix a code bug
2016-12-01 12:14:57 +08:00
Tian Hao
758a9e5f06
component/bt : fix compile error
2016-11-29 19:45:10 +08:00
Tian Hao
5a14e8addf
component/bt : use ESP_LOGx instead of printf
2016-11-29 17:42:04 +08:00
Tian Hao
9f33d8f5c0
component/bt : add write type
2016-11-29 17:27:12 +08:00
Tian Hao
3a3d4276f8
component/bt : cleanup the comment and pass all doxygen check
2016-11-29 15:32:29 +08:00
Tian Hao
06e2a1d4e1
component/bt : cleanup a macro
2016-11-29 14:38:58 +08:00
Tian Hao
f6de7ea764
component/bt : cleanup status and spell check
2016-11-28 22:40:30 +08:00
Tian Hao
9d9e758756
component/bt : add comment for doxygen
...
1. use doxygen check api comment
2016-11-28 21:59:04 +08:00
wangmengyang
50227f12fd
Merge branch 'feature/btdm_bluedroid' into feature/btdm_a2dp
...
# Conflicts:
# components/bt/bluedroid/bta/include/bta_api.h
# components/bt/bluedroid/bta/include/bta_gattc_int.h
# components/bt/bluedroid/hci/hci_hal_h4.c
# components/bt/bluedroid/hci/hci_layer.c
# components/bt/bluedroid/include/bt_target.h
# components/bt/bluedroid/stack/btu/btu_init.c
2016-11-28 18:06:24 +08:00
Tian Hao
fd0d28afc3
component/bt : cleanup some missing code
2016-11-28 16:39:53 +08:00
Tian Hao
ff8ce12787
component/bt : cleanup the spell && redundant
2016-11-28 14:58:30 +08:00
wangmengyang
2c577b1360
component/bt: reduce bt tasks' stack size
2016-11-26 16:46:52 +08:00
wangmengyang
2e8af3a8b7
component/bt: fix typos and complier errors of the merged code
...
1. format the source code of A2DP sample
2. fix some compiler errors and warnings
2016-11-26 13:09:55 +08:00
Tian Hao
1173106a20
component/bt : change task to decease dram(heap)
...
1. decrease the task size(HCI cannot < 1024, btu cannot < 4096)
2. btc task can config by menuconfig(default 2048)
2016-11-25 23:37:46 +08:00
Tian Hao
c9a0b9a45c
component/bt : decrese dram
...
1. decrease some resource
2016-11-25 21:24:16 +08:00
wangmengyang
73f00732cf
Merge branch 'feature/btdm_bluedroid' into feature/btdm_a2dp
...
# Conflicts:
# components/bt/bluedroid/bta/sys/bta_sys_main.c
# components/bt/bluedroid/btc/profile/std/avrc/avrc_api.c
# components/bt/bluedroid/btc/profile/std/avrc/avrc_bld_ct.c
# components/bt/bluedroid/btc/profile/std/avrc/avrc_bld_tg.c
# components/bt/bluedroid/btc/profile/std/avrc/avrc_opt.c
# components/bt/bluedroid/btc/profile/std/avrc/avrc_pars_ct.c
# components/bt/bluedroid/btc/profile/std/avrc/avrc_pars_tg.c
# components/bt/bluedroid/btc/profile/std/avrc/avrc_sdp.c
# components/bt/bluedroid/btc/profile/std/avrc/avrc_utils.c
# components/bt/bluedroid/btc/profile/std/avrc/include/avrc_int.h
# components/bt/bluedroid/btc/profile/std/include/avct_api.h
# components/bt/bluedroid/btc/profile/std/include/avdt_api.h
# components/bt/bluedroid/btc/profile/std/include/avdt_defs.h
# components/bt/bluedroid/btc/profile/std/include/avdtc_api.h
# components/bt/bluedroid/btc/profile/std/include/avrc_api.h
