baohongde
d07b9e97d7
components/coex: Fix a2dp stuck after creating anther connection
2020-02-19 11:48:33 +08:00
baohongde
78ecc043d5
Improve coexistence performance according to specific WiFi/BT/BLE scienario
...
1. Improve WiFi performance in some Classic BT scienario(idle, inquire scan,
connecting, connected, sniff, a2dp pause, etc).
2. Support WiFi + Classic BT + BLE mesh coexistence scienario.
3. Improve WiFi scan and connect performance in coexistence scienario.
2020-02-18 12:40:48 +08:00
baohongde
c48a94d4a8
components/mesh: Fix some bugs about mesh
...
fix send acl pkt after ble have sent terminate ind
modify min adv interval to 10ms
2020-02-18 11:07:16 +08:00
baohongde
6f4e257601
Increase TCP send buffer and receive window limitation when TCP window scale is enabled
2020-02-18 11:06:15 +08:00
Angus Gratton
2fdb56e741
Merge branch 'feat/mcpwm_hal_fixes_v4.0' into 'release/v4.0'
...
mcpwm: add HAL layer support (fix part, backport v4.0)
See merge request espressif/esp-idf!7105
2020-02-18 09:45:13 +08:00
Jiang Jiang Jian
0f64291700
Merge branch 'bugfix/backport_some_wifi_bugs_0107_v4.0' into 'release/v4.0'
...
backport some Wi-Fi bugs 0107 (backport v4.0)
See merge request espressif/esp-idf!7260
2020-02-17 20:44:50 +08:00
Michael (XIAO Xufeng)
9037b8fb52
mcpwm: decrease test time
...
cherry-pick 538540ce
2020-02-15 23:10:33 +08:00
michael
0f10d12b81
mcpwm: fix the fault handling and capture issues
...
1. The fault signal 3 for unit 2 is corrected to the right value
2. Now `mcpwm_fault_set_oneshot_mode` will clear the status before, no
need to reset the peripheral.
3. The capture feature relies on the prescaler, but it's only
initialized in the mcpwm_init funciton, which is used to initialize a
PWM channel. This means, the capture may not work correctly if no PWM
channel is enabled.
Now the prescaler is also updated when `mcpwm_capture_enable` is
called.
2020-02-15 18:39:28 +08:00
michael
8c148ede22
mcpwm: enable some unit tests again
2020-02-15 18:39:27 +08:00
Jiang Jiang Jian
f92534f95d
Merge branch 'bugfix/btdm_error_type_in_config_eir_evt_v4.0' into 'release/v4.0'
...
components/bt: Fix error EIR type in config eir event
See merge request espressif/esp-idf!7407
2020-02-14 16:41:58 +08:00
xiehang
d2af36c9fb
lwip: Drop packets larger than MTU
2020-02-14 12:03:49 +08:00
zhangyanjiao
5894e049bc
esp_wifi: fix some WiFi issues
...
Fix following WiFi issues:
1. Fix WiFi buffer reload issue
2. Fix AMSDU decrypt issue
3. Fix some WiFi timer issues
4. Fix the crash caused by too big of association request RSN information
5. Fix the crash caused by block scan
6. Fix the bug for getting channel and bandwidth
7. Fix some Sniffer bugs
8. Fix some ESP-NOW issues
1> fix the bug when modifying the channel info of peer node
2> fix the crash when modifying peer node between unencrypted and encrypted
3> fix the bug for fetch peer
4> modify the esp_wifi_set_channel() function
5> fix the bug that the channel parameter doesn't work when adding peer node
Closes https://github.com/espressif/esp-idf/issues/2833
Closes https://github.com/espressif/esp-idf/issues/4311
2020-02-14 12:03:18 +08:00
Jiang Jiang Jian
50b686bfb4
Merge branch 'bugfix/fix_performance_issues_new_v4.0' into 'release/v4.0'
...
esp_wifi: fix WiFi performance issue (backport v4.0)
See merge request espressif/esp-idf!7227
2020-02-14 11:47:06 +08:00
Xia Xiaotian
0a2bec85f3
soc: clear PHY status when cpu start
2020-02-13 14:36:11 +08:00
Jiang Jiang Jian
b6bec84c6e
Merge branch 'bugfix/ble_mesh_utf_8_comma_4_0' into 'release/v4.0'
...
ble_mesh: Kconfig included a UTF-8 comma (v4.0)
See merge request espressif/esp-idf!7576
2020-02-13 11:13:02 +08:00
Jiang Jiang Jian
fb924ece79
Merge branch 'bugfix/btdm_fix_multi_open_evt_and_clear_blufi_prepare_write_len' into 'release/v4.0'
...
