Commit Graph

68 Commits

Author SHA1 Message Date
Roland Dobai
a1bddb923b Rename Kconfig options (components/bt) 2019-05-21 09:09:01 +02:00
morris
f5b03c9ea3 misc adjustment of esp32 component 2019-04-03 19:57:46 +08:00
morris
956c25dedd move esp32 chip specific includes to esp32/xxx.h 2019-03-18 17:14:05 +08:00
XiaXiaotian
b9b401ee39 Decouple WiFi and BT with coexist to reduce bin size
1. Do not link WiFi code when only BT or BLE is used and WiFi is not
used.

2. Do not link coexist code when CONFIG_SW_COEXIST_ENABLE is disabled.
2019-03-05 10:38:14 +08:00
wangmengyang
74eae4b50e component/bt: add more information and description for bluetooth modem sleep
Add remark that "EVED" mode for bluetooth modem sleep is only used for internal test
2018-12-21 19:30:20 +08:00
wangmengyang
561021e7f7 component/bt: use a pm_lock to prevent light sleep when bluetooth is enabled due to current imcompatibility 2018-12-17 19:54:57 +08:00
wangmengyang
b4299433bd component/bt: add DRAM_ATTR attribute to global variables(bss segment) in bt.c which can be accessed in ISR 2018-12-14 11:29:00 +08:00
wangmengyang
59f34461d7 component/bt: bugfix of bluetooth modem sleep not being able to work with Dynamic Frequency Scaling
1. start an esp_timer on entering sleep to acquire pm_lock before wake up from modem sleep
2. decrease the clock division of XTAL fed to bluetooth low power clock from 32us to 2us period to allow to work under 240MHz Max CPU frequency
3. decrease the minimum sleep duration threshold to allow shorter bluetooth modem sleep period, especially for BLE with short connection interval
4. reconfigure bluetooth baseband(BT-BB) settings after PHY/RF init upon waking up from modem sleep to avoid packet RX/TX performance degradation
2018-12-11 16:49:01 +08:00
yulong
0f3eb977cd component/bt: Added the ble full scan supported feature.
1. Add the full scan swith in the menuconfig;
2. Change the bt lib in order to support ble full scan
2018-11-30 20:48:42 +08:00
baohongde
df5839420d components/bt: Reduce IRAM size
libbtdm: 2608B
idf: 924B
2018-10-29 16:54:32 +08:00
zhiweijian
9103a04793 component/bt: add adv packet duplicate in scan duplicate 2018-09-11 02:31:11 +00:00
Hrishikesh Dhayagude
4abe47437f components/bt: Fix broken API esp_bt_mem_release() for parameter ESP_BT_MODE_BTDM
Problem:
The new API esp_bt_mem_release() that was added freed BTDM data to heap from esp_bt_controller_mem_release().
Now with the BT memory optimization commit ee787085f9,
the BTDM data is optimized and reduced to only 32 bytes which is not sufficient amount to be added to heap.
So, using the API leads to assert saying that the region is too small.

Solution:
Modify heap_caps_add_region_with_caps to return ESP_ERR_INVALID_SIZE in case the range is too small to create a new heap.
Do not assert if return value is ESP_ERR_INVALID_SIZE

This also fixes using API esp_bt_controller_mem_release() with ESP_BT_MODE_BTDM

Signed-off-by: Hrishikesh Dhayagude <hrishi@espressif.com>
2018-08-31 14:28:23 +00:00
me-no-dev
afa091fe79 prevent heap_caps_add_region exception if region is empty
Calling `esp_bt_controller_mem_release` or `esp_bt_mem_release` might result in exception if any of the regions returned to heap are empty. This happens usually if BT/BLE is enabled, but not used/linked in the final firmware.
2018-08-17 08:49:48 +02:00
Tian Hao
ee787085f9 component/bt : decrease memory consumption by conn number
1. BLE only with 9(max) connection will decrease 3K DRAM
2. BR/EDR only with 7(max) connection will decrease 16K DRAM
3. Any of BLE or BR/EDR connection number decrease will also decrease DRAM consumption
4. Decrease one BLE connection will save about 1KB DRAM
5. Decrease one BR/EDR ACL connection will save about 1.2KB DRAM
6. Decrease one BR/EDR SCO/eSCO will save 2KB DRAM.
7. fix some definition and kconfig
8. remove 1.2k of vhci tx cache and make .bss & .data to heap about 1.4K
9. modify BT Reserved Memory size and modify example to support new bt kconfig
2018-08-14 02:29:17 +00:00
Angus Gratton
a5ae5ac4b3 soc: Allow components to reserve fixed memory ranges that they need
No longer necessary to keep all reserved addresses in 'soc'.

Means 'soc' does not need to know about 'bt', for example.