# components/bt/bluedroid/btc/profile/std/include/avrc_defs.h
# components/bt/bluedroid/gki/gki_buffer.c
# components/bt/bluedroid/hci/hci_hal_h4.c
# components/bt/bluedroid/hci/hci_layer.c
# components/bt/bluedroid/hci/packet_fragmenter.c
# components/bt/bluedroid/include/bt_trace.h
# components/bt/bluedroid/osi/alarm.c
# components/bt/bluedroid/profiles/std/avrc/avrc_api.c
# components/bt/bluedroid/profiles/std/avrc/avrc_bld_ct.c
# components/bt/bluedroid/profiles/std/avrc/avrc_bld_tg.c
# components/bt/bluedroid/profiles/std/avrc/avrc_opt.c
# components/bt/bluedroid/profiles/std/avrc/avrc_pars_ct.c
# components/bt/bluedroid/profiles/std/avrc/avrc_pars_tg.c
# components/bt/bluedroid/profiles/std/avrc/avrc_sdp.c
# components/bt/bluedroid/profiles/std/avrc/avrc_utils.c
# components/bt/bluedroid/profiles/std/avrc/include/avrc_int.h
# components/bt/bluedroid/profiles/std/include/avct_api.h
# components/bt/bluedroid/profiles/std/include/avdt_api.h
# components/bt/bluedroid/profiles/std/include/avdt_defs.h
# components/bt/bluedroid/profiles/std/include/avdtc_api.h
# components/bt/bluedroid/profiles/std/include/avrc_api.h
# components/bt/bluedroid/profiles/std/include/avrc_defs.h
# components/bt/bluedroid/stack/avdt/include/avdt_defs.h
# components/bt/bluedroid/stack/avrc/avrc_api.c
# components/bt/bluedroid/stack/avrc/avrc_bld_ct.c
# components/bt/bluedroid/stack/avrc/avrc_bld_tg.c
# components/bt/bluedroid/stack/avrc/avrc_opt.c
# components/bt/bluedroid/stack/avrc/avrc_pars_ct.c
# components/bt/bluedroid/stack/avrc/avrc_pars_tg.c
# components/bt/bluedroid/stack/avrc/avrc_sdp.c
# components/bt/bluedroid/stack/avrc/avrc_utils.c
# components/bt/bluedroid/stack/avrc/include/avrc_int.h
# components/bt/bluedroid/stack/btu/btu_task.c
# components/bt/bluedroid/stack/include/avct_api.h
# components/bt/bluedroid/stack/include/avdt_api.h
# components/bt/bluedroid/stack/include/avdtc_api.h
# components/bt/bluedroid/stack/include/avrc_api.h
# components/bt/bluedroid/stack/include/avrc_defs.h
# components/bt/bluedroid/stack/include/gatt_api.h
# components/bt/bluedroid/stack/l2cap/l2c_main.c
# components/bt/component.mk
# examples/06_bluedroid_demos/components/bluedroid_demos/app_core/bt_app_core.c
2016-11-25 19:45:29 +08:00
Tian Hao
ac87ddfb05
component/bt : close sdp to free dram
...
1. free 15K
2016-11-25 15:54:18 +08:00
wangmengyang
8e77c39deb
component/bt: reduce the task stack size
...
1. some tasks's stack size is reduced and the previous severe audio distortion issue is eliminated
2016-11-25 11:21:29 +08:00
Tian Hao
19273c7b2d
component/bt : run astyle handle the code files
2016-11-25 02:10:15 +08:00
Tian Hao
d7eb709a9c
component/bt : add license header
2016-11-25 01:58:26 +08:00
wangmengyang
dae40afffb
component/bt: add protection in GKI_getbuf to protect against memory allocation failure;
2016-11-25 00:05:39 +08:00
Tian Hao
e5ceddabac
component/bt : change gatt client callback param
...