component/bt: fix multi open evt and clear blufi prepare write len(backport v4.0)
See merge request espressif/esp-idf!7324
2020-02-13 11:08:41 +08:00
Jiang Jiang Jian
e07a64925b
Merge branch 'bugfix/coex_bt_ble_stuck_v4.0' into 'release/v4.0'
...
components/bt: Fix A2DP stuck when BLE's interval is too small
See merge request espressif/esp-idf!7220
2020-02-13 11:08:20 +08:00
Jiang Jiang Jian
e07ecea868
Merge branch 'hfp_a2dp_iphone_4.1' into 'release/v4.0'
...
components bt/: Disable sniff mode during (e)SCO connection for HFP. [backport 4.0]
See merge request espressif/esp-idf!7249
2020-02-13 11:08:10 +08:00
Jiang Jiang Jian
5b9cb366c2
Merge branch 'bugfix/fix_airkiss_bug_v4.0' into 'release/v4.0'
...
fix the bug for Airkiss
See merge request espressif/esp-idf!7346
2020-02-13 11:07:41 +08:00
Jiang Jiang Jian
d5bd2256f4
Merge branch 'bugfix/fix_ble_mesh_memory_leak_v4.0' into 'release/v4.0'
...
ble_mesh: Fix memory leak when node is reset (v4.0)
See merge request espressif/esp-idf!7278
2020-02-13 10:58:09 +08:00
Jiang Jiang Jian
c235640bf4
Merge branch 'bugfix/ble_mesh_update_lightness_last_v4.0' into 'release/v4.0'
...
ble_mesh: Update lightness last state when actual state is changed (v4.0)
See merge request espressif/esp-idf!7281
2020-02-13 10:58:06 +08:00
Jiang Jiang Jian
6193a439a3
Merge branch 'bugfix/sync_zephyr_v2.0_ble_mesh_fixes_v4.0' into 'release/v4.0'
...
ble_mesh: sync Zephyr v2.0 ble mesh fixes (v4.0)
See merge request espressif/esp-idf!7300
2020-02-13 10:58:03 +08:00
liu zhifu
a3cd5ab1ae
esp_wifi: improve WiFi performance
2020-02-13 10:50:48 +08:00
lly
04fc15a4f3
ble_mesh: Fix memory leak when node is reset
...
When node is being reset, the init functions of each sig-defined
models will be invoked again, this will cause memory leak because
some model internal data will be allocated again.
Hence before trying to allocate memory for them, we add some check
to make sure no memory has been allocated previously.
And for client model, when the init functions are invoked again,
we will clear the list items.
2020-02-12 12:03:31 +00:00
lly
e95b59c089
ble_mesh: Kconfig included a UTF-8 comma
2020-02-12 18:28:06 +08:00
Angus Gratton
91dc4d78f8
Merge branch 'bugfix/select_driver_not_installed_v4.0' into 'release/v4.0'
...
VFS: Check in select() if the UART driver is installed or not (v4.0)
See merge request espressif/esp-idf!7417
2020-02-11 12:08:48 +08:00
Angus Gratton
2bee223250
Merge branch 'bugfix/part_gen_subtype_fix_v4.0' into 'release/v4.0'
...
partition_table: Fix subtype in gen_esp32part.py (v4.0)
See merge request espressif/esp-idf!7536
2020-02-11 12:06:25 +08:00
Mahavir Jain
8df70a1728
cJSON: include only source file objects for cmake build
...
Test file can cause build issues in some cases, since it has its own main() function
2020-02-10 17:32:26 +05:30
boarchuz
8c88f0f1f6
Fix subtype in PartitionTable.find_by_type
...
Fix ptype->subtype
Closes https://github.com/espressif/esp-idf/pull/4723
2020-02-10 12:04:45 +01:00
Ivan Grokhotkov
313c1ed1ba
Merge branch 'bugfix/esp_log_from_critical_v4.0' into 'release/v4.0'
...
intr_alloc: don't call ESP_LOG from a critical section (backport v4.0)
See merge request espressif/esp-idf!7159
2020-02-10 17:34:53 +08:00
Ivan Grokhotkov
0c2c821f8f
Merge branch 'bugfix/esp_ptr_executable_single_core_v4.0' into 'release/v4.0'
...
soc: Fix esp_ptr_executable() for single core ESP32 config & cache memory (v4.0)
See merge request espressif/esp-idf!7464
2020-02-10 16:30:34 +08:00
Ivan Grokhotkov
f5dc81aaae
Merge branch 'bugfix/panic_cache_err_dig_reset_v4.0' into 'release/v4.0'
...
esp32: panic: do digital reset if cache error interrupt is set (backport v4.0)
See merge request espressif/esp-idf!7484
2020-02-10 16:30:02 +08:00
Angus Gratton
3f76083e8c
Merge branch 'bugfix/several_ethernet_bugfix_from_4.1' into 'release/v4.0'
...