Also means that Bluetooth can be enabled in config without any memory being reserved for BT
controller. Only if code calling the BT controller is linked in, will this memory be reserved...
2018-08-06 01:37:55 +00:00
Jiang Jiang Jian
b3dd6ff9fc Merge branch 'bugfix/btdm_controller_deinit' into 'master'
bt : fix bug that bluetooth controller init/disable/enable/disable may cause exception

See merge request idf/esp-idf!2800
2018-07-25 21:00:35 +08:00
Tian Hao
6e4342a877 bt : fix bug that bluetooth controller init/disable/enable/disable may cause exception
1. when one task do deinit/init/disable/enable, especially different cpu
core, it may cause controller crash in ISR handler
2. fix while BLE is scanning, bluetooth controller is disabled cause BLE
scan is not abort.
2018-07-20 14:10:55 +08:00
Hrishikesh Dhayagude
f610249bdd Reclaim BT/BTDM BSS and Data in bluetooth memory release function
1. Modify esp_bt_controller_mem_release() to release BTDM BSS and Data to heap if
ESP_BT_MODE_BTDM mode is passed to it
2. Add a new API esp_bt_mem_release() which internally calls
esp_bt_controller_mem_release() with the provided mode and then if mode
is ESP_BT_MODE_BTDM, releases BT BSS and Data to heap.

Background:
For Wi-Fi and BT/BLE applications, for e.g. the usecase is like when
Bluetooth is used for provisioning and once the device is connected to the Wi-Fi
AP, we can turn off Bluetooth completely. In such scenarios, it should be possible to
reclaim all the memory of Bluetooth. Although, currently this does not
happen.

Experiment:
Made the following modifications to examples/bluetooth/gatt_server :
1. Added support of simple_wifi to it
2. Moved all the bluetooth related code under CONFIG_BT_ENABLED config
option
3. Calculated the free heap in 2 similar scenarios:
   i. Disabled BT (CONFIG_BT_ENABLED undefined) and checked the free
heap after STA connected
   ii. Kept BT enabled and disabled it after STA connected and checked
the free heap
Ideally, the numbers for i., ii. above should have been similar. But
there was a delta of almost 30-31K. (i. > ii.)
4. Through make size-components checked the common BSS for libbta.a and libbtdm_app.a
and found it to be almost 30K. Data is around 1K

Solution:
1. Modified the linker script to mark the BSS and Data for these libraries and
free it when ESP_BT_MODE_BTDM mode is passed to mem release APIs.
2. Verified that the free heap is comparable for i. and ii. above.

Note: It is known that once this is done, Bluetooth can only be used
again post reboot.

Signed-off-by: Hrishikesh Dhayagude <hrishi@espressif.com>
2018-07-20 11:33:26 +05:30
Mahavir Jain
bd177a34c6 bt: fix OS abstraction layer for correct critical section API usage
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-07-01 19:07:51 +05:30
Tian Hao
e3df7d97a7 esp32: fix coex bug
1. fix BLE connection missing in coex mode
    2. modify other parameters to make coex priority more reasonable
    3. fix modem sleep procedure trap cause Wifi disable RF when BT is
    working. Such cause that BR/EDR is difficult to be connected, BLE
    connection stability decrease and so on.
    4. modify BR/EDR coexist duration to imrove BR/EDR connect success
    ratio.
    5. Due to the hardware coexist bug, BLE scan interval/window should
    be less than 0x100(about 160ms). Therefore, it will cause BLE cannot
    scan any advertising packet while WiFi have higher priority
    behaviour(such like RX beacon, scan, TX/RX VO packets and etc.).
2018-06-29 16:28:11 +08:00
Jiang Jiang Jian
9510f77f7a Merge branch 'bugfix/btdm_rm_assert_in_isr' into 'master'
bugfix/btdm_rm_assert_in_isr