1. change the array to point to decrease the memory occupy
2. change the sendindconfirm position
3. fix union lost
2016-11-24 15:17:49 +08:00
wangmengyang
d50792dec9
component/bt: enlarge GATT related data size to remove the log of error "GATT Stack failed"
2016-11-24 15:14:48 +08:00
Tian Hao
225e31b6de
component/bt : change gatt client arg to union
...
1. decrease the args memory occupy
2. change some macro name
2016-11-23 21:27:05 +08:00
Tian Hao
85aac3afa6
component/bt : decrease callback cb param size
...
1. decrease callback cb param size
2. add write in gatt server demo
2016-11-23 15:34:21 +08:00
Tian Hao
9ec0fea8e1
component/bt : gatt arg use union
...
1. union is 28 bytes for each btc task msg arg
2. as gap, individual arg(not use union) is the best mem occupy.
2016-11-23 13:45:21 +08:00
Tian Hao
6cae05d058
component/bt : change gap btc args to union
...
1. change gap btc args to union to decrease the dram occupied by btc args
2. actually use individual args for every action is the best way(decrease the dram occupy), but for writing code easily and the style, use union
3. gatt server/client should do the same work
2016-11-22 21:50:26 +08:00
Tian Hao
db007fbb2e
component/bt : clean up the demos
...
1. cleanup gatt client demo
2. cleanup gatt server demo
3. cleanup blufi demo
4. use correct log level
2016-11-22 20:32:45 +08:00
Tian Hao
190b6d629b
component/bt : Config for choose printf
...
1. add print or ets_print
2. as print format error, add -Wno-error=format
2016-11-22 18:19:55 +08:00
Tian Hao
595bd2e3c4
component/bt : gatt client fix search service bug
...
1. fix search service bug
2. delete some print
2016-11-22 17:26:30 +08:00
Tian Hao
3b432735c6
component/bt : fix advertising data and refer bug
2016-11-21 22:38:00 +08:00
Yulong
4079d1e008
component/bt : fix hci reassemble bug as cf2d19
2016-11-21 15:11:34 +08:00
Tian Hao
fc6be12a8f
component/bt : open privacy support
2016-11-21 15:06:12 +08:00
Tian Hao
4ed6404e9f
Merge remote-tracking branch 'remotes/origin/feature/btdm_arch_debug1' into feature/btdm_arch
...
# Conflicts:
# components/bt/bluedroid/api/include/esp_gatt_defs.h
# components/bt/bluedroid/btc/profile/std/gap/btc_gap_ble.c
2016-11-21 14:50:51 +08:00
wangmengyang
d833293581
component/bt: play of audio stream functionally works
2016-11-21 12:21:37 +08:00
Tian Hao
bf20b958a9
component/bt : fix rsp convert
2016-11-21 12:11:47 +08:00
Yulong
1561c02ba9
component bt:Add stop scan API to the esp_gap_ble API module
2016-11-19 09:56:36 -05:00
Yulong
a76b65ed95
compnent bt:debug the btc_gattc received data error issues.
2016-11-19 08:00:08 -05:00
Tian Hao
0245a2028c
component/bt : gatts fix
...
1. gatt server demo
2. gatt server fix bug(bta btc covert bug)
3. fix print lost
2016-11-18 22:10:35 +08:00
Yulong
3edcd29a83
compoent bt:debug the btc_gap_ble module, fix the adv len not long fix
2016-11-18 05:00:47 -05:00
Yulong
2f7288ff03
component bt:debug the scan result and add the resove adv data method to the gapapi
2016-11-18 03:43:51 -05:00
Tian Hao
37365cef95
component/bt : gatt server
...
