Commit Graph

18 Commits

Author SHA1 Message Date
Cao Sen Miao
d9f01ed43c spi_flash: bringup for esp32c6 2022-11-09 12:50:46 +08:00
wuzhenghui
1d299a8976 esp32c6: add hal support 2022-09-01 12:37:51 +08:00
Omar Chebib
5bcd9b2db8 G0: RISC-V targets have now an independent G0 layer
G0 doesn't depend on any G1+ layer for RISC-V based targets
2022-06-14 15:00:53 +08:00
Cao Sen Miao
4418a855ba spi_flash: refactor the spi_flash clock configuration, and add support for esp32c2 2022-04-26 15:22:37 +08:00
Omar Chebib
f772d78317 hal: Remove dependency on log component
hal component (G0) doesn't depend on log component (G1) anymore in G0-only applications.
2022-04-18 10:35:01 +08:00
Armando
a8a47a61f5 spi_flash: move buffer check from hal layer to driver layer
Prior to this change, `spi_flash_hal_supports_direct_write` and
`spi_flash_hal_supports_direct_read` will check the buffer pointer
place, which should be done in driver layer, instead of HAL layer.
2022-04-08 11:46:10 +08:00
Cao Sen Miao
6c0aebe279 esp_flash: add opi flash support in esp_flash chip driver, for MXIC 2021-09-07 14:44:40 +08:00
morris
9afdf54748 hal: added HAL_ASSERT 2021-06-22 11:28:01 +08:00
Cao Sen Miao
08f1bbe0c7 spi_flash: fix cs line setup to make the flash driver more stable 2021-06-01 16:41:41 +08:00
Armando
9b9ea71ff9 spi: remove HSPI macro on esp32c3 and esp32s3 2021-04-06 13:42:49 +08:00
Cao Sen Miao
9905da46e0 spi_flash: Add auto suspend mode on esp32c3 2021-01-25 11:14:02 +08:00
KonstantinKondrashov
1f37a5f162 spi_flash(esp32-s2): Add the workaround of a reboot issue when SPI HW suspend is enabled 2021-01-25 11:13:38 +08:00
Angus Gratton
7c08be5771 hal: Add initial ESP32-C3 support
From internal commit 7761d6e8
2020-11-30 15:23:15 +11:00
Michael (XIAO Xufeng)
ee40f02afc esp_flash: use divider rather than hard-coded freq in init code 2020-11-10 19:09:17 +08:00
Michael (XIAO Xufeng)
3bacf35310 esp_flash: support high capacity flash chips (32-bit address) 2020-10-29 18:20:11 +08:00
Michael (XIAO Xufeng)
647dea9395 soc: combine xxx_caps.h into one soc_caps.h
During HAL layer refactoring and new chip bringup, we have several
caps.h for each part, to reduce the conflicts to minimum. But this is
The capabilities headers will be relataive stable once completely
written (maybe after the featues are supported by drivers).

Now ESP32 and ESP32-S2 drivers are relative stable, making it a good
time to combine all these caps.h into one soc_caps.h

This cleanup also move HAL config and pin config into separated files,
to make the responsibilities of these headers more clear. This is
helpful for the stabilities of soc_caps.h because we want to make it
public some day.
2020-10-17 16:10:15 +08:00
Cao Sen Miao
4ce8b59016 spi_flash: fix initialization failure when ex_flash with psram on
non-SPI1 bus.

Close https://github.com/espressif/esp-idf/issues/4379
2020-09-25 10:22:24 +08:00
Michael (XIAO Xufeng)
5425ef4ee4 hal: extract hal component from soc component 2020-09-01 13:25:32 +08:00