See merge request idf/esp-idf!2633
2018-06-29 14:24:28 +08:00
wangmengyang
04ea784011 prevent Dynamic Frequency Scaling when using bluetooth modem sleep
This constraint will be elimiated after the issue is fixed
2018-06-28 18:08:18 +08:00
wangmengyang
02a620811d component/bt: remove the call of assert in time conversion functions which can be caused in ISR 2018-06-27 17:23:23 +08:00
zhiweijian
212b786119 Component/bt: fix throughput_demo_fail 2018-05-30 19:58:31 +08:00
zhiweijian
340ad5c430 Component/bt: fix scan duplicate 2018-05-21 15:23:15 +08:00
wangmengyang
4c4e143a2f component/bt: implement HFP Hands Free Unit Role 2018-05-21 11:33:30 +08:00
wangmengyang
22e21b38f7 component/bt: implement bluetooth modem sleep mode, one mode for BLE only and another for dual mode bluetooth
1. provide options for bluetooth low power mode
2. provide two options for bluetooth low power clock: main XTAL and external 32kHz XTAL
3. provide function and callbacks to control bluetooth low power mode, including enable/disable sleep, software wakeup request, low power clock settings, check power state, etc
4. modify vhci API vhci_host_send_packet to use blocking mode
5. note that DFS and bluetooth modem sleep can not be used together currently.
2018-05-19 15:37:26 +08:00
Liu Zhi Fu
ed46976f41 esp32/bt/driver: support static allocation of FreeRTOS queues used by ISR routine
Support static allocation of FreeRTOS queues used by ISR routine in WiFi/BT/esp_timer/driver etc
2018-04-27 15:02:30 +08:00
Tian Hao
e660785532 component/bt : add BR/EDR TX power set 2018-04-25 15:28:19 +08:00
Anton Maklakov
046ff2e628 Make error codes looks like literals in the code of them (easy for searching). Minor fixes, typos 2018-04-09 13:54:18 +10:00
island
9b7454de0c support wifi&bt coexist (v0.9.1)
1. refactor wifi modem sleep
2. refactor wifi and bt phy enable/diable coexistence
3. support wifi&bt coexist (v0.9.1)
3. add coex pause resume
4. fix bt library interrupt reaction slowly
5. make a2dp more smooth when coex
6. add coexist preference option
7. Make CI do not check libcoexist.a printf/ets_printf
8. disable Wifi RX AMPDU when software coexistence enable && update wifi lib
9. bluetooth call modem sleep api
2018-04-02 13:44:48 +08:00
Tian Hao
4b1ef083ee component/bt : add bluetooth controller library compile version 2018-03-27 16:35:00 +08:00
Hrishikesh Dhayagude
4a7d445301 components/bt examples/bluetooth: Fix typographical errors
Signed-off-by: Hrishikesh Dhayagude <hrishi@espressif.com>
2018-02-13 13:25:33 +05:30
Tian Hao
65bdb2d7ff component/bt : fix btdm mem release cause 0x3ffbbb28-0x3ffbdb28 add to region but should not.
1. fix the bug. Modify the condition that esp_bt_controller_mem_release() shoud be only called before esp_bt_controller_init() or after esp_bt_controller_deinit()
2. modify the example to use esp_bt_controller_mem_release()
2017-12-13 11:38:39 +08:00
Tian Hao
583dceb69b component/btdm : change bt.h name to esp_bt.h to form the name prefix 2017-12-08 10:33:50 +08:00
wangmengyang
bd6394db92 component/bt: clean up WIFI_CLK_EN_REG settings for Bluetooth
1. move settings of WIFI_CLK_EN_REG for bluetooth into controller init/deinit APIs
2. modify the bit mask used in phy_rf init/deinit to use WIFI-BT shared bits
2017-11-02 15:24:21 +08:00
Tian Hao
85eb5d4374 component/bt : fix bug of sw interrupt cause to run btdm to different cpu core.
1. add sw interrupt cause osi to controller.
2. modify the kconfig to improve the option view.
3. add option of the cpu core which bluedroid run.
4. add option of the cpu core which bluetooth controller run.
2017-10-24 16:13:58 +08:00
Ivan Grokhotkov
d503b991b4 bt: lock APB frequency while BT controller is enabled 2017-10-18 14:37:22 +08:00
Tian Hao
b54ef13fae component/bt : allow init after de-init 2017-10-10 15:35:17 +08:00
Tian Hao
3e2ee24e4f component/bt : support bluetooth controller DRAM release dynamically
1. remove CONFIG_BT_DRAM_RELEASE from Kconfig
2. add API to release bluetooth controller DRAM to heap
2017-09-21 14:31:20 +08:00
Tian Hao
b54719d00f component/bt : fix bluetooth controller enable limit && release memory when de-initialize bluetooth controller
1. fix bluetooth controller enable limit
2. release memory when de-initialize bluetooth controller
3. fix heap_caps_add_region limit
2017-09-19 21:14:28 +08:00
Tian Hao
b500d6558a component/bt : add osi_is_in_isr && fix vhci delay 2017-07-25 19:58:39 +08:00
Tian Hao
006a90e075 component/bt : add ble tx power && fix controller deinit mem leak
1. add ble tx power functions
2. add more osi functions.
3. modify bluetooth controller task procedure
4. fix a memory leak when controller deinit
5. add controller disable return value.
2017-07-18 20:22:28 +08:00
Tian Hao
808b07799c component/bt : fix task post bug && fix controller init protection
1. fix bluedroid task post to blocking.
2. use semphore protect btdm controller task when be called from higher priority task
2017-06-13 17:14:50 +08:00
Tian Hao
bd309731da component/bt : fix bug of task schedule delayed.
1. BLE RX test mode require quick task reaction, so allow higher priority task schedule from ISR.
2. Maybe other scenario also require this.
2017-06-07 14:58:17 +08:00
Tian Hao
d90a35af19 component/bt : modify bluetooth config style 2017-04-06 11:35:53 +08:00
Tian Hao
95d691afdb component/bt : support UART HCI and fix some bugs
1. support UART HCI, devolper need not to make a bridge between VHCI and UART.
2. fix bug of rand/srand called in ISR.
3. fix bug of BLE rx packets may cause assert.
2017-04-05 21:23:43 +08:00
Tian Hao
f5ebeb4c4d component/bt : add uart(1/2) as HCI IO directly 2017-04-05 21:23:42 +08:00
XiaXiaotian
d3eede2110 mac address: add the number of MAC address generated from efuse for user to choose
1. Add the number of MAC address generated from efuse for user to choose.

2. Add MAC address derive method.
2017-03-02 15:54:35 +08:00
wangmengyang
6d061ec903 component/bt: modify the bluetooth read_efuse_mac interface 2017-03-01 21:04:12 +08:00