1.add gatt server demo for user
2. some function didn't be tested
2016-11-18 00:30:35 +08:00
Yulong
645717b147
Merge remote-tracking branch 'origin/feature/btdm_arch' into feature/btdm_arch_debug1
2016-11-17 08:08:19 -05:00
Yulong
7548b8c622
component bt: Added the client demo to the bt project
2016-11-17 06:37:56 -05:00
wangmengyang
cd6d6c6280
component/bt: Cut down RAM cost: reduce SDP data record number
2016-11-17 14:01:38 +08:00
Tian Hao
a35e2d42f0
Merge remote-tracking branch 'remotes/origin/feature/btdm_arch_debug1' into feature/btdm_arch
...
1. merge to fix gap modify
2016-11-17 11:28:10 +08:00
Tian Hao
aafaebefb4
component/bt : move blufi to new architecture btc task
...
1. move blufi to new architecture
2. delete some log trace
2016-11-16 22:11:59 +08:00
wangmengyang
47486db37b
component/bt: implement UIPC API functions according to esp_audio component
2016-11-16 22:00:18 +08:00
Yulong
a63383dd19
component bt:change the scan rsp callback & scan param setup
2016-11-16 06:50:44 -05:00
Tian Hao
9691fe9dae
component/bt : init api
...
1. use future to redefine init api
2016-11-16 16:26:02 +08:00
Tian Hao
8fed003ce5
component/bt : main api
...
1. use blufi check main api ok
2016-11-16 11:28:41 +08:00
wangmengyang
1fdaf74c4f
component/bt: bug fix for HCI packet reassmebler
...
1. bug fix for HCI packet reassmebler; audio stream can be received;
2. fix some log message typos
2016-11-16 11:05:55 +08:00
Tian Hao
21d2b78105
component/bt : mv some define to btc
...
1. Actually, btc & api are the same module thing. So the type defined in api header file can be included by btc c/h files.
Besides, why btc & api should be separated, because that user may be aware of api and api refer defines/types, rather than other non-refer things.
All defines/types that user won't use should be put in btc directory (and define with prefix "btc_"), and which will be used by user should be defined with prefix "esp_" .
2. rename attribute value(all is value, not data)
2016-11-16 02:10:37 +08:00
Tian Hao
229df65cfc
component/bt : cleanup id/uuid define
...
1. which named uuid is esp_bt_uuid_t type
2. which named id is xxx_id_t type, such as service_id_t char_id_t, include inst & uuid
3. share include directory
2016-11-16 00:34:48 +08:00
Tian Hao
521ef3f579
component/bt : new architectecture
...
1st compile ok
2016-11-15 20:56:15 +08:00
wangmengyang
ea75dc7064
component/bt: bug fix for hci data packet reassembler
...
1. bugfix for hci data packet reassembler
2. create new file btif_avk.c originated from btif_av.c to eliminate the avrc related logic
2016-11-15 14:32:22 +08:00
wangmengyang
7b659b2741
component/bt: Merge branch 'feature/btdm_bluedroid' into feature/btdm_a2dp
2016-11-08 18:26:45 +08:00
Tian Hao
118984283a
component/bt : blufi use api
...
1. use api
2. bluetooth init/deinit/enable/disable wrap api(1st version)
3. bluetooth deinit(free resource) still some problem
2016-11-07 02:16:00 +08:00
Tian Hao
3b489f04f0
component:bt : change adv api
2016-11-06 23:58:37 +08:00
Tian Hao
224acf37f6
component/bt : api category
2016-11-05 20:40:07 +08:00
Tian Hao
084248e211
component/bt : cleanup task evt
2016-11-05 19:57:53 +08:00
Tian Hao
aa6fe04148
component/bt : cleanup the liscence header
2016-11-05 02:48:16 +08:00
Tian Hao
acda125e8b
Merge branch 'feature/btdm_prf_task' into feature/btdm_bluedroid
...
