This commit fixes how the USBH handling of a sudden device disconnection,
more specifically handling of device gone.
- Previously the USBH would only halt, flush, and dequeue the device's
default EP, then send a device gone event to the Host Library layer.
- Now the USBH will also halt and flush all non-default EPs, allowing
all of the URBs to be dequeud.
- Some internal object members are now protected by a mutex instead of
a spinlock.
Closes https://github.com/espressif/esp-idf/issues/7505
This commit fixes how the USB Host HCD handles sudden disconnections.
Bugs:
- HW channels remain active when the port suddenly disconnects, and
previously the channel would be disabled by setting the disabled bit,
then waiting for a disabled interrupt. However, ISOC channels do not
generate the disabled interrupt when the port is invalid, thus leading
to tasks getting indefinitely blocked in hcd_pipe_command().
Fix:
On a sudden disconnection, forcibly treat all channels as halted even
if their HCCHAR.ChEna bit is still set. We do a soft reset after a port
error anyways, so the channels will eventually be reset.
Closes https://github.com/espressif/esp-idf/issues/7505
This commit addes the 8/16 bit register field access workarounds to
the DWC_OTG peripheral. This workaround was applied to all other
peripherals in commit 874a720286.
The previous SMP freertos round robin would skip over tasks when
time slicing. This commit implements a Best Effort Round Robin
where selected tasks are put to the back of the list, thus
makes the time slicing more fair.
- Documentation has been updated accordingly.
- Tidy up vTaskSwitchContext() to match v10.4.3 more
- Increased esp_ipc task stack size to avoid overflow
Closes https://github.com/espressif/esp-idf/issues/7256
This commit removes the following critical nested macros as follows:
- portENTER_CRITICAL_NESTED()
- portEXIT_CRITICAL_NESTED()
They are replaced with portSET_INTERRUPT_MASK_FROM_ISR() and
portCLEAR_INTERRUPT_MASK_FROM_ISR() which are the proper FreeRTOS interfaces.
Created a portmacro_deprecated.h for each port to contain deprecated API
that were originally from portmacro.h
This commit fixes a bug in no-split and allow-split ring buffers free buffer size calculation.
When the free size available in the buffers less than the size of one item header,
the function prvGetCurMaxSizeNoSplit/AllowSplit() incorrectly returned the maxItemSize instead of 0.
This is due to the comparision between a negative and a positive value
where both operands are treated as unsigned during the comparision operation,
thereby treating the negative operand as a large integer.
Also added new unit tests to test buffer-full and almost-full conditions
where this scenario is likely to be hit.
Closes https://github.com/espressif/esp-idf/issues/7344
Closes https://github.com/espressif/esp-idf/pull/7371
FATFS provides a disk status and disk initialize callback which were not
implemented. Implementation has very low impact on SD/MMC speed and
fixes issues, when trying to open file when SD card was removed from
slot and not deinited.
If disk_status returns STA_NOINIT, it will always continue with
disk_initialize. If that returns 0, it will continue like everything is
working normally. So there has to be the same check as in disk_status.
Return of disk_initialize is always checked like this for STA_NOINIT or
STA_PROTECT so if command fails, we return the STA_NOINIT.
stat = disk_initialize(pdrv);
if (stat & STA_NOINIT) return FR_NOT_READY;
if (stat & STA_PROTECT) return FR_WRITE_PROTECTED;
Closes IDF-4125
This commit fixes issue where empty (unprogrammed) digest slot out of
multiple supported (e.g. 3 for ESP32-C3) could cause issue in
workflow enablement process.
Notes:
1. This issue was applicable for chips supporting "secure-boot-v2"
scheme with multiple digests slots
2. This issue was affecting only manual workflow, where digest of
public was pre-flashed in efuse
3. Change in "flash_encrypt.c" is only for additional safety purpose
Increase reset assertion time from 100µs (as specified minimum in the datasheet) to 150µs.
Some specimen of the LAN8720 need the reset signal asserted longer than 100µs to initialise properly. Otherwise they are in a zombie state where they are establishing and loosing an Ethernet link once in a seconds interval.
