* Replaced crypotoauthlib with esp-cryptoauthlib
* Added menuconfig option for esp-tls about using HSM
* Added error codes for HSM in esp-tls,
* Added support to select different type of ATECC608A chips
* Added README, updated docs
* tcp_transport: Added option to enable secure_element for ssl
Closes https://github.com/espressif/esp-idf/issues/4432
When compiling esp_crt_bundle.c, it would end up with a different struct layout due
to configuration options from "mbedtls/esp_config.h" not being considered.
This lead to ca_chain potentially not being set correctly.
* Add options to mbedtls for hardware acceleration
* Disable mbedtls EC curves if hardware acceleration is selected
since the hardware will have to define the curves supported
* Add a hardware ecdsa example
Device name will be reset when deinit mesh stack. If not
initializing device name during the next mesh stack init,
it will fail to set the device name when using bluedroid.
Since bt_mesh_friend_init() will only be invoked when
a device is provisioned or Provisioner is enabled, so
we add a flag to indicate if the friend functionality
is initialized in case deinit before initialization.
Since the scripts of CI will bypass common_components when
trying to get ALL_EXAMPLES, and these BLE Mesh components
will only be used by other mesh examples, i.e. no need to
be compiled as a single example, so we rename the folder
to common_componnets.
Most ESP32 devices will also work at 80MHz, but third party boards/modules
may not have been tested at this speed so the default is kept at 40MHz for safety.
CoAP component relies on some mbedTLS crypto configuration
options, e.g. DTLS and PSK. These configuration options if
selected, have footprint impact on generic TLS examples like
https_request or https_ota as well.
Footprint of https_request example with/without change is per below:
$ ./tools/idf_size.py new_https_request.map --diff old_https_request.map
<CURRENT> MAP file: new_https_request.map
<REFERENCE> MAP file: old_https_request.map
Difference is counted as <CURRENT> - <REFERENCE>, i.e. a positive number means that <CURRENT> is larger.
Total sizes of <CURRENT>: <REFERENCE> Difference
DRAM .data size: 14796 bytes 14796
DRAM .bss size: 23560 bytes 23680 -120
Used static DRAM: 38356 bytes ( 142380 available, 21.2% used) 38476 -120 ( +120 available, +0 total)
Used static IRAM: 89045 bytes ( 42027 available, 67.9% used) 89045 ( +0 available, +0 total)
Flash code: 554231 bytes 563823 -9592
Flash rodata: 179000 bytes 181224 -2224
Total image size:~ 860632 bytes (.bin may be padded larger) 872568 -11936
This commit moves relevant config options to CoAP specific examples
and also adds some run time warnings if they are kept disabled.
Closes https://github.com/espressif/esp-idf/issues/5262