# Conflicts:
# components/bt/bluedroid/profiles/core/bt_prf_sys_main.c
# components/bt/bluedroid/profiles/core/bt_prf_task.c
# components/bt/bluedroid/profiles/core/include/bt_prf_sys.h
# components/bt/bluedroid/profiles/core/include/bt_prf_task.h
# components/bt/bluedroid/profiles/esp/include/wx_airsync_prf.h
# components/bt/bluedroid/profiles/esp/wechat_AirSync/wx_airsync_prf.c
# components/bt/bluedroid/stack/btm/btm_sec.c
2016-11-04 19:32:47 +08:00
wangmengyang
d4d34c1457
component/bt: move bta_av_co.c out to example directory
2016-11-04 18:33:57 +08:00
wangmengyang
ecafe5306f
component/bt: enable some AVDT macros and minor issue fixes for btif;
2016-11-04 18:27:26 +08:00
Yulong
b83b0ed06a
commpnent bt:Added the stop advertising to the bt project
2016-11-04 05:36:32 -04:00
Yulong
1544965b21
componet bt:debug the advertising issues,it can works in this version
2016-11-04 04:52:23 -04:00
wangmengyang
30198ee8c1
component/bt: add new example for A2DP
...
1. add new example for A2DP and the related btif layer source code is ported
2. modification on osi_alarm_new API to support periodic timer
3. enable macro BTA_AR_INCLUDED, BTA_AV_INCLUDED, BTA_AV_SINK_INCLUDED
4. The A2DP example cannot work and can only be built successfuly
2016-11-04 15:08:30 +08:00
Yulong
90d9f1a74e
component bt:debug the profile task can work
2016-11-04 02:34:52 -04:00
Yulong
c377650cdd
component bt:Added the profile task to the bt project
2016-11-03 04:27:44 -04:00
wangmengyang
2d21f3c501
component/bt: transport bludroid bta/av and bta/ar modules to stack
...
note: callout functions defined in bta_av_co.c are temporarily removed;
2016-11-02 19:40:46 +08:00
Yulong
cdd65095e3
component bt:Change the wx_airsync_prf to the new API function
2016-11-02 06:48:17 -04:00
Yulong
bc604d14ff
component bt: Change the battery function to the new API function
2016-11-02 06:14:02 -04:00
wangmengyang
e3a4f23c9d
component/bt: transport bluedroid avct, avdt, avrc and a2dp module to stack
2016-11-02 17:42:26 +08:00
Yulong
a0007ceb79
component bt:Change the HIDD profile function to the new api function
2016-11-02 03:45:00 -04:00
Yulong
2cea783ca1
component bt:Added the app_button event process function to the bt project
2016-11-02 02:21:31 -04:00
yulong
97c75a88ae
component bt:Change the button profile function to the new API function
2016-11-02 02:05:30 -04:00
yulong
bc834820bb
Merge remote-tracking branch 'origin/feature/btdm_api' into feature/btdm_wechat_prf
2016-11-01 07:16:54 -04:00
Tian Hao
66b31b89ac
Merge branch 'feature/btdm_gap' into feature/btdm_bluedroid
...
# Conflicts:
# examples/07_blufi/components/bluedroid_demos/app_project/SampleClientProject.c
# examples/07_blufi/components/bluedroid_demos/app_project/SampleServerProject.c
# examples/07_blufi/components/bluedroid_demos/include/bt_app_common.h
2016-11-01 14:19:38 +08:00
Tian Hao
cb33e2a5ae
Merge branch 'feature/btdm_blufi' into feature/btdm_bluedroid
...
# Conflicts:
# components/bt/bluedroid/bta/dm/bta_dm_pm.c
# components/bt/component.mk
# examples/07_blufi/components/bluedroid_demos/app_core/bt_app_core.c
# examples/07_blufi/components/bluedroid_demos/app_project/SampleServerProject.c
2016-11-01 14:01:49 +08:00
yulong
c85be70b9f
component bt:Add the CLASSIC_BT_INCLUDED Macro to the project
2016-11-01 00:07:34 -04:00
wangmengyang
a8b2608dd9
component/bt: merge SDP client and SDP server example to a single demo
2016-11-01 11:54:01 +08:00
wangmengyang
124a673a78
component/bt: legacy bt API provide
...
