This commit fixes flakey task delay tests when running on IDF FreeRTOS. IN IDF
FreeRTOS, core 1's tick interrupts could be up to (< 1 tick) out of phase from
core 0's tick interrupt, thus the measured delay time on core 1 could last 1
tick longer. This commit makes the test detla 2 ticks for IDF FreeRTOS.
This commit adds a copy of upstream vanilla FreeRTOS uncrustify.cfg files from
the following upstream commit:
89e4823a49
Note: "pp_indent_brace" is commented out as that was enabled after v10.4.3
Also also added a note in the ESP-IDF style guide aobut formatting FreeRTOS
source code using Uncrustify.
This commit refactors the way stream buffers initialize their spinlock.
- "prvInitialiseNewStreamBuffer()" now initializes the stream buffer fields
manually (instead of using memset()) to avoid resetting the spin lock
- Stream buffer creation functions now manually initialize the spinlock after
the other fields are initialized using "prvInitialiseNewStreamBuffer()"
Also added comments to event group spinlock initializtion.
An explicit check of the mutex owner during a mutex release operation is
not necessary for FreeRTOS SMP as this is checked by default. Hence, the
corresponding Kconfig option is removed.
This commit fixes/ignores flakey freertos unit tests after migrating them to
the test app:
- Added vTaskDelay() before teardown to prevent memory leaks
- Adjusted the "main" task's priority so that scheudling tasks would work
- pytest now only runs tests that are not ignored
- Reset tests are temporarily ignored. Will be enabled to dedicate reset tests.
- Some flakey tests are fixed by adjusting delays and stack sizes.
This commit adds the sdkconfig files for the FreeRTOS test app. These
configurations were dervied from the various legacy unit test app's
config files that included the FreeRTOS component.
This commit tries to keep a 1 to 1 config parity with the legacy test app.
Meaning, if FreeRTOS test were run on a particular target with a particular
config, that config will be represented in one of the test app's
sdkconfig.ci.XXX files.
However, the following configurations were removed for FreeRTOS tests:
- The "freertos_flash" option was removed due to redudancy (already tested in
freertos_options)
Some tests were placed in the incorrect test groups (i.e., kernel, port,
performance etc). This commit fixes those placements.
The following redundant tests were also removed:
- "test_panic.c" as behavior is already covered in esp_system tests
This commit fixes a bug where if an unpinned task is interrupted by a level 1
ISR that users the FPU, the FPU usage will cause the interrupted task to
become pinned to the current core.
Note: This bug was already fixed in SMP FreeRTOS in commit
d69361779e. This commit simply backports the
fix to IDF FreeRTOS.
This commit refactors the existing FPU unit tests as follows
- Rename them from coproc to FPU
- Reorganize test placement
- Make existing tests work on both IDF and SMP FreeRTOS
- Update test documentation
- Remove old "test_float_in_isr.c"
This commit refactors the pxPortInitialiseStack() function of the riscv
FreeRTOS ports (both IDF and SMP FreeRTOS).
- Each stack area is now separated into their own functions
- Each function will individually
- Push the stack pointer to allocate the stack area
- Initiaze the allocated stack area
- Each stack area's size and usage is now clearly documented in code
This commit refactors the pxPortInitialiseStack() function of the xtensa
FreeRTOS ports (both IDF and SMP FreeRTOS).
- Each stack area is now separated into their own functions
- Each function will individually
- Push the stack pointer to allocate the stack area
- Initiaze the allocated stack area
- Each stack area's size and usage is now clearly documented in code
* Added port layer from the FreeRTOS POSIX port, added
additional port code for ESP-IDF.
* Created another hello world example using that POSIX
port in tools/test_apps.
* Removed old linux app
This commit adds a priority scheduling unit test to test that the scheduler
always schedules the highest priority ready state task. Single core and SMP
variants of the test are both added.
This commit adds a README.md containing guidelines on how to refactor the
FreeRTOS unit tests for upstreaming. A portTestMacro.h header was also added
which contains port implementation specific macros used by the test cases.
This commit places some functions in port.c and port_common.c into flash by
default. These functions are mostly called once during startup, thus shouldn't
affect applications much when placed into flash instead of the default IRAM.
This commit synchronizes multiple functions in tasks.c with upstream v10.4.3
that contain minor differences.
The following functions have had their parameter names or code formatting
updated:
- xTaskCreateStaticPinnedToCore()
- xTaskCreatePinnedToCore()
- prvInitialiseNewTask()
- prvTaskIsTaskSuspended()
- vTaskStartScheduler()
- xTaskResumeAll()
- xTaskCheckForTimeOut()
- uxTaskResetEventItemValue()
The following functions have had their missing "xAlreadyYielded" restored
- xTaskDelayUntil()
- vTaskDelay()
The following functions have had their critical section/interrupt disdable
usage update
- vTaskSuspendAll()
- xTaskGetTickCountFromISR()
- xTaskGetApplicationTaskTagFromISR()
This commit synchronizes multiple functions that contain major differences with
upstream v10.4.3. Multi-core modifications are then reapplied to the function.
Vanilla code uses "pxTCB == pxCurrentTCB" to check whether a task is currently
running. This commit adds the following macros instead.
- taskIS_CURRENTLY_RUNNING()
- taskIS_CURRENTLY_RUNNING_ON_CORE()
The following functions have been updated to use those macros instead.
- eTaskGetState()
- vTaskPrioritySet()
- vTaskResume()
The following functions have been synchronized with upstream v10.4.3.
Multi-core modifications are then reapplied.
- vTaskSuspend()
- vTaskDelete()
- prvGetExpectedIdleTime()
This commit synchronizes multiple functions in queue.c with upstream v10.4.3.
Multi-core modifications are then reapplied to these functions. The following
functions were modified:
prvNotifyQueueSetContainer()
xQueueGenericCreateStatic()
xQueueGenericCreate()
xQueueGetMutexHolder()
xQueueCreateCountingSemaphoreStatic()
xQueueCreateCountingSemaphore()
xQueueGenericSend()
xQueueGenericSendFromISR()
xQueueReceiveFromISR()
uxQueueMessagesWaiting()
prvUnlockQueue()
prvIsQueueFull()
xQueueAddToSet()
xQueueRemoveFromSet()
prvNotifyQueueSetContainer()
Note: The SEGGER_SYSVIEW traceQUEUE_SEND() macro was updated as the
xCopyPosition argument is no longer available in scenarios where the
macro is called.
This commit fixes the function declaration naming from esprv_intc_set_threshold()
to esprv_intc_int_set_threshold(), thus allowing the underlying ROM funciton to be
exposed via the header.
