Warn if IDF_PYTHON_ENV_PATH set to a suspicious path with
different ESP-IDF version and/or Python version.
Fail if the virtual environment was created for a different ESP-IDF
version.
Closes https://github.com/espressif/esp-idf/issues/13196
Some additional checks related to secure version of the application in
anti-rollback case have been added to avoid any attempts to boot lower
security version but valid application (e.g., passive partition image).
- Read secure_version under sha256 protection
- First check has been added in the bootloader to ensure correct secure
version after application verification and loading stage. This check
happens before setting up the flash cache mapping and handling over
the final control to application. This check ensures that application
was not swapped (e.g., to lower security version but valid image) just
before the load stage in bootloader.
- Second check has been added in the application startup code to ensure
that currently booting app has higher security version than the one
programmed in the eFuse for anti-rollback scenario. This will ensure
that only the legit application boots-up on the device for
anti-rollback case.
Currently we silently ignore when the original component is not found
in a hope we can provide at least some meaningful hint. As it turned
out it's not true. Instead of providing misleading hint, just return
error. This adds several checks for situations, which should not happen,
but when they do it should be easier to identify the root cause of the
problem.
For example when hint module received malformed output with extra new
lines, e.g. caused by a bug in RunTool, it wrongly reported the original
component as source component.
This should also fix the tests on Windows.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Currently the component_requirements hint module does not work
as expected if the component list for a project is trimmed down.
With the new "all_component_info" dictionary info in project_description.json,
the module can produce hints even if cmake's COMPONENTS variable is
set.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Add new "all_component_info" dictionary into the
project_description.json file. It contains information about all
registered components presented in the __COMPONENT_TARGETS list.
Since components in this list are not fully evaluated, because only the first
stage of cmakefiles processing is done, it does not contain the same information
as the "build_component_info" dictionary. The "type", "file" and "sources" variables
are missing.
Most of the properties are already attached to the component target, so
this only adds INCLUDE_DIRS property to the target during the first cmakefiles
processing stage.
The "all_component_info" dict is generated in a separate function, even
though the original function for "build_component_info" could be
adjusted. This introduces a little bit of boilerplate, but keeps it
logically separated and probably easier if we want to extend it in the
future.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
If there is a component(child) within a component(parent), like for test_apps, the parent
component may be wrongly identified as source component for the failed include. This may
lead to a false bug report if the parent component has component, which provides the missing
header, in requirements.
Fix this by looking for the longest matching source component directory.
Suggested-by: Ivan Grokhotkov <ivan@espressif.com>
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Currently RunTool reads command's output with asyncio read, which
returns bytes. This is decoded into python's string and the output already
contains OS specific line endings, which on Windows is CRLF. Problem is
that the command output is saved by using python's text stream/file,
which replaces LF, native python's line ending, with OS specific line ending.
On Windows, and in this particular case, the CRLF from the command output is
translated into CRCRLF and saved in the commands output file. When this
file is read in again, e.g. for hint modules, the CRCRLF is replaced
with LFLF. Again the file is open as text file. Meaning a new emply line
is added.
Fix this by opening the output file with "newline=''", which prevents
this translation. We already have the OS specific line ending in the
command's output.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
1. Rename ESP_SLEEP_DEEP_SLEEP_WAKEUP_DELAY to ESP_SLEEP_WAIT_FLASH_READY_EXTRA_DELAY
2. Set ESP_SLEEP_WAIT_FLASH_READY_EXTRA_DELAY visible for all targets
When idf.py coredump-debug is launched with '--core' argument, it
tries to determine the file format (raw, elf, b64). To detect the
'raw' core dump the code checked if the version word matched one of
the known values.
However, the version word also contains the chip ID in the high
half-word, so the check failed for anything other than the ESP32.
The detection of core file format has been moved to esp-coredump
package in version 1.9.0, including the fix for chip ID.