1. move btif module out of bluetooth stack
2. provide new APIs in bluedroid/stack_api
2016-10-31 21:40:01 +08:00
yulong
3053518f8a
component bt:modified the API format to the standard format
2016-10-31 06:55:54 -04:00
wangmengyang
2d15803f70
component/bt: add new demo for Bluetooth SDP client
...
1. add Bluetooth SDP client demo;
2. some minor typo fixes
2016-10-31 12:34:11 +08:00
wangmengyang
0933339e4b
component/bt: add new demo for bluetooth SDP server
...
1. add bluetooth SDP server demo
2. some minor typo fixes
2016-10-28 15:48:27 +08:00
yulong
d6db871068
component bt:Change the profile function method to new API
2016-10-28 01:54:42 -04:00
yulong
5ede46f213
component bt:Change the profile & app interface to new API
2016-10-26 08:19:48 -04:00
Tian Hao
45638b3f98
component/bt : use LOG_XXX instead of print
2016-10-26 15:57:40 +08:00
wangmengyang
47d73dfe05
component/bt: implement some APIs for bluetooth SDP, GAP and stack manager
...
1. add bt profile task(temporarily called btif task)
2. add GAP API to set BT scan mode
3. port btif/SDP module
4. port btif stack manager
2016-10-26 11:25:24 +08:00
yulong
78d1fd5306
component bt:Added the BLE scan API to the bt project
2016-10-25 05:07:36 -04:00
Tian Hao
20d33d636b
component/bt ; add notify
2016-10-25 15:05:08 +08:00
Tian Hao
8e247f3b4c
component/bt : delete extra GATTAPP_REGISTER
2016-10-24 20:07:19 +08:00
Tian Hao
5fbfa2a01d
blufi cleanup the bad things
2016-10-24 17:08:37 +08:00
wangmengyang
be11f598bf
component/bt: fix logging format for some source files of BTM module
2016-10-24 16:17:55 +08:00
wangmengyang
063e9e8287
component/bt: Merge branch 'feature/btdm_bluedroid' into feature/bt_gap
2016-10-21 15:19:39 +08:00
wangmengyang
2c0ceb484b
component/bt: Bluedroid BTA/SDP module is ported
2016-10-21 15:12:22 +08:00
yulong
94442708f5
component bt:added the advertising & scanning API to the bt project
2016-10-21 02:16:01 -04:00
yulong
fcf664276f
component bt:added the stop adverstising API to the BTA module
2016-10-19 01:55:14 -04:00
Tian Hao
24df5e2041
component/bt : cleanup ^M
...
someone use editor in windows, so use "LF" in your editor, please.
2016-10-18 21:49:00 +08:00
yulong
2182b69b3d
component bt:added the button profile event & process method to the project
2016-10-18 05:22:36 -04:00
wangmengyang
9476dc2eb8
components/bt: Merge branch 'feature/wechat_prf' into feature/btdm_bluedroid
...
warning: example 07 has complier errors;
# Conflicts:
# components/bt/bluedroid/profiles/esp/ble_button/button_pro.c
# components/bt/bluedroid/stack/btu/btu_init.c
2016-10-17 23:06:33 +08:00
yulong
2fdd9ba930
component bt:change the hid profile & bt_profile task
2016-10-17 02:15:36 -04:00
yulong
7cb55c2c6c
component bt: added the WX_AIRSYNC_CFG macro to control the wechat profile
2016-10-16 23:54:22 -04:00
Tian Hao
f87ebb6d49
Merge branch 'feature/btdm_blufi' into feature/btdm_bluedroid
...
# Conflicts:
# components/bt/bluedroid/stack/btu/btu_task.c
2016-10-16 17:08:05 +08:00
yulong
1a08abea78
component bt:1.update the BLE hid to the project
...
