* Removed cxx exception frequent intr unit test
It sometimes stalled by too frequent interrupts
in some configurations, causing CI trouble.
* Opened Jira IDF-2144 for further investiation
1. The 2nd bootloader always call `rom_spiflash_unlock()`, but never help to clear the WEL bit when exit. This may cause system unstability.
This commit helps to clear WEL when flash configuration is done.
**RISK:** When the app starts, it didn't have to clear the WEL before it actually write/erase. But now the very first write/erase operation should be done after a WEL clear. Though the risk is little (all the following write/erase also need to clear the WEL), we still have to test this carefully, especially for those functions used by the OTA.
2. The `rom_spiflash_unlock()` function in the patch of ESP32 may (1) trigger the QPI, (2) clear the QE or (3) fail to unlock the ISSI chips.
Status register bitmap of ISSI chip and GD chip:
| SR | ISSI | GD25LQ32C |
| -- | ---- | --------- |
| 0 | WIP | WIP |
| 1 | WEL | WEL |
| 2 | BP0 | BP0 |
| 3 | BP1 | BP1 |
| 4 | BP2 | BP2 |
| 5 | BP3 | BP3 |
| 6 | QE | BP4 |
| 7 | SRWD | SRP0 |
| 8 | | SRP1 |
| 9 | | QE |
| 10 | | SUS2 |
| 11 | | LB1 |
| 12 | | LB2 |
| 13 | | LB3 |
| 14 | | CMP |
| 15 | | SUS1 |
QE bit of other chips are at the bit 9 of the status register (i.e. bit 1 of SR2), which should be read by RDSR2 command.
However, the RDSR2 (35H, Read Status 2) command for chip of other vendors happens to be the QIOEN (Enter QPI mode) command of ISSI chips. When the `rom_spiflash_unlock()` function trys to read SR2, it may trigger the QPI of ISSI chips.
Moreover, when `rom_spiflash_unlock()` try to clear the BP4 bit in the status register, QE (bit 6) of ISSI chip may be cleared by accident. Or if the ISSI chip doesn't accept WRSR command with argument of two bytes (since it only have status register of one byte), it may fail to clear the other protect bits (BP0~BP3) as expected.
This commit makes the `rom_spiflash_unlock()` check whether the vendor is issi. if so, `rom_spiflash_unlock()` only send RDSR to read the status register, send WRSR with only 1 byte argument, and also avoid clearing the QE bit (bit 6).
3. `rom_spiflash_unlock()` always send WRSR command to clear protection bits even when there is no protection bit active. And the execution of clearing status registers, which takes about 700us, will also happen even when there's no bits cleared.
This commit skips the clearing of status register if there is no protection bits active.
Also move the execute_flash_command to be a bootloader API; move
implementation of spi_flash_wrap_set to the bootloader
Note: besides the esp-netif component, this commit also disables
net_sockets.c from mbedtls, which is one of the base components and uses BSD API (not specifically lwIP). This might be refactored to use CONFIG_SUPPORT_BSD_API instead of CONFIG_ESP_NETIF_TCPIP_LWIP
in the future.
It also disables smartconfig_ack.c and wifi_init.c from esp_wifi
component for referencing some lwIP config options (smartconfig_ack.c changes might be also
updated to check CONFIG_SUPPORT_BSD_API)
Merges https://github.com/espressif/esp-idf/pull/5856
When idf.py gdb starts, it expects openocd was started in the background
and creates a thread to watch for openocd errors. when gdb target exits,
the debug_ext.py aims to cleanup all threads and processes, but fails
with traceback if openocd-watch thread not available, which could happen
if openocd started separately.
Per WiFi library requirement, SSID can be non-null terminated string
if its length goes to 32 bytes (maximum). Use of strncpy in this case,
along with compiler optimization level -O2 results in some warnings
for potential use of non-null terminated strings.
Fix here ensures use of memcpy to copy SSID string upto appropriate
desired length. This helps to avoid compiler specific workaround
flags added earlier.
Closes https://github.com/espressif/esp-idf/issues/5866
Closes IDFGH-3983
Commit 5e8795eebe has changed the partition table offset, which
has resulted in the ciphertext not matching the one expected in the
example test.
Fix by calculating the ciphertext using espsecure.py.
This prevents starting a new shell with the IDF environment like this:
env IDF_PATH=/my/idf/path fish -C 'source "$IDF_PATH"/export.fish'
as `status current-command` returns `fish` in this case, but this check expects
`source`.
This check does nothing anyway, as you can't even execute that file even if it
was marked executable, as fish rejects files without a shebang, and it's not
valid bash.
Closes https://github.com/espressif/esp-idf/pull/5860
Currently USB CDC Download requires the `--no-stub` option of `esptool`. This change inverts the Kconfig option to negative, so that it can be `selected` by other options or enabled in applications through `sdkconfig.defaults`.