Reported in https://github.com/espressif/esp-idf/issues/10852
Currently sbom manifest is checked only in .gitmodules and
this check is done in pre-commit and also in CI. Meaning it's running
three times(pre-commit before push if user has it enabled, in CI
as there is the pre-commit run again and again with test in CI). Since
esp-idf-sbom contains a full manifest validation support and pre-commit
plugin for it, let's use it. This removes all the current sbom testing
and replaces it with a signle pre-commit plugin which validates all
manifests files(sbom.yml, idf_component.yml, .gitmodules and also
referenced manifests) in repository. Note that this checks all
manifests, not only ones which were modified. The check is reasonably
fast though, so it should not cause any problem. The reason for
validating all manifest files is that we want to make sure that the sbom
information in .gitmodules is updated too and that the hash
recorded in .gitmodules is up-to-date. Meaning submodule update
would not trigger this plugin, because no manifest was changed.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
With 8959555cee7e[1] ("setup_git_directory(): add an owner check for the top..")
git added an ownership check of the git directory and refuses to
run any git commands, even parsing the config file, if the git directory
is not owned by the current user. The "fatal: detected dubious ownership in repository"
is reported.
This fixes CVE-2022-24765[2], which allows to compromise user account. On a
multi-user system or e.g. on a shared file system, one user may create a "rogue"
git repository with e.g. core.fsmonitor set to an arbitrary command. Other user
may unwillingly execute this command by running e.g. git-diff or
git-status within the "rogue" git repository, which may be in one of the parent
directories. If e.g. PS1 is set to display information about a git
repository in CWD, as suggested in Git in Bash[3], the user do not need to run
any git command to trigger this, just entering some subdirectory under
this "rogue" git repository is enough, because the git command will be
started transparently through the script used in PS1. The core.fsmonitor
can be set to arbitrary command. It's purpose is to help git to identify changed files
and speed up the scanning for changed files.
rogue
├── .git # owned by user1
└── dir1 # owned by user2
├── dir2 # owned by user2
└── .git # owned by user2
user1 sets core.fsmonitor for git repository in rogue directory
$ git config --add core.fsmonitor "bash -c 'rm -rf \$HOME'"
user2 enters dir1 and runs e.g. git diff and triggers the core.fsmonitor command.
The ownership check may cause problems when running git commands in
ESP-IDF Docker container. For example user may run the container as
root, but the mounted project may be owned by a particular user.
In this case git will refuse to execute any git command within the
"/project" directory, because it's not owned by root. To overcome this,
git allows to set safe.directories, for which the ownership check is
skipped. The security check may be completely disabled by setting
safe.directories to "*". This solution was proposed in PR 12636[4], but
it would allow make it possible to exploit this vulnerability again.
This fix allows user to specify git's safe.directory in IDF_GIT_SAFE_DIR
environmental variable, which may be set during container startup.
The IDF_GIT_SAFE_DIR has same format as PATH and multiple directories can be
specified by using a ":" separator. To entirely disable this git security check
within the container, user may set IDF_GIT_SAFE_DIR='*'. This might be
heplfull in CI.
Closes https://github.com/espressif/esp-idf/pull/12636
[1] - 8959555cee
[2] - https://nvd.nist.gov/vuln/detail/cve-2022-24765
[3] - https://git-scm.com/book/en/v2/Appendix-A%3A-Git-in-Other-Environments-Git-in-Bash
[4] - https://github.com/espressif/esp-idf/pull/12636
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Used esp-rom tag esp32s3-20210327 and did manual cleanup.
Rename s_usb_osglue to rom_usb_osglue like it was done for esp32s2.
Some comments in esp32s2 headers are synced from esp32s3.
GDB on Windows incorrectly reads EOL in the script files causing 'gdb'
action to fail.
(gdb) source .../build/gdbinit/py_extensions
(gdb) source .../build\gdbinit\symbols
add symbol table from file "...\build\bootloader\bootloader.elf"
.../build\gdbinit\symbols:6: Error in sourced command file:
Undefined command: "". Try "help".
Forcing line separator to '\n' resolved the issue
Signed-off-by: Michal Jenikovsky <jendo@jmsystems.sk>
Add changes to use fast_pbkdf2 as default for PMK calculations.
fast_pbkdf2 is significantly faster than current implementations
for esp chips.
Also removes unnecessary code for pbkdf-sha256 and pbkdf-sha512.
Currently idf.py reports just "Please use idf.py only in an ESP-IDF shell environment".
Sometimes it may be useful to know for which module the import failed.
Also the problem does not have to be related to shell environment only, but the
python venv can be corrupted. This adds a little bit more verbose error
message.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>