2.update the app adverting method
2016-10-15 06:28:54 -04:00
yulong
02ad223eea
component bt: 1.modified the btu buffer size from 15 to 60;
...
2.change the smp method
2016-10-15 05:46:10 -04:00
yulong
f68c8dd687
commponant bt:change bt_app_main to app_main
2016-10-14 04:44:56 -04:00
yulong
af9b08d863
commponent bt:1.added the bt_prf_sys_main.c file which has been process the profile task event method;
...
2.modified the thread.h file==> added the profile task event in it
3.modified bt_prf_task.c==>added the ready function in it
4.added the bt_prf_sys.h file
5.remove the profile_sys.h file
2016-10-13 09:13:21 -04:00
yulong
65445b21dd
commponent bt:1.add bt_prf_act.c file for the state machine
...
2.add the bt_app_api.h file
3.modified the bt_prf_task.c==>added the free & start task function
2016-10-13 04:02:30 -04:00
yulong
c56325f43b
commponent bt:added the bt_prf_evt.h file defined the API event used for the profile task
2016-10-12 05:28:01 -04:00
yulong
3c792f427b
commponent bt:add bt_prf_task.c file for proceess the profile task event
...
add bt_prf_task.h for defined the data & struct used for the profile task
add prodile_sys.h defined the profile system data used for profile task
modified component.mk
2016-10-12 03:38:26 -04:00
yulong
849ba39544
commponent bt:add the wechat airsync profile to the project
...
1. add the wx_airsync_prf.h which have been define the sturcter data has been
used for the wechat airsync profile database
2. add the wx_airsync_prf.c file
3. add the app_airsync_md5.c file
4. add the app_airsync_prf.c
5. add epb.c file
6. add epb_mmbp.c
7. add mpbledemo2.c
8. add wechar_crc.c
9 add wechat_aes.c
10. add app_airsync_md5.h
11. add app_airsync_prf.h
12. add app_wechat_util.h
13. add epb.h
14. add epb_mmbp.h
15 add mpbledemo2.h
16 add wechar_crc.h
17 add wechat_aes.h
2016-10-11 05:43:36 -04:00
wangmengyang
bde768f13c
1. Recover "future_t" model implementation using semaphore to allow for blocking function
...
2. Recover BTU task start-up/shut-down procedure according to original bluedroid implementation
2016-10-10 21:34:21 +08:00
wangmengyang
0b30c22162
recover semaphore in fixed_queue to control the queue capacity
2016-10-10 20:37:26 +08:00
wangmengyang
833eb88679
minor bug fixes for releasing bluedroid task events and deleting message queue
2016-10-10 20:16:30 +08:00
Tian Hao
e32d4e546a
component/bt : advertising no random address
...
1. advertising with public bdaddr
2. increase queue size avoid for exception because of the log is a lot
2016-10-10 19:21:12 +08:00
Tian Hao
eb8cb8d22e
component/bt : add bluf that use bluetooth config wifi connection demos
...
1. add libphy.a librtc.a, but store in bt submodule, if someone use them, please copy to esp32/lib/ instead the origin one
2. add 07_blufi demo
3. change esp32/Kconfig to allow bt/wifi coexist
2016-10-07 11:16:13 +08:00
Tian Hao
1c877be609
component/bt : modify some files adapt to new master
...
1. fix some header files include
2. modify demo
2016-10-07 10:47:25 +08:00
Tian Hao
6c793cb8eb
component/bt : adjust the bluedroid architecture
...
1. move the app demo code to example
2. move the header files to correct path
3. move profile to profiles directory and seperate esp&std
4. some other codes
5. needs continue to cleanup the code
2016-09-27 21:38:07 +08:00
Tian Hao
b80325604d
component/bt: add bluedroid 1st version
...
1. add bluedroid 1st version
2. alarm adapter
3. task semaphore lock
4. other bugs resolved
2016-09-26 21:37:39 +08:00