Ethenret driver bugfix and optimization (4.0)
See merge request espressif/esp-idf!7426
2020-02-06 14:38:47 +08:00
Hrudaynath Dhabe
8f0f3e8f88
WPS_CONFIG_INIT_DEFAULT(type) error
2020-02-06 14:06:38 +08:00
Ivan Grokhotkov
4ce7b666a6
esp32: panic: do digital reset if cache error interrupt is set
...
Even if frame->exccause != PANIC_RSN_CACHEERR, it is possible that
the cache error interrupt status is set. For example, this may happen
due to an invalid cache access in the panic handler itself.
Check cache error interrupt status instead of frame->exccause to
decide whether to do CPU reset or digital reset.
Also remove unnecessary esp_dport_access_int_pause from
esp_cache_err_get_cpuid, since the panic handler already calls
esp_dport_access_int_abort on entry.
2020-01-30 12:28:22 +01:00
Angus Gratton
f27a344fc9
Merge branch 'bugfix/parttool_backtraces_v4.0' into 'release/v4.0'
...
parttool: Avoid unnecessary exception backtrace for legitimate errors (v4.0)
See merge request espressif/esp-idf!7463
2020-01-30 13:36:52 +08:00
Angus Gratton
a61fd1e42b
Merge branch 'bugfix/esp_timer_stucks_into_esp_timer_impl_set_alarm_v4.0' into 'release/v4.0'
...
esp_timer/esp32: Fix esp_timer_impl_set_alarm() when CPU and APB freqs are changed (v4.0)
See merge request espressif/esp-idf!7304
2020-01-29 14:25:27 +08:00
Angus Gratton
d897e522af
soc: Fix esp_ptr_executable() for single core ESP32 config & cache memory
...
In single core mode, APP CPU cache region is added to the available range.
2020-01-29 10:03:30 +11:00
Angus Gratton
59649ea825
parttool: Fix regression when parsing binary partition data
...
Regression in a91de43537f8a76a78d9576d7ab0e2378c374f07
2020-01-29 09:40:23 +11:00
Angus Gratton
bdb0851065
parttool: Avoid unnecessary exception backtrace for legitimate errors
...
Previous version used exception handling for program control flow,
which makes for long and confusing backtrace messages if an error
occurs while parsing the CSV (as it also prints the phony error that
occurred while trying to parse as a binary, then prints
"During handling of the above exception, another exception occurred:",
then prints the real error).
Use the same heuristic that is applied in gen_esp32_part, instead.
Also, avoid printing the entire backtrace if the error is a gen_esp32_part
InputError, same as gen_esp32part does.
Found while looking into https://github.com/espressif/esp-idf/issues/4474
2020-01-29 09:40:22 +11:00
KonstantinKondrashov
9a24d95907
esp_timer/esp32: Fix case when alarm_reg > counter_reg but FRC_TIMER_INT_STATUS is not set
...
Closes: WIFI-1576
Closes: https://github.com/espressif/esp-idf/issues/2954
2020-01-28 21:41:27 +08:00
Angus Gratton
08219f3cf5
Merge branch 'bugfix/esp_tls_blocking_timeout_v4.0' into 'release/v4.0'
...
esp-tls: add timeout for blocking connection (v4.0)
See merge request espressif/esp-idf!7396
2020-01-22 11:44:48 +08:00
Angus Gratton
b324ab9c6e
Merge branch 'bugfix/mqtt_submodule_ref_update_v4.0' into 'release/v4.0'
...
mqtt: update submodule to point to latest commit (backport 4.0)
See merge request espressif/esp-idf!7276
2020-01-22 11:29:34 +08:00
morris
93e5a31685
ethernet: always put eth_driver handle in SRAM
...
Closes https://github.com/espressif/esp-idf/issues/4635
2020-01-21 21:30:34 +08:00
morris
01cc5a38cc
ethernet: work with cache disabled
2020-01-21 21:30:18 +08:00
morris
7b128595ac
ethernet: optimise tx and rx
2020-01-21 20:51:03 +08:00
Roland Dobai
642dc19c25
VFS: Check in select() if the UART driver is installed or not
...
Closes https://github.com/espressif/esp-idf/issues/4627
2020-01-21 10:11:08 +01:00
baohongde
e38c080f79
components/bt: Fix error EIR type in config eir event
2020-01-20 21:50:01 +08:00
David Cermak
c7e1416174
esp_tls: added connection timeout to esp_tls_conn_new_sync()
2020-01-20 07:26:51 +01:00
David Cermak
e0c88dbd73
esp_tls: fail connection if esp_tls_conn_new() timeouts
2020-01-20 07:08:40 